Sperzel Guitar Tuners 3/3 Trimlock SB

69

Clavijas de afinación Sperzel TrimLock

  • Para guitarra eléctrica
  • 3 derecha / 3 izquierda
  • Rueda de sujeción en la parte trasera
  • Ratio: 12:1
  • Diámetro del eje: 2,7mm
  • Para taladro de 10mm
  • Fabricadas en USA
  • Color: Negro satinado
Disponible desde Octubre 2006
número de artículo 198295
Precio por 1 Unidad(es)
111 €
Sin gastos de envío e incluyendo IVA.
En stock
En stock

Este producto está en stock y puede ser enviado inmediatamente.

Información sobre envíos
Previsión de envío el Sábado, 20.04.
1

69 Valoraciones de los clientes

4.8 / 5

Para poder evaluar un producto deber estar registrado en su centro de clientes.

Importante: Con fin de evitar evaluaciones en base a rumores o mitos populares, solo permitimos en nuestro website evaluaciones por clientes que hayan comprado el producto con nosotros.

Tras de acceder a su centro de clientes encuentra en Centro de clientes "Evaluar productos" todos los artículos que puede evaluar.

Fabricación

27 Reseñas

AS
En general bien, pero el acabado es mejorable
Antonio S.P. 07.03.2016
Tengo clavijas con bloqueo en todas mis guitarras, pero nunca había probado este sistema de Sperzel. El bloqueo lo realiza un tornillo que se acciona mediante una rueda en la parte trasera. Bastante sencillo y práctico, muy cómodo de usar.

El accionamiento de las clavijas es en general bueno aunque irregular, unas van notablemente más suaves que otras. Nada grave, por otra parte. El accionamiento de la rueda de bloqueo no da mucha impresión de robustez, aunque para su finalidad probablemente no es necesaria. De hecho ni siquiera es conveniente, porque el tornillo corta las cuerdas más delgadas si se aprieta demasiado. En general el producto no da mucha impresión de robustez y buen acabado, aunque es pronto para saber si dará problemas con el tiempo.

La instalación es muy sencilla, la caja incorpora una pequeña plantilla de cartón para ubicar el orificio del pivote de anclaje. Pero la pintura de las tuercas de fijación salta con mucha facilidad, simplemente al apretarlas ya ha saltado en varios puntos. Personalmente no me importa, pero para una instalación profesional puede ser un problema.
Fabricación
0
0
Reportar evaluación

Reportar evaluación

google translate gb
Lamentablemente hubo un error. Por favor, inténtelo de nuevo más tarde.
T
Among the best tuners money can buy
Thomas855 08.01.2011
I bought these for my LTD MH1000NT because the original ESP locking tuners dindn't hold the tuning very well. You can easily convert this 3/3 set into a 6L set or any combination you want. You simply unscrew the slotted screw, push the shaft through the housing and push it back in from the other side, now you can assemble ist the way it was and you're good to go! The reason for this was: if you buy a 6L set, the posts are staggered and you don't need that for angled headstocks.
So the installation was very easy, you have to drill a little hole into the back of the headstock (a drilling telmplate is included) and you can align it with the included guide edge.
The quality is awesome, these tuners are lightweigt and hold the tuning very well. Restringing the guitar takes less than 5 minutes now!
Fabricación
3
0
Reportar evaluación

Reportar evaluación

google translate gb
Lamentablemente hubo un error. Por favor, inténtelo de nuevo más tarde.
Z
Replacement for stock tuners on HB Fan-fret baritone
ZiltoidTheOmniscient 27.06.2018
The tuners that came with the guitar mentioned in the title were prone to 'dead-zones' where you'd turn the peg and hear no change. Plus they were regular old wrap-around tuners.

Fitting these required a little bit of drilling, since the hole offsets were different from the stock tuners, but it was no big deal since the packaging came with a template to show you where to put the holes.

Since I was fitting them to a baritone which uses very large gague strings on the bottom end, I was slightly horrified to discover that the bottom B string didn't fit into the hole on the tuning peg! Fortunately using a 1mm (or perhaps 1.5mm, can't quite remember) drill bit I was able to make the hole big enough without damaging it.

Locking tuners in general are great and I recommend them to anyone who changes strings frequently.
Fabricación
0
0
Reportar evaluación

Reportar evaluación

google translate gb
Lamentablemente hubo un error. Por favor, inténtelo de nuevo más tarde.
O
Great quality made in USA
Obiwankenobi 10.06.2017
I was in dilemma to buy Sperzel or Schaller and finally I decide to buy affordable ones Sperzel, but I did not regret. Guitar tuners are so fine made, every detail are at place and the most important is that tuners keeps my guitar strings in perfect tune after hours and hours of playing. Great quality, worth money.
Fabricación
2
0
Reportar evaluación

Reportar evaluación