Dynaudio 18S

Näytä käännös

Active Subwoofer

  • Exceptionally low low frequency range 16 Hz
  • Power: 500 W
  • Equipped with 2x 9.5" (24 cm) long-throw woofers
  • Class-D amplifier
  • Frequency range: 16 - 230 Hz (+/- 3 dB)
  • Maximum SPL (1m): 110 dB
  • Crossover frequency: 50 - 150 Hz adjustable low pass filter
  • Master/slave function
  • Extended DSP with presets
  • Connections: XLR, RCA
  • SAT output with switchable high pass filter
  • LCD
  • Auto on/off function
  • Dimensions (W x D x H): 470 x 268 x 333 mm
  • Weight: 20.5 kg

Lisätietoa

Components 2x 9,45"
Power 500 W
Frequency range 16 Hz

Nämä ovat muiden asiakkaiden valintoja:

Tätä tuotetta katsoneet asiakkaat ovat ostaneet nämä:

Dynaudio 18S
48% on ostanut tämän tuotteen
Dynaudio 18S
Samantien saatavilla
Samantien saatavilla

Tämä tuote on varastossa ja voidaan lähettää heti.

Tietoa lähetyksestä
1 399 € Lisää ostoskoriin
Dynaudio 9S
17% on ostanut Dynaudio 9S 849 €
Neumann KH 750 DSP
6% on ostanut Neumann KH 750 DSP 1 425 €
Presonus Temblor T10
4% on ostanut Presonus Temblor T10 379 €
KRK 10S2
4% on ostanut KRK 10S2 399 €
Suosituin tuotteemme Subwooferit
14 arviota
  • 5
  • 4
  • 3
  • 2
  • 1
4.8 /5
  • Ominaisuudet
  • Ääni
  • Työnjälki
Yhteensä
Ominaisuudet
Ääni
Työnjälki
Deep perfection
mrpropete, 30.10.2019
Very solid and good sounding sub. Highly recommend !
Auttava · Ei ole auttava · Raportoi ongelmasta
Raportoi ongelmasta...

Uskotko, että tämä arvostelu on epätarkka tai hyväksymätön jostain syystä?

Lähetä ilmoitus
gb Alkuperäinen arvostelu (Näytä käännös)
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
Yhteensä
Ominaisuudet
Ääni
Työnjälki
Kicks bASS
paparapa, 04.06.2020
I have no complaints about the build and sound quality. I have lots of positive things to say about them, but honestly, I can't be bothered at this point.
It arrived with default DSP firmware, and while I was playing with that for a couple of days I upgraded to the newest one at that time (and this time, unfortunately). It did bring improvements/features, but some went missing or introduced bugs.
While going through the settings and testing I noticed the following:
- missing 40-120Hz LPF, only Dynaudio speaker presets available. I was using 80hz one cause they didn't even bother making a BM5 MKIII preset. New FW forced me to settle for one of the speakers. Regardless, integration was very good in my case, but I can see how this may pose a challenge for someone wanting to use very low or high frequency - there aren't any!
- changing sub's sensitivity would change the sensitivity of speakers. This was no more, very good.
- auto-standby would kick in no sooner than 1h I believe. Now it's down to 10min - very good
- introduced HPF, which was a Godsend as it turned out. I was fighting nasty peak at ~40hz and whatever I'd do in sub's PEQ, it wouldn't go away entirely. I realized afterward that speakers still had a decent output at 40hz, no matter if HPF at speakers was engaged or not. Switched to sub's higher-order HPF, which stopped speakers in their tracks, so there was no more interference. PEQ worked with no issues all along - very good. Not so good was distortion right around 80Hz with HPF ON for the first time. Did a factory reset/power on/off and never heard it again
- SUBstantial improvement of performance below 40Hz. Bass didn't roll off below 40ish as it did before. Improved SPL handling at those frequencies. Before I could barely reach 90dB in my room at the lowest frequencies before overload protection kicking in at those frequencies, now it's closer to 100dB. Higher the input from there, the higher the frequency being clipped. Still, it did about 115dB at 40Hz and up, below is rolled off/clipped. Probably could've gone higher, but... neighbors. So don't expect from this fairly small enclosure to rock your world with 110dB of 20Hz goodness - very good anyway.
- screen doesn't time out after 5 seconds of inactivity while being in the middle of menu options, trying something out - very good

General:

- PEQ allows you to bring the level down to the middle of the Earth, but doesn't allow you to raise it at all. While I understand and agree that huge dips shouldn't be messed with, it would be useful to have +6dB option at hand for some different situations and purposes.

So, am I dissatisfied because I encountered some of the FW issues and bugs?! No, what so ever.
I brought the attention to Dynaudio regarding LPFilters missing, and they responded promptly, saying that they 'disappeared' from the update and that there will be a new one by the end of March if everything goes according to plan - obviously hasn't. I understand the Corona outbreak has been nasty, but it doesn't seem to justify why a feature-packed, 1400€, midrange-high end flagship doesn't have a properly coded firmware after 3 years?!
I agreed to postpone my review until after I get a hold on the new FW, but this is getting too much. Might revise it after they release it eventually.

Edit #1: Mostly grammar. Support assured me the update is going through the final testing and should be out by the end of the month. The job was bigger than anticipated. Hopefully, I'll eat my own words.

Edit #2: Update has been finalized, YAY. Couldn't find anything wrong with it, it's mostly bug fixes.
Added bm5 preset. Auto standby isn't variable anymore, it's fixed to 20min now That's about it.
If you want to get most out of your DSP, I'd recommend taking a look at KH750 DSP. I certainly wish I had.
Auttava · Ei ole auttava · Raportoi ongelmasta
Raportoi ongelmasta...

Uskotko, että tämä arvostelu on epätarkka tai hyväksymätön jostain syystä?

Lähetä ilmoitus
gb Alkuperäinen arvostelu (Näytä käännös)
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
Yhteensä
Ominaisuudet
Ääni
Työnjälki
Insanely good
Set Iron, 08.12.2019
This is an amazing sub.

It's mind-boggling how something of this size can reach so low and do it with such speed and authority.

I've owned 12", 15", even 17" that cannot reach this low. Sure, a 15+ will move more air an, but for a studio? You won't need more power than this - and the speed and precision it has can hardly be matched.
It compares favorably with a 15" Servo motor sub (Rythmik).

The integrated DSP is the cherry on top. I use an external DIRAC processor (and thus leave all processing disabled) but the advantage of being able to integrate it the proper way without additional equipment is very welcome (yes, it's precofigured to make it easier with dynaudio monitors, but you can configure it crossover precisely by hand).

For whatever reason very few subwoofers have proper, selectable low pass AND high pass filters. The one integrated in the 18S has selectable slopes, which is a great bonus.

I was conflicted between one 18S and two 9S... I'm still not sure I made the right call, considering I'm not taking advantage of the DSP at all, but I can always add another one and the performance is so good that living with my decision isn't hard at all.
Auttava · Ei ole auttava · Raportoi ongelmasta
Raportoi ongelmasta...

Uskotko, että tämä arvostelu on epätarkka tai hyväksymätön jostain syystä?

Lähetä ilmoitus
gb Alkuperäinen arvostelu (Näytä käännös)
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
Yhteensä
Ominaisuudet
Ääni
Työnjälki
Reachs very low end frequency
Hieronymus, 09.10.2018
To my surprise, this subwoofer is powerful and steady. It reach very low end frequency as what the parameter list says. And DSP is multifunctional which helps you get easy at setting room adaptability and solving with standing waves problem. Not only BM series speakers, many other speakers are quite suit with this subwoofer, such as ATC 25pro active, Genelec 8341a and KS digital C8-r.
Auttava · Ei ole auttava · Raportoi ongelmasta
Raportoi ongelmasta...

Uskotko, että tämä arvostelu on epätarkka tai hyväksymätön jostain syystä?

Lähetä ilmoitus
1 399 €
Kaikki hinnat sis. ALV:n
Samantien saatavilla
Samantien saatavilla

Tämä tuote on varastossa ja voidaan lähettää heti.

Tietoa lähetyksestä

llmainen toimitus Arvioitu lähetyspäivä Torstai, 29.04. ja Perjantai, 30.04.

Jaa tämä tuote
Yhteyshenkilösi
Puhelin: +49-9546-9223-30
Faksi: +49-9546-922328
Online-oppaat
Monitor Speakers
Monitor Speakers
In this guide we’ll outline the basic principles of studio monitors, and take a closer look at their most common features.
 
 
 
 
 
testitulokset:
* Näkyvissä hinnoissa ALV on mukana ja ovat voimassa niin kauan kuin tavaraa riittää. Kansainväliset toimituskulut saat klikkaamalla tästä. Emme ota vastuuta kirjoitusvirheistä tai epäselvästä tiedosta. Kaikki laskut kirjoitetaan EUR.
11
(11)
Juuri katsellut
Audient iD4 MKII

USB-C Audio Interface 24 bit / 44.1 - 96 kHz, ADC dynamic range: 121 dB, DAC dynamic range: 126 dB, @Class A Audient console microphone preamplifier, Mic Gain 58 dB,

Juuri katsellut
Roli Lumi 1 Snapcase Black

Roli Lumi 1 Snapcase Black; sturdy and magnetic cover around the LUMI Keys for a slim and seamless fit; protects the LUMI Keys during transport and storage; easily folds into a stand for mobile devices; dimensions (W x D x…

Juuri katsellut
Focal Alpha 50 Evo

Focal Alpha 50 Evo; active studio monitor; tweeter: 1" inverted aluminium dome tweeter 20W (Class D); woofer: 5" carbon fibre cone 30W (Class D); frequency range: 45 - 22000Hz (+/- 3dB); max. SPL: 101dB (peak @ 1m); Inputs: 1x Jack…

Juuri katsellut
Alesis Nitro Expansion Pack

Expansion set for Alesis Nitro Mesh Kit Consist of 1x 10" One-Zone Pad and 1x 08" ON zones Tom Pad, Includes necessary rack clips, cymbal holder, L-rods and cables

Juuri katsellut
Precision Devices PD.121/2 8 Ohms

Precision Devices PD.121/2 8 Ohms - 12" Speaker, Power Rating: 300W RMS, Impedance: 8 Ohms, Frequency Response: 100Hz - 6kHz, Sensitivity: 99 dB (1W1m), Weight: 9.2 kg

Juuri katsellut
Patona Premium Akku V-Mount 95Wh

Patona Premium Akku V-Mount 95Wh BP-95W; V-mount battery with USB output; capacity: 95 Wh / 6600 mAh; voltage: 14.4 V; USB output: 5 V / 2.1 A; mount: V-Mount; 4-stage LED charge level indicator; eight cells; maximum discharge current: 10…

Juuri katsellut
Warm Audio WA-MBA

Warm Audio WA-MBA; professional broadcast microphone boom; easy-to-operate clamping hinges; hidden cable management system;, Connectors with 3/8" and 5/8" thread, suitable for all common microphone mounts; integrated table clamp; Colour: black; Weight: 2.5 kg

1
(1)
Juuri katsellut
Harley Benton AirBorne Go

Harley Benton AirBorne Go, hd modeling desktop guitar amplifier with built-in 2,4ghz wireless instrument system, bluetooth 4,2 dual mode connectivity, airborne go app for advanced tone editing, drum machine & rechargeable battery function, great features for wireless practice & play-along…

1
(1)
Juuri katsellut
L.R.Baggs Voiceprint DI

Impulse Response di pedal for acoustic guitar Voiceprint DI measures the acoustic response of your guitar by leveraging the processing power of your iPhone® to accurately capture your guitar’s one-of-a-kind voice., Notch filter, Anti-feedback function, Phase circuit, Serial FX…

Juuri katsellut
MOTU UltraLite mk5

USB 2.0 Audio Interface With USB C connector, ESS Sabre32 Ultra DAC technology, 24 Bit / 44.1 - 192 kHz, Precise level meters for all analogue inputs/outputs with high-resolution OLED display, 2 Microphone / line / Hi-Z inputs via…

Juuri katsellut
Soundboks Backpack

Soundboks Backpack; fit all generations of Soundboks speakers; ergonomic comfortable design; easy to use and safe attachment of the speaker; made of stainless steel, nylon straps and foam pads; dimension (WxHxD): 510 x 430 x 220 mm; weight: 2,9kg; colour:…

Juuri katsellut
Electro Harmonix Ripped Speaker Fuzz

Electro Harmonix Ripped Speaker Fuzz; Effects Pedal for Electric Guitar & Bass; low Fuzz settings emulate Vintage Lo-Fi Distortion Sounds created by a Razor Blade applied to a Speaker Cone, a loose Tube or a faulty channel on a Recording…

anna palautetta
Palaute Löysitteko virheen tai haluatteko antaa palautetta?

Odotamme palautettanne ja korjaamme mahdolliset virheet pikimmiten.