Samson S-Patch Plus

Patch Bay

  • 48 Channels
  • Fully balanced
  • Switchable to normalised, semi-normalised and Through mode operation
  • Switchable: Normalised mode, Half-normalised mode and de-normalised mode
  • 1/4" TRS connectors
  • 19" Rack mount 1 RU

Yderligere info

Number Of Channels 48
Type Of Connector Jack
Normalizing Mode Yes
Digital Patchbay No
Soldering Required No
Design 19" / 1U
172 Kundens vurdering:
  • 5
  • 4
  • 3
  • 2
  • 1
4.8 / 5.0
  • betjening
  • features
  • forarbejdning
102 tekstanmeldelser Læs alle anmeldelser
gb Automatisk oversat (Vis original)
gbOriginal anmeldelse (Vis oversættelse)
Der opstod en fejl. Prøv igen senere.
I alt
betjening
features
forarbejdning

Samson S-Patch + wonderful

Rob J., 11.03.2015
I've contemplated buying a patchbay (PB) for years. It took me a while to try & understand the "nomal" "half normal" & " thru" modes that are offered on these items. I thought i understood it enough to purchase one, yes there are cheaper PB you can buy but i decided to go for the Samson as it had the configuration switches on the front of the unit. My research noted that some PB have these on the top so only accessable with the unit not rack mounted. Or leaving space above to access within the rack. Other types have you physically remove & rotate modules from the back. So i paid slightly more to make my life & configuration easier. I'm glad i did. It's a solid item, very well made & looks great.
Step one was planning all my output & input connections for the PB. I did this in MS Excel but a pen & paper would work too. If you've never used a PB before i would recommend this route. I have a 16 channel mixer & lots of synths. As i don't require them all making sound at once i decided to only bring channels 1-8 from the mixer into the PB. Normally Top row are outputs from gear & the bottom row are inputs (when using the patchbay in a "nomal" or "1/2normal"). So on the PB 25-32 correspond to my 1-8 mixer inputs. Directly above these i have connected some of my main synths & modules on the PB that is 1-8. These are configured as "normal" so connect directly into the mixer. I plan to have my outboard effects connected at the opposite end of the PB. Again these will be normal. My mixer has high gain inputs on channel 1& 2 so i want to bring the channel inserts from the mixer to the PB so i can patch together a compressor etc when i'm recording guitar or bass. This should leave some unused space on the PB in the middle. I'm probably going to run my other synths into the PB set as "thru". I can then just patch them into a mixer channel by the use of a patchlead when required. This patchbay has certainly changed my life. I can't believe i didnt buy one sooner. No more fumbling around the mixer jacks trying to plug something new in anymore. I have a synth output PB1 which is normaled into PB25 this goes into my mixer channel 1 by default. I picked up my guitar the other day & took the 1/4" jack & plugged it into PB25 - bam - guitar breaks the synths connection & lets me input the guitar into mixer channel 1. Just great & speeds up your workflow.
PROS: Brings inner calm & happness to your studio. Killer piece of kit!!!
CONS: I think i need another Samson S-Patch patchbay ! You can almost double the amount of cables required in your studio.
Nyttig · Ikke nyttigt · Anmeld bedømmelse
En "forkert" vurdering.

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig?

send melding
gb Automatisk oversat (Vis original)
gbOriginal anmeldelse (Vis oversættelse)
Der opstod en fejl. Prøv igen senere.
I alt
betjening
features
forarbejdning

High quality patch bay on the cheap

borg64, 10.11.2013
Featuring all the 'usual suspect' modes (Normal, Half normal and Thru), the S-Patch Plus is a reliable 1/4" TRS patch bay for little money. All inputs and outputs are balanced (but will naturally work just fine with unbalanced cabling as well), and there is no apparent degradation in audio fidelity, at least when running short cable lengths between all connected devices.

If you're finding yourself piling up on hardware effects, routing everything through one or more patch bays will help immensely when experimenting with your FX chain. The sheer routing possibilities can be somewhat mindblowing at first, so you may want to start off your patch bay planning by jotting down all the units (e.g. audio interface, hardware compressors and EQs, FX pedals etc.) that you'll want to include in your future routing scheme, before you start running cables. This will save a lot of time and grief when it's time to actually hook everything up. After a week, you won't be able to work without it. I deliberately left a couple of inputs and outputs 'empty', thus creating a 'testing ground' of new toys available on the front of the rackmounted patch bay. This way, I can also simply insert guitar pedals directly to the bay's front, adding more creative effects on a whim without having to worry about what's connected to the back.

My only gripe - and indeed, this is a first world problem - is that there is precious little space to label the ins and outs. But that's what you get on a 48 point device in 1U size. Oh, and while the unit itself won't set you back much, factoring in the expense of all the cabling will. But alas, such is studio life.
Nyttig · Ikke nyttigt · Anmeld bedømmelse
En "forkert" vurdering.

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig?

send melding
Inkl. moms plus 8 € forsendelse
portofrit fra 199 €

Prisen i DKK er kun en indikation

Til omgående levering
Til omgående levering

Varen er på lager og kan afsendes med det samme.

Information om forsendelse
Del dette produkt
Kontaktperson
Tlf: +49-9546-9223-30
Fax: +49-9546-922328
Downloads
Downloads
 
 
 
 
 
Testresultat:
Tilbud inkl. moms ER gældende så længe lager haves. Vi påtager os intet ansvar for trykfejl.
Native Instruments Traktor S4 MK3 BluGuitar Amp1 Mercury Edition Native Instruments Komplete Kontrol A49 Dreadbox Erebus V3 Nux B3 microphone wireless system Roland VT-4 Zoom H3-VR M-Audio M-Track 8x4M Behringer NX3000 Behringer MX882 V2 the t.racks DSP 206 XVive U3 Microphone Wireless System
(3)
Anbefalet
Native Instruments Traktor S4 MK3

4-Channel DJ controller and audio interface HAPTIC DRIVE: motorised jog wheels with haptic feedback for a new way of mixing, RGB LED ring around each jogwheel for visual feedback, High-resolution colour displays, Deck FX & Mixer FX, Pro mixer...

til produktet
898 €
(2)
Anbefalet
BluGuitar Amp1 Mercury Edition

BluGuitar Amp1 Mercury Edition; hybrid amplifier head for electric guitar; versatile, fully analogue amplifier in a pedal format, adjustable boost, reverb, three integrated footswitches, speaker simulation for recording applications, new Nanotube valve power amplifier, PowerSoak Attenuator; 4 channel; power: 100...

til produktet
699 €
(3)
Anbefalet
Native Instruments Komplete Kontrol A49

Compact Controller Keyboard Newly developed semi-weighted keyboard with 49 keys, OLED display, 8 Touch-sensitive dials, Pitch and Mod Wheels, 4D push encoders, Smart play, Machine integration, Control of Logic ProX, Ableton Live, Garage Band, Cubase and Nuendo, Power supply...

til produktet
189 €
Anbefalet
Dreadbox Erebus V3

Analogue Desktop Synthesizer Fully analogue, two-part paraphone synth, 3 Oscillators, 2 Oscillators with individual glide, 12 dB Resonance multimode filter (LP and HP), 2 envelopes (1xADSR and 1xADSR for AMP), Lo-Fi echo, White noise noise generator, LFO, Clock generator,...

til produktet
499 €
(2)
Anbefalet
Nux B3 microphone wireless system

Wireless Transmission System 2.4 GHz plug-on system for dynamic microphones, Ready-to-use set of transmitter and receiver, 2.4 GHz band suitable for worldwide license-free operation, 32-Bit / 48 kHz high-resolution audio quality, 6 Channels, Range: Up to 30 m, Latency...

til produktet
179 €
Anbefalet
Roland VT-4

Roland VT-4; Voice Transformer; desktop effects processor for vocal effects; intuitive and creative handling via sliders, knobs and buttons; Vocoder-, Pitch-Shifting-, Harmonizer- effects and more; adjustable reverb effects; 8 user settings storable; up to 6 hours of battery operation (4x...

til produktet
246 €
Anbefalet
Zoom H3-VR

Multi-Channel Mobile Recorder Allows easy creation of spatial audio recordings, Recording and processing of 360 ° audio material for VR, AR and mixed reality content, 4 Integrated microphones in Ambisonics arrangement, 3 Recording modes: Ambisonics, Stereo Binaural or Standard...

til produktet
358 €
Anbefalet
M-Audio M-Track 8x4M

USB Audio Interface High-quality converters with 24-bit / 192 kHz resolution, Hi-Speed ​​USB-C connection, Direct monitoring, Central large volume control, +48V Phantom power for channels 1-4, 4x Microphone / line input (XLR / TRS combo socket), 2x Instrument input...

til produktet
319 €
(3)
Anbefalet
Behringer NX3000

Power Amplifier Lightweight 2-channel Class D amplifier, Power: 2x 900 W at 4 Ωs, 2x 1500 W at 2 Ωs, Inputs: Jack and XLR, Outputs: Speaker Twist, Integrated crossover, Integrated limiter, Mains, signal and limit LEDs, Design: 19" /...

til produktet
188 €
Anbefalet
Behringer MX882 V2

Behringer MX882 V2, 8-channel splitter / mixer, 8 in / 2 out line mixer and 2 in / 8 out line splitter, each channel can operate independently in mixer or splitter mode, usable as 6 in / 6 out level...

til produktet
83 €
Anbefalet
the t.racks DSP 206

Digital Speaker Management System 2x XLR Inputs, 6x XLR Outputs, 96 kHz Sampling rate, 32-bit DSP, 24-bit AD/DA converter, USB and RS232/485 interface, Ethernet-interface, Design: 19" / 1 RU

til produktet
299 €
(5)
Anbefalet
XVive U3 Microphone Wireless System

Digital Wireless Microphone Transceiver System Works without battery or mains power, For use with dynamic microphones, Integrated rechargeable lithium battery, Range up to 20 m / 70 ft (without obstacles), Frequency bandwidth: 20 Hz - 20 kHz, Latency: <5...

til produktet
199 €
Feedback Har du fundet en fejl eller har du kommentarer til denne side?

Tak for din feedback! Vi løser problemet snarest muligt.

Skriv en kommentar. Indtast din e-mail adresse.