Jaspers 4R-120B

Keyboard Stand with Lockable Wheels

  • For 4 keyboards
  • Material: Black anodised aluminium
  • Height: 140 cm
  • Width: 130 cm
  • Inner width: 120 cm
  • Depth: 50 cm
  • With hand wheels
  • With memory clamps for the upper supports
  • The lower support, reinforced with a second tube, has a pair of 60 cm support arms and is also suitable for particularly heavy keyboards
  • Other holders are 40 cm long
  • All supports are adjustable in height and inclination
  • Maximum load: Lower support up to 40 kg, upper supports up to 15 kg
  • Colour: Black
  • Made in Germany
  • Further compatible optional accessories (not included): Further support arm pairs, support reinforcements, monitor holder, microphone boom, sheet music stand, laptop holder

Yderligere info

Keyboard Supports 4

Det har andre kunder besluttet sig for

Det køber andre, som har set på dette produkt:

Jaspers 4R-120B
38% købte nøjagtig dette produkt
Jaspers 4R-120B
Til omgående levering
Til omgående levering

Varen er på lager og kan afsendes med det samme.

Information om forsendelse
351 € Put i indkøbskurven
K&M 18810
9% købte K&M 18810 118 €
Jaspers 4R-140B
8% købte Jaspers 4R-140B 355 €
Jaspers 170-4-120B
7% købte Jaspers 170-4-120B 375 €
Jaspers 4D-145B
7% købte Jaspers 4D-145B 219 €
Vores mest populære Keyboardstativer
5 Kundens vurdering:
  • 5
  • 4
  • 3
  • 2
  • 1
4.2 / 5.0
  • håndtering
  • stabilitet
  • forarbejdning
Dette produkt har endnu kun tekstanmeldelser på et andet sprog.
4 tekstanmeldelser Læs alle anmeldelser
gb Automatisk oversat (Vis original)
gbOriginal anmeldelse (Vis oversættelse)
Der opstod en fejl. Prøv igen senere.
I alt
stabilitet
forarbejdning
håndtering

Bought and Regret Greatly

Arsxxi, 09.05.2017
I had the idea of buying the tier Jaspers stands in order to replace my RTX and Quiklok stands in X and then win the place below to put my rack devices below in a limited place. I chose the models 4R-120B & 3R-140B and once received in Paris (Thomann delivery service as always, the Top) sent them back to my secondary studio, small but in full nature, very inspiring for the creation.
Arrived on the spot it is a cold shower that awaits me, and here are the points to consider:
Unpacking. The tiny notice that does not correspond to the model chosen, no spare part, nor a single screw in case of breakdown. Missed 2 nuts (convenient to find them in the countryside). Poor presentiment.
The height of the lower part is limited for the lowest keyboard, and does not allow you put yourself normally before the piano, very poor calculations of the engineer (he never played the Piano evident). Without calculating the human knee height, you are then offered, stay on the knee-like rapper typing the keyboard with a finger. Impressive. No way to mount keyboard, because there is no room for other keyboards and it is not modular (nothing modular, see below).
Tube quality is mediocre. Aluminum too thin (nothing common like Roland drums stands for example) which I cut, in order to adjust their width, with a simple kitchen knife. Tube surface is too slippery and does not clamp well to clamps. My keyboards have different width (and depth) then, to refine the stand by trying to make it semi-modular, I cut the long tubes in half at the center by putting inside what I found in the country pantry, -the tube of my old vacuum cleaner, much better in metal quality by the way. So I could adjust stand width.
At Jaspers, there are no fixers to ensure the stability of their construction. I had to drill the holes in the tubes and put the folding nails in order to troubleshoot the constructive genius signed by Jaspers.
The allowable weight for the superposed keyboards is announced at 15kg max. Well, but it is my Minimoog Model D that remains at the limit under the risk of falling on my head. Who calculated these inappropriate weights? For the generalized weights for serious synths are, for example - Yamaha SY77, Oberheim OB12, Korg Z1 - each of 17 kg at least! These engineers from Jasper never approached musicians and their instruments before developing their product? No, it's not that the tablets only and nano synths that musicians use to announce the cruel reality! Why not to ask Musicians before building for them?
Without horizontal fixers on the tubes, the keyboards inevitably slip under their weight and arrive in perfectly twisted position on each level which does not add admiration neither to the concert public nor especially to the lucky owner of Jaspers stand.
It's really unstable too because of the construction itself: the superposed keyboards are placed on the tube facing A in causing a diving effect, when your whole stand, being overloaded begins to tilt towards you DANGEROUSLY. Normally low tubes should be heavier (hee, not the case, and why do) to stabilize this sordid creation. I put sand in low tubes to troubleshoot stability as one can, discovering at the same time that the casters are of cheap plastic type furniture of 3 cents without resin nor the screws. What stability can be talked about? Everything moves. I finally hooked the back of the stand with the cord to the ripe to not have the worst surprises, but how to do on the stage for example? To What musician will tie his stand? An idea? This is the direct question to Jaspers Engineering C °.
The arms of 40 and 60cm - are not modular either. Only one hole in the middle, not even three. I looked for the drill to confine those arms. Hello DIY. It is highly frustrating. The price required for a pair of these arms is nice 34 euros though ... The depths of synths being different, how do you adjust their position to see anyway the panels of your instruments? I'm exaggerating? Since the panels are virtually hidden from seen in Jaspers version?
No, it is a pure and also un-natural catastrophe.
In summary: the production of this brand is an Absolute FIASCO in engineering and in quality. The prices are way too high without being even justified. For me it is my money and my nerves that are lost but also the cheating and non-respect of the clients.
If I could ask for the refund! Or ?ll do these stands end their lives in the garbage? Or will it help me to put some pots and pans on top of it? (Too risky though). Looked, I gave Full constructive ideas to Jaspers house, can be in thanks and EN counterpart it refunds me my ¤ 597.70 anyway? I offer free ideas for improvement of their stands, is it valuable?
We'll see there.
In any case in current version I strongly discourages to buy the Jaspers stands, at least that their construction would not be reviewed from A to Z, the quality would be compliant ("made in Germany" - by whom?) And the price Adjusted to reality.
I ask Thomann to advance this note to Jaspers and demand that their production conform to the requirements of professional musicians. Or urgently mark: "amateur stand for light keyboards and boards". Thank you.
Nyttig · Ikke nyttigt · Anmeld bedømmelse
En "forkert" vurdering.

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig?

send melding
gb Automatisk oversat (Vis original)
gbOriginal anmeldelse (Vis oversættelse)
Der opstod en fejl. Prøv igen senere.
I alt
stabilitet
forarbejdning
håndtering

Great stand

05.09.2016
Flexible, light and stable!
Nyttig · Ikke nyttigt · Anmeld bedømmelse
En "forkert" vurdering.

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig?

send melding
351 € 2.614,63 DKK
portofrit og inkl. moms

DKK priser er vejl. priser

Til omgående levering
Til omgående levering

Varen er på lager og kan afsendes med det samme.

Information om forsendelse
Del dette produkt
Kontaktperson
Tlf: +49-9546-9223-33
Fax: +49-9546-9223-24
Online-rådgiver
Controller Keyboards
Controller Keyboards
At the simplest level, a controller keyboard, also commonly known as a "master" keyboard.
Online-guide
Controller Keyboards
Controller Keyboards
At the simplest level, a controller keyboard, also commonly known as a "master" keyboard.
 
 
 
 
 
Testresultat:
Tilbud inkl. moms ER gældende så længe lager haves. Vi påtager os intet ansvar for trykfejl.
Schoeps CMC54 Mono Set MK4 CMC5 Marshall Origin 20C Combo Adam T5V Subpac M2X Roland R-07 black Yamaha Stagepas 600BT RME ADI-2 DAC Heritage Audio HA-73 EQ Elite Focal Listen Professional Epiphone Richie Faulkner Flying V Marshall Origin 20H Head the box pro DSP 18 Sub
(1)
Anbefalet
Schoeps CMC54 Mono Set MK4 CMC5

Schoeps CMC54 Mono Set Limited Edition, high quality condenser small diaphragm microphone comprising CMC 5 mic preamp Refurbished (new housing and refurbished) and MK4 capsule (new) cardioid, specifications CMC 5: power consumption 4mA, 48V phantompower, max. output level 1V, length...

til produktet
990 €
Anbefalet
Marshall Origin 20C Combo

Tube combo amp for electric guitar Gain boost function, Two voicings (Normal, High Treble), which can be mixed steplessly via the tilt control, Switchable power reduction for full sound in any environment, 1 channel, Power: 20 watts, Preamp tubes:...

til produktet
645 €
(3)
Anbefalet
Adam T5V

Active Nearfield Monitor Equipped with: 5" woofer and 1.9" U-ART ribbon tweeter, 2x Class-D amplifiers: 50W RMS woofer, 20W RMS tweeter, Frequency range: 45 - 25000 Hz, Crossover frequency: 3 kHz, Maximum input level: 106 dB (1m/pair), Rear bass...

til produktet
169 €
Anbefalet
Subpac M2X

Subpac M2X, Mobile tactile bass system, SubPac adds real depth, connection and enjoyment to whatever you play through it - your music and media comes to life with the added dimension of physical bass. Frequency Response: 1hz-200hz, Wired Input: 3.5mm...

til produktet
399 €
(1)
Anbefalet
Roland R-07 black

Portable MP3 / WAV Recorder with Bluetooth Functionality Stereo recordings up to 24 Bit / 96 kHz in WAV format or up to 396 kbps in MP3 format on microSD / SDHC card, Built-in stereo microphone, Integrated hybrid limiter,...

til produktet
235 €
Anbefalet
Yamaha Stagepas 600BT

Mini-PA System with Bluetooth Function Consisting of 2x passive 2-way boxes and 10-channel power mixers, Power mixers and speaker cables can be stored in the boxes for transportation, Successor of the Stagepas 600i, Including 2 speaker cables, each 6...

til produktet
799 €
(3)
Anbefalet
RME ADI-2 DAC

High-end DA converter & headphone amplifier Sample rates: 44.1 kHz up to 768 kHz, Playback of DSD and Direct DSD, SteadyClock FS, LCD display with AutoDark function for lighting, Desktop Case, Dimensions: 215 x 52 x 150 mm, Weight:...

til produktet
999 €
Anbefalet
Heritage Audio HA-73 EQ Elite

Heritage Audio HA-73 EQ Elite; 1-Channel Mic-Preamp wit EQ; based on the 1073; hand wound Carnhill Transformers; 3 stage fully discrete class A mic preamp; max. Gain: 80 dB Mic and 50 dB Line; -20 dB Pad; LO-Z switches the...

til produktet
945 €
Anbefalet
Focal Listen Professional

Headphones Closed, Circumaural, Conversion technology for acoustic transparency and dynamics, Impedance: 32 ohms, Sensitivity (@ 1 kHz - / 1 Vrms): 122 dB SPL, THD (THD, @ 1 kHz / 100 dB SPL): 0.3%, Frequency range: 5 Hz to...

til produktet
258 €
(1)
Anbefalet
Epiphone Richie Faulkner Flying V

Electric Guitar Body and neck: Mahogany, Fretboard: Ebony, Neck profile: Thin C, 22 Jumbo frets, Scale: 628 mm, Pickups: Active EMG 57 (bridge) and EMG 66 (neck) humbucker, Floyd Rose 1000, Grover Rotomatic machine heads, Colour: Black, Incl. Deluxe...

til produktet
935 €
Anbefalet
Marshall Origin 20H Head

Tube Amp Head for Electric Guitar Gain boost function, Two voicings (Normal, High Treble), which can be mixed steplessly via the tilt control, Switchable power reduction for full sound in any environment, 1 channel, Power: 20 watts, Preamp tubes:...

til produktet
547 €
Anbefalet
the box pro DSP 18 Sub

Active subwoofer Speaker assembly: 18", Power: 800 W / 3200 W (RMS / Peak), Maximum level: 128 dB, Frequency range: 30 - 150 Hz, Connections: XLR (L + R) in, XLR (L + R) throu and XLR (L +...

til produktet
375 €
Feedback Har du fundet en fejl eller har du kommentarer til denne side?

Tak for din feedback! Vi løser problemet snarest muligt.

Skriv en kommentar. Indtast din e-mail adresse.