Doepfer A-199 Spring Reverb Module VE

Start 360°

Vis oversættelse

Spring reverb module in Eurorack format

By way of spiral springs electronically recreates the reverb effect
Spring system with 3 separate springs
Reverb signal can be fed back to the input
Width: 8 HP
Depth: 50 mm
Power requirement: +80 mA (+12V) / -10 mA (-12V)

30 30 dages-Money Back garanti

3 3 års Thomann garanti

Fås siden Juli 2016

Artikelnummer 394677

salgsenhed 1 stk

Reverb Yes

Delay No

Multieffect No

Misc. Effects No

Width 8 TE / HP

Vis varianter af dette produkt

Doepfer A-199 Spring Reverb Module VE

Doepfer A-199 Spring Reverb Module VE Spring reverb module in Eurorack format * By way of spiral springs electronically ...

1.099 kr

til produktet

122

Doepfer A-124 Wasp Filter SE

Doepfer A-124 Wasp Filter SE Wasp Filter * Special edition * Special 12 dB multimode filter * Circuit technology of the ...

666 kr

til produktet

Doepfer A-160-2 Clock Divider II

Doepfer A-160-2 Clock Divider II Frequency Divider * For clock/trigger/gate signals * Width: 4 TE/ 4 HP / 20 mm...

749 kr

til produktet

Doepfer A-138s Mini Stereo Mixer

Doepfer A-138s Mini Stereo Mixer Mini Stereo Mixer * 4-in-2 mix module in Eurorack format * Four inputs with attenuator ...

599 kr

til produktet

Doepfer A-138M

Doepfer A-138M Matrix Mixer * With 4 rows and 4 columns * Unipolar / Bipolar mode switchable on each column * Suitable f...

1.090 kr

til produktet

Doepfer A-198 (Module + Manual)

Doepfer A-198 (Module + Manual) Trautonium Controller * Consists of Doepfer A-198 Module and Ribbon Controller * Ribbon ...

1.590 kr

til produktet

Doepfer A-156

Doepfer A-156 Dual Quantiser The A-156 Module is a dual control voltage quantiser. A quantiser converts a continuous inp...

899 kr

til produktet

Doepfer A-151

Doepfer A-151 Quad Sequential Switch Module * Electronic 4-position rotary switch * Trigger input * Reset input * 4 Inpu...

444 kr

til produktet

117

Doepfer A-180-2 Multiples

Doepfer A-180-2 Multiples Passive Multi-Port Distributor * 8x Interconnected jacks * Sockets are divided into 2x quadrup...

266 kr

til produktet

Doepfer A-178 Theremin

Doepfer A-178 Theremin Theremin Module * Produces variable control voltage when hand is moved around the antenna * Range...

749 kr

til produktet

Doepfer A-156 Vintage Edition

Doepfer A-156 Vintage Edition Dual Control Voltage Quantizer * Vintage edition with black front plate * Converts a conti...

979 kr

til produktet

Doepfer A-106-5 SEM Filter Special Ed.

Doepfer A-106-5 SEM Filter Special Ed. Filter * 12 dB Multi-mode filter, in which the circuit of the SEM module is used ...

675 kr

til produktet

1.099 kr

Inkl. moms. Obs! Yderligere fragtomkostninger 60 kr

Forventet levering mellem mandag, 29.04. og tirsdag, 30.04.

Salgsrang

i Effektmoduler

24 Kundebedømmelser

5 17 Kunder 4 6 Kunder 3 0 Kunder 2 1 Kunde 1 0 Kunder

4.6 / 5

betjening

features

lyd

forarbejdning

Retningslinjer for anmeldelser

22 Anmeldelser

tjak 26.02.2021

Great metallic sound. The RCA connectors on the back makes the Eurorack module quite deep when connected to the external spring module.

betjening

features

lyd

forarbejdning

Anmeld bedømmelse

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig? Vær venlig at skrive i det følgende kommentarfelt hvorfor og hvis muligt din email-adresse, så vi kan give dig en tilbage melding til din kommentar.

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Bursting with character

Zoë 02.06.2013

Spring reverb is NOT like pristine digital reverb. Don't get it for that, but do get it. When added to the end of a patch, you can use it as a strange, otherworldly, organic reverb that leaves a metal taste in your mouth. But this is a modular synthesiser, so you're not confined to that. You can instead put it before the VCA, which stops it being reverb and starts it being a strange little creature that makes your patch sound more organic or real-world in a way that's hard to identify. It stops sounding like a synthesiser and starts sounding like a weird thing that might physically exist. In short, it introduces some complicated real-world physics into the mix.

So let's look at this particular spring reverb by Doepfer. The build quality isn't great, and it might benefit from a little re-soldering. If you're into modular synths, which are a pretty niche market, this probably won't be too difficult for you. It works just fine straight out of the box, but looks like you need to treat it carefully if you're not confident repairing it yourself later down the line.

Having said that, the features are great. The "emphasis" knob EQs the midrange, I believe, making it sound brighter if need be. As well as the regular inputs and outputs, there are extra ones for the feedback loop, so you can amplify the signal to lengthen the tail, filter it with any filter you already have, and so on. These simple features make it very open ended.

I also hear it's pretty easy to swap out the reverb tank -- the physical spring reverb in a metal case, that you plug into the main module -- for a different one, should you want to, for even more possibilities. Personally, though, I haven't found the need: this module is already providing me with so many things to try out, that I've still only begun to scratch the surface.

Spring reverb in general has a very distinctive sound, so check out some examples online before you decide whether this is for you. Personally, I'm making it a big part of the latest evolution of my signature sound.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Dark, muddy and brooding

Martyn Q. 01.10.2015

The a199 has a lovely dark spring sound, the provided spring tank is a great match and starting point for a collection of tanks. Spring reverb is not the clean realistic sound associated with reverbs today - its clangorous, shonky and unmistakably mechanical in nature. The A199 is slightly l less feature filled than some other spring reverb modules available (no vc of feedback amount or wet/dry mix, no tank selection etc - all easily patchable though) - but a fraction of the cost. Follow the mounting instructions carefully to avoid unwanted artifacts (they are very susceptible to interference) - I've opted for keeping the tanks out of the case. You may consider also buying a decent external phono switch so you can have multiple tanks linked to the unit at once - saves popping the module out to change tanks.

I love playing with the feedback path of the a199 - it can even play self patched, great for drones... A typical drone patch for me would go:

A199 with no audio being fed to it, high feedback -> feedback insert goes to a vca -> A189-1 bit mangler -> Freqshifter -> A106-5 sem filter -> feedback return of the A199. Modulate away on the modules in the feedback path and the results are stunning - so organic, dark and ethereal.

I also like using it to add body to drum sounds or synthesised pianos, keep feedback low and run the mix output to a vca to shape the level contour.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Nice little blast from the past

guybblue 15.05.2013

It's a spring reverb for your modular!

To be honest, it's hard to think of more to say than that. It works, and it sounds just like the spring reverb built into the Carlsbro keyboard amp I had when I was a teenager. The only point to be aware of when mounting this unit is that the spring tray itself needs to live somewhere -- it's attached to the module by a generous 60cm flying lead, but if you're housing it within your modular rack, it needs to go as far from the PSU as you can get it so that you don't get any induced hum. It may be sonically cleaner, if aesthetically more cluttered, to put it outside the rack entirely -- which has the added advantage of letting you smack it with your hand without killing all your precious valve-based modules. Once that's sorted out, though, you're in for lots of spoingy, boingy fun, for not much money. What's not to love?

Anmeld bedømmelse

Læs alle anmeldelser

Doepfer A-199 Spring Reverb Module VE

Spring reverb module in Eurorack format

24 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

22 Anmeldelser

Smart Navigator

Artikel historik

Handl og betal sikkert

Dine fordele

Service

Serveret med kærlighed!

Doepfer A-199 Spring Reverb Module VE

Spring reverb module in Eurorack format

Tilbehør og matchende produkter

24 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

22 Anmeldelser

Sammenlign valgmuligheder

Smart Navigator