Kundecenter log-in

Harley Benton PowerPlant

Vis oversættelse

Power Adapter

Everone buys pedals one after the other, but then sooner or later the question is: How do I power them? Batteries are always empty (and expensive, as well as they're not environmentally friendly) - and the power strip with 5 power supply units also doesn't look really sexy in the pedal case. For guitarists who love their many colourful stomps and always want to have them around, the Power Plant is just the right thing.

Eight (!) 9V outputs provide a total of 500 mA, plus a 12V AC and a 12V DC output for the most exotic of power consumers; with that you are prepared for all eventualities.

A whole bunch of adapter cables available in various sizes is included. Its the optimal solution for most pedal cases at an extremely affordable price!

  • With 8 x 9V DC (500 mA), 1 x 12V DC (500 mA) and 1 x 12V AC (500 mA) outputs
  • Incl. cable set (length of black cables about 50 cm, colored cables about 30 cm)
  • Dimensions: 16.5 x 8.5 x 5.0 cm

Note: The polarity changes using the supplied cable extensions!

Yderligere info

DC/AC current AC/DC
Output current in mA 500 mA
9 V Yes
12 V Yes
18 V No
Secondary voltage No
Multi-output power supply Yes

Sammensæt selv Creative Bundle og spar

Hvis du bestiller denne vare sammen med andre varer i bundlet, kan du spare yderligere op til 5 %!
Harley Benton SpaceShip 40 + Harley Benton Mounties + Harley Benton PowerPlant +
8 flere
4126 Kundens vurdering
  • 5
  • 4
  • 3
  • 2
  • 1
4.3 /5
  • forarbejdning
I alt
forarbejdning
Cheap PSU with Good build quality ? can be a bit buzzy
13.01.2017
This is a pretty cheap PSU compared to the price of a PSU with isolation between each output, so you can?t expect the same performance as with more expensive PSU?s, but you do get very good value for money.

I got the PowerPlant because I was running all my pedals on battery power and changing all the batteries when you have the pedals on a board is a pain.

The PowerPlant dos the job of distributing power to the pedals on the board, but it can be a bit buzzy ? depending on the actual guitar, pedal and amp setup in can vary from no noise at all to annoyingly noisy.

The noise level is not just about the PSU the pedals have an effect to, I have some pedals that have no noise issues, but I have an old pedal that draws a lot of power and if I add this pedal the noise is of the chart ? so this is currently running with it?s own power supply.

I currently have the Power plant mounted on the underside of a Palmer Pedalbay 40 board, where it is mounted with the standard straps that comes with the pedalbay board.

If you can afford a PSU with isolation and have power hungry pedals, I would recommend spending the extra cash to get less of the PSU buzz.
Nyttig · Ikke nyttigt · Anmeld bedømmelse
En "forkert" vurdering.

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig?

send melding
I alt
forarbejdning
Hmm...
SebastianRasmussen, 10.04.2018
Jeg købte denne for et godt stykke tid siden og var egentlig ret godt tilfreds. Den virkede som den skulle og jeg var glad for at slippe for 9 volts batterierne.

Jeg havde desværre kun brugt den i en uges tid, før at den stod af. Jeg anede ikke hvad der gik galt, men det virker som om at den tog en af mine pedaler med sig, som ikke har fungeret ordentligt siden. Jeg havde desværre smidt mit garantibevis væk, så jeg kunne ikke få en ny.

Jeg ved ikke om jeg bare var uheldig, eller at den ikke er lavet ordenligt. Jeg ville nok bare finde mig en dyrere en.
Nyttig · Ikke nyttigt · Anmeld bedømmelse
En "forkert" vurdering.

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig?

send melding
I alt
forarbejdning
Cheap alternative to other power supplies
26.04.2016
I ran out of flex cables for my old power supply, and instead of buying additional ones i decided to try out the HB Powerplant.

The good thing is that you get a lot of power outputs very cheaply - which is of course the most important thing - but there are also a couple of drawbacks:

The fact that the power chord for the powerplant is seperate means that is takes a longer time to pack and unpack, and the flex cables are a bit loose when plugged in. This is a bit of a concern, but so far it has not caused me any problems.

Another thing i have experienced is that when more flex cables than needed are plugged in (and the amp is turned up loud), a pulsing sound is coming from the speaker. This is only a 'problem' when not playing, as it is not a very loud pulsing sound.

Overall, it is a good power supply at its price.
Nyttig · Ikke nyttigt · Anmeld bedømmelse
En "forkert" vurdering.

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig?

send melding
I alt
forarbejdning
A must have for lovers of stompboxes
davidhorizon, 26.08.2020
Does what it promises. A good and cheap solution for powering your stompboxes
Nyttig · Ikke nyttigt · Anmeld bedømmelse
En "forkert" vurdering.

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig?

send melding
B-Stock from 313 kr tilgængelig
339 kr
Inkl. moms plus 60 kr forsendelse
Tilgængelig
Tilgængelig

Varen er på lager og kan afsendes med det samme.

Information om forsendelse

Forventet levering mellem onsdag, 29.09. og torsdag, 30.09.

Kontaktperson
Tlf: +49-9546-9223-20
Fax: +49-9546-9223-24
 
 
 
 
 
Testresultat:
* Alle priser er inkl. moms inkluderet Forsendelsesomkostninger . Fri fragt for alle ordrer over 1.480 kr Tilbud så længe lager haves. Der tages forbehold for eventuelle trykfejl, unøjagtigheder og andre fejltagelser. Faktura bliver udstedt i DKK.