Hicon HI-J63SA05 Angled Jack

142

Start 360°

Vis oversættelse

Angled jack

Extremely flat 6.3 mm angle jack
Stereo
For cable diameters from 4.0 - 6.4 mm
Especially suitable for floor effects

30 30 dages-Money Back garanti

3 3 års Thomann garanti

Fås siden December 2015

Artikelnummer 377803

salgsenhed 1 stk

Installation No

Mono/Stereo Stereo

Angled Yes

Type TRS (stereo/sym.)

Plug Jack 6,3 mm TRS male angled

22 kr

Inkl. moms. Obs! Yderligere fragtomkostninger 60 kr

Afsendelse forventet lørdag, 20.04.

Salgsrang

i Jackstik/ -bøsninger 6,3mm

142 Kundebedømmelser

5 86 Kunder 4 34 Kunder 3 12 Kunder 2 8 Kunder 1 2 Kunder

4.4 / 5

forarbejdning

Retningslinjer for anmeldelser

84 Anmeldelser

Absolutely perfect!

Kristian S 10.10.2021

This is a smaller angled jack. I have not used any other jacks on patch cables for the last 10 years at least and not one of them have stopped working - not even one left to rust (after removing the corrosion with some sanding paper it looked as good as new.
I takes some practice to get the soldering just right, but thanks to the clamping effect of the housing, it will stay like that forever.
Highly recommended.

Anmeld bedømmelse

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig? Vær venlig at skrive i det følgende kommentarfelt hvorfor og hvis muligt din email-adresse, så vi kan give dig en tilbage melding til din kommentar.

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

ground contact is missing

t3hh 23.03.2022

contact for soldering the ground wire is missing. The best solution would be soldering the ground into the nickel plated case but this is somewhat complicated process. You need to use acid based active flux (rosin based flux wont work) and more powerful iron. Don't forget to clean the flux after the soldering, it contains acid and will corrode. Some people leave the ground wire unsoldered and use the pressure to make a ground connection but this can not be suggested for critical audio work.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Can’t recommend

daTroll 09.05.2021

Only get this if you have no other choice, e.g. if the space is limited. There is no solder lug for the sleeve/shield, so you either try to solder it anyway or just let the shield get crimped when you screw the plug pieces together. Another big problem is quality. One of the plugs I bought wasn’t manufactured correctly in that the tip was loose and could be rotated together with its solder lug. O_o

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Quality good but design not so

Bo E. 04.05.2016

For all my patch cables I use the mono variant and couldn't be happier! The stereo ones however... You have two solderpoints, one L and one R but the earth has no real soldering contact and has to be pressed against the enclosure of the jack to make contact... which fails eventually... I swear by the mono ones for all my patch cables but the stereo is not recommended !

Anmeld bedømmelse

Læs alle anmeldelser

Hicon HI-J63SA05 Angled Jack

Angled jack

142 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

84 Anmeldelser

Smart Navigator

Artikel historik

Handl og betal sikkert

Dine fordele

Service

Serveret med kærlighed!

Hicon HI-J63SA05 Angled Jack

Angled jack

Tilbehør og matchende produkter

142 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

84 Anmeldelser

Sammenlign valgmuligheder

Smart Navigator