Allparts CTS 500K Audio Taper Pot

238

Potentiometer

  • 500 KΩ
  • Logarithmic
  • Knurled shafts
  • CTS Potentiometers are the first choice on many American guitar models
  • Low tolerance for less dispersion and more precision
  • Total height: 30 mm
  • Total diameter: 23.5 mm
  • Threaded shaft length: 9.5 mm
  • Thread diameter: 9.5 mm
  • Shaft diameter: 6 mm
  • Allparts-Nr. EP-0086-000
Fås siden April 2017
Artikelnummer 411573
salgsenhed 1 stk
Design Split Shaft
Resistance Value 500 kOhms
Characteristic Curve Logarithmic
Thread Length 9,0 mm
Tandem Poti No
Push/Push No
Solderless No
shaft type grooved
75 kr
Inkl. moms. Obs! Yderligere fragtomkostninger 60 kr
på lager
på lager

Produktet er på lager og klar til afsendelse.

Information om forsendelse
Forventet levering mellem torsdag, 4.04. og fredag, 5.04.
1

238 Kundebedømmelser

4.8 / 5

Du skal være logget på, for at kunne vurdere et produkt.

BemærkVi tillader kun vores kunder, at afgive en vurdering af det udstyr de har købt hos os. Vi modtager ikke anmeldelser eller vurderinger af produkter fra tredje kilde.

Efter login finder du også i kundencenter under "vurderinger af produkt" alle artikler, som du kan afgive en vurdering af.

forarbejdning

100 Anmeldelser

B
God kvalitet.
BorisSGD 22.07.2021
Jeg har lige udskiftet alle fire potmetre i min Chibson, og de her rammer plet. Jeg skiftede også caps'ene og det hele virker, så alt er godt.
forarbejdning
0
0
Anmeld bedømmelse

Anmeld bedømmelse

PD
CTS - off course
Per Duun 31.03.2020
CTS is my guaranty for the best possible quality. Wouldn't use any other brand.

Use them in my guitar repair shop. Price is fair.
forarbejdning
0
0
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
T
Good quality pots but definitely not "low tolerance".
TCSMD 11.10.2021
These are good quality pots, as expected from CTS. The tolerance isn't quite as tight as I would ideally want though. I normally buy CTS pots with tighter tolerances from other sources but I was running out of 500k pots and didn't have a new shipment coming in soon enough for a couple of jobs with high priority so I took a chance on these.

The actual values I got varied from 481k to 542k which isn't really tight enough for my needs. If one of my customers specifies 500k for an electronics upgrade I need the actual values to be a little closer than this. I guess it's within the tolerance for standard CTS pots but Thomann have these pots listed as "low tolerance" which they are most definitely NOT so that's one star off the total ratings for the misleading marketing.

To sum it up: The quality of these pots is very good but if you need them to actually be close to 500k you had better look elsewhere for pots with tighter tolerances (or buy a lot of them and hope you win the lottery).
forarbejdning
5
0
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
C
Big Improvement over cheap pots.
Christiansen 19.11.2020
I got a second hand Washburn with Seymour Duncan pups on it and I wasn't impressed how was the sound out of it. Not like I'm a professionist (more likely an sunday player) but the price was really low and guitar was in pristine condition so I bought it. The wiring was really bad and the pots were something no name and really tiny. So, I bought this pots, remade the wiring with SD wiring specs and damn, thru my computer with GR5 (dont have an amp yet) it's a big difference in how it sounds. It's a different quitar to be honest and high sounds are more clearer, changing the tone is actually making a difference (I got a Orange drop 22nf on it) and overall the quitar is turning out to be a 100% best deal. I don't know if the new wiring made this big change in sound, but I guess this new pots and cap made a huge difference. On the downside, I had to make the holes in the guitar and knobs a bit bigger for them to fit, but I knew that before ordering, couldn't find pots to fit exactly.
forarbejdning
0
1
Anmeld bedømmelse

Anmeld bedømmelse