Schaller F-Series Locking Tuners 6L CH

113

Clamping Machine Head Set for Electric Guitar

  • 6 Pieces
  • Configuration: 6 Left
  • Schaller Article no. :10560220.01.50
  • Exact replacement machine heads, original look and dimensions
  • Construction: Enclosed
  • Wing: M6 Metal Small
  • Ratio: 1:18
  • Shaft length: 19.5 mm
  • 2nd Shaft length (staggered): 21.0 mm
  • Bore: 9.8 mm
  • For maximum headstock thickness of 15.4 mm
  • Mounting: Pin(s) & locking nut
  • Surface finish: Chrome
  • Includes banjo bolts and washers
  • Made in Germany
Fås siden Februar 2014
Artikelnummer 333821
salgsenhed 1 stk
Colour Chrome
949 kr
Inkl. moms. Obs! Yderligere fragtomkostninger 60 kr
på lager
på lager

Produktet er på lager og klar til afsendelse.

Information om forsendelse
Afsendelse forventet onsdag, 17.04.
1

113 Kundebedømmelser

4.8 / 5

Du skal være logget på, for at kunne vurdere et produkt.

BemærkVi tillader kun vores kunder, at afgive en vurdering af det udstyr de har købt hos os. Vi modtager ikke anmeldelser eller vurderinger af produkter fra tredje kilde.

Efter login finder du også i kundencenter under "vurderinger af produkt" alle artikler, som du kan afgive en vurdering af.

forarbejdning

84 Anmeldelser

K
Fantastic upgrade for Fender Telecaster
KasperF 08.01.2020
I bought these locking tuners as an upgrade to my Fender American Professional Telecaster. Installation was very easy, they were a direct swap with the ones that came with the Fender. No drilling required.

The only thing I felt could be improved by Schaller was some indication of which string each tuner was intended for. This set is staggered, but it was unclear from the packaging exactly how. Turns out there are 3 short and 3 long ones, but I was initially a bit confused if the 3 short ones were the exact same length or not.

In terms of tuning stability they works great. The tuners that came with the Fender had a bit of wiggle room on the pole and string would loose tension when left alone for a few days. With these locking tuners this no longer happens. Super happy I decided to upgrade!
forarbejdning
0
0
Anmeld bedømmelse

Anmeld bedømmelse

A
Perfect quality
Anonym 25.01.2017
I bought these tuners for a telecaster-building project, which is now, happily completed.
They are very nicely made, with nice surface and good quality chrome, and adds a sense of quality to my guitar head.
The locking mechanism works perfectly.
At installation, beware that these tuners do not use a screw to avoid rotation as many other tuners do. Instead they have two little metal tabs that have to fit into the guitar head, and which you have to make (drill) little holes for, However, once installed they are very elegant, and will never be able to rotate,
When the strings have been installed "finger tight" you only have to rotate them about a quarter of a turn (about 4-5 full turns of the tuner head, which has a nice 1:16 gearing) and you will be in tune, and STAY in tune (except for string-stretching, which is less than on traditional tuners, since the twirls around the tuner-head are avoided).
The tuners axis is shortened, compared to a traditional tuner (since you dont need the string to swirl around it several times) so the angle from the nut, even to the high E tuner (on a telecaster head) is enough to avoid using a string-tree, and hence avoid friction from this.
forarbejdning
0
0
Anmeld bedømmelse

Anmeld bedømmelse

F
Working just fine
FlatBeat 06.04.2021
Mounted these on an old Hohner ST special, they did the job. Had to drill some holes.
forarbejdning
0
0
Anmeld bedømmelse

Anmeld bedømmelse

PD
Top kvalitet
Per Duun 15.11.2016
De fleste basser og guitarer jeg har, har fået opgraderet tunerne, hvilket gør det lettere at stemme og så holder stemningen også længere end ellers.

En opgradering jeg klart kan anbefale hvis dine tunere er lige lovligt billige.
forarbejdning
0
0
Anmeld bedømmelse

Anmeld bedømmelse