Wittner Violin Tuning Pegs 4/4 8,6

23

Violin Fine Tuning Pegs

  • For 3/4 - 4/4 violin
  • Diameter 8.6 / 1:30
  • Complete set of 4 pegs
  • Very easy, fast and precise tuning
  • Gear ratio from 8.5 to 1, compared to a conventional peg
  • Peg made of Hi-Tec composite material and light metal alloy
  • Installation in the pegbox without adhesive, only by pressing as with a conventional peg
  • Self-locking gear, the string cannot unwind
  • No wear on the peg hole and pegs, as the shaft does not rotate, thus no friction
  • Not affected by climate
  • Design, dimensions, colour and qualities remain consistent
  • Shaft length: 47 mm
Fås siden September 2016
Artikelnummer 397784
salgsenhed 1 stk
material hi-tec composite-material
size / scale 4/4 - 3/4
model, style or type Wittner finetuning-pegs
shaft-diameter 8,6 mm
number of items 4
825 kr
Inkl. moms. Obs! Yderligere fragtomkostninger 60 kr
på lager
på lager

Produktet er på lager og klar til afsendelse.

Information om forsendelse
Forventet levering mellem torsdag, 21.03. og fredag, 22.03.
1

23 Kundebedømmelser

4.8 / 5

Du skal være logget på, for at kunne vurdere et produkt.

BemærkVi tillader kun vores kunder, at afgive en vurdering af det udstyr de har købt hos os. Vi modtager ikke anmeldelser eller vurderinger af produkter fra tredje kilde.

Efter login finder du også i kundencenter under "vurderinger af produkt" alle artikler, som du kan afgive en vurdering af.

håndtering

forarbejdning

20 Anmeldelser

google translate gb
Der opstod en fejl. Prøv igen senere.
BV
About time too!
Brian Voce 03.12.2017
Thank goodness violins are beginning to catch up with the modern world. For so long twisting a 'stick in a hole' has been the crude tuning method used on Violins, Violas etc. These Wittner Tuning Pegs make tuning so easy and accurate. Very easy to fit to a standard modern violin and with care and a router easy to fit to an older 'non standard instrument'. (I had to re cut the holes to the correct taper in my son's vintage violin). I realise the 'traditionalists' will 'huff and puff' at using these tuning pegs on an old quality violin but they have no effect on the sound quality of the instrument, make tuning much much easier, and allow you to fit a quality tailpiece without those sound altering string adjusters, so what's not to like?
håndtering
forarbejdning
3
0
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
B
No more finetuners
BrianOQR 10.10.2018
I love these pegs, and have all of my violins fitted with them. It is a bit scary as they are mechanical mean if they stop working, i am out of luck. It is too bad that they look a little too plastic but mostly people don't even notice. Functionally it works amazing, my violin is almost always in tune and tuning is extremely easy. Also the fact that I can use a standard tail piece without the volume reduction of other fine tuners. If you look at it from a technical point of view, the pegs have pretty much 0 effect on sound so it makes sense that the fine tuning happens in the pegs so the sound is 100% your original violin.
håndtering
forarbejdning
2
0
Anmeld bedømmelse

Anmeld bedømmelse

google translate fr
Der opstod en fejl. Prøv igen senere.
P
l'accord parfait
Philippe4033 29.04.2017
J'ai acheté ces chevilles pour remplacer celle d'un oud avec lequel je m'arrachais les cheveux pour réussir à l'accorder. La mise en place est d'une simplicité enfantine : il suffit d'enlever l'ancienne cheville et d'insérer la nouvelle. Pas besoin de colle ou quoi que ce soit : le diamètre externe de la nouvelle cheville se bloque comme le font les chevilles traditionnelle et la partie interne de la nouvelle cheville tournera avec en plus la démultiplication.
L'accord est super fin et très agréable et l'opération qui prenait 2 h avant prend 10s maintenant (et oui, il y a 11 chevilles sur un oud)

Qualité allemande, précision suisse : que du bonheur
håndtering
forarbejdning
6
0
Anmeld bedømmelse

Anmeld bedømmelse