Millenium PB16 XLR

114

Start 360°

Vis oversættelse

16-Channel Patchbay

With balanced XLR inputs and outputs (female front, male rear)
Type: 19" / 1 HU

30 30 dages-Money Back garanti

3 3 års Thomann garanti

Fås siden August 2017

Artikelnummer 409571

salgsenhed 1 stk

Number Of Channels 16

Type Of Connector XLR

Normalizing Mode No

Digital Patchbay No

Soldering Required No

Design 19" / 1U

B-Stock from 514 kr tilgængelig

599 kr

Inkl. moms. Obs! Yderligere fragtomkostninger 60 kr

Forventet levering mellem mandag, 29.04. og tirsdag, 30.04.

Salgsrang

i Patchbays

Pakker & tilbud

Millenium PB16 XLR B-Stock
Hhv. med lette brugsspor

514 kr

114 Kundebedømmelser

5 91 Kunder 4 19 Kunder 3 3 Kunder 2 1 Kunde 1 0 Kunder

4.8 / 5

betjening

features

forarbejdning

Retningslinjer for anmeldelser

62 Anmeldelser

Maybe overkill but it does the job

Jørg 16.04.2024

Needed some inputs at the front for wireless mic and IEM system, since I decided have the mixer in it’s own rack to have less to carry when a venue provides everything else but the IEM.
Only needed 4 in/outs, but for the PB16’s price it was a no-brainer, might be handy to have the spare in/outs too.
Sound goes through clear, so works as supposed.

Anmeld bedømmelse

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig? Vær venlig at skrive i det følgende kommentarfelt hvorfor og hvis muligt din email-adresse, så vi kan give dig en tilbage melding til din kommentar.

Uundværlig dims i ethvert set-up, studie eller live

Peter BM 23.11.2018

Superkasse til superpris. Letter arbejdet både i studiet og live fordi den interne cabling kan forblive stationær, mens patchbay modulet fungerer som et krydsfelt/telefoncentral.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Difficult to turn around

Ensnared 07.09.2019

I bought this to use in a dedicated monitoring rack to have outputs to FOH from two microphone splitters used as input, but assumed turning it backwards would be no problem (the inputs are in front, I needed them in the back with the outputs in front). Luckily it was possible by dismantling it and turning the internal PCB with the connectors around and putting it back together, although the screws that secure the PCB to the chassis would no longer fit as they are not in the middle but offset towards the back. Fortunately that shouldn't matter much since the 64 screws in total that secures the connectors to the chassis should be enough. Still though, I'd like to see it be slightly more flexible, perhaps by having the ears on separate brackets that can be turned around (like the ART P16 patchbay has).

Regardless, this unit is way cheaper than the ART P16, so I guess I can't complain, and it does suit my purpose after doing my own modification.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Great patchbay

Koesbeenian 10.11.2020

Great patchbay. I re-built this one bringing the male connectors to the front and the female to the back. Easy to do. Great solution for me. There is nothing to say about handling and features; it's a patchbay

Anmeld bedømmelse

Læs alle anmeldelser

Millenium PB16 XLR

16-Channel Patchbay

114 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

62 Anmeldelser

Smart Navigator

Artikel historik

Handl og betal sikkert

Dine fordele

Service

Serveret med kærlighed!

Millenium PB16 XLR

16-Channel Patchbay

Tilbehør og matchende produkter

114 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

62 Anmeldelser

Sammenlign valgmuligheder

Smart Navigator