T
Simple tool for a simple problem
It does only one thing, but does it well. And it does it's thing twice. I mostly use this power amp with two 1x8" cabs in stereo, from Line6 Stomp with amp modeling for my bedroom setup. I play with rather low volumes, but I can see that there's very much juice in tap. I haven't been able to test this unit in a live situation due to pandemic, but I'm sure there's plenty volume if I use e.g. two 2x12" cabs instead of the tiny cabs I use at home.
The mute switch is mandatory to use, as the amp will pop when powered on and squeal when powered off, even if the volume was at zero. Muting the amp before powering it off makes the pops and cap discharging noises go away.
I'm very happy with the amp, and I'm considering to get another unit to be able to run my amp modelers wet/dry/wet, or even wet/dry/dry/wet.
The only thing I'd change is the power socket. If this was directly compatible with e.g. Strymon 24V power cables, it would make my life easier, as I could mount this easier to my pedal board without using an adapter.
The mute switch is mandatory to use, as the amp will pop when powered on and squeal when powered off, even if the volume was at zero. Muting the amp before powering it off makes the pops and cap discharging noises go away.
I'm very happy with the amp, and I'm considering to get another unit to be able to run my amp modelers wet/dry/wet, or even wet/dry/dry/wet.
The only thing I'd change is the power socket. If this was directly compatible with e.g. Strymon 24V power cables, it would make my life easier, as I could mount this easier to my pedal board without using an adapter.
0
0
Raportoi ongelmasta
