Doepfer A-160-5 VC Clock Multiplier
- Width: 4 TE / 4 HP / 20 mm
1 af 4 tekstbedømmelser.Læs alle anmeldelser
|I alt|| |
Another brilliant utility from Doepfer
The A-160-5 is only 4hp wide, so if your looking for a bit of clock fun in not much room it is a good option.
There are other multipliers out there - this by Doepfer is a bit different, as it offers 3 unique types of multiplication (all 3 going to a max of x 16), selectable by a simple toggle switch. In addition the the amount of multiplication can be set with the front panel knob or controlled by a voltage.
This means, you can either wiggle the knob to adjust the multiplications as desired, or more interestingly, send a sequencer, envelope or LFO voltage to get the multiplications dancing around. When the control voltage is inserted the knob has no function - so you may want to use an attenuator when cv-ing from a envelope or LFO.
I have deducted 1 star on the features because of this (the knob could have been made to perform this function when under cv control IMHO)
There are LED's for the input clock and multiplied clock output, so you get a visual representation of what's happening.
A point to note if you have not used a multiplier before... it can not predict the future! So, it needs a few established clocks before it can accurately spit out the multiplied clocks correctly. Obviously it also needs the clocks to be regular in order to perform accurate multiplication.
Great fun and as usual for Doepfer, great value and solid build quality.
Multiplier/Ratcheting Controller Width: 4 TE / 4 HP / 20 mm
Standard VCO for Modular System A-100Module A-110-1 (VCO) is a voltage controlled oscillator. The A-110-1 produces frequencies in a range of about 8 octaves, of which four waveforms are available...
Wasp Filter Special edition, Black front, Yellow knobs
Passive Multi-Port Distributor 8x Interconnected jacks, Sockets are divided into 2x quadruple groups; but can also be modified to an eight-multiple (soldering bridge on the circuit board), Width:...
ADSR Envelope Generator The module A-140 is a envelope generator and since it delivers control voltages, belongs to the modulation-modules. As soon as the ADSR is triggered at gate-input, it...
Mixer ModuleModule A-138 is a four-channel mixer that can be used for mixing control voltages as well as for mixing audio signals. A separate attenuator is available for each of the four inputs. In...
Quad ADSRThe module contains 4 independent ADSR envelope generators. Each sub-module has the controls Attack, Decay, Sustain and Release. With the 3-stage range switch, the desired time range can be...
Module Dual linear/exponential, VCA
Doepfer A-199 Spring Reverb Module - electronically simulated by means of 3 spiral springs. Spring reverb systems have a very characteristic sound that is based on the (insufficient) mechanical...
Doepfer A-180-3 Dual Buffered Multiples, dual buffered 1-in-3 multiple to copying/buffering of control and audio signals, Width: 4 TE / 4HP / 20.0 mm
Doepfer A-111-2; High End VCO II / VCLFO; Width: 14 HP, Current: +70mA (+12V) / -50mA (-12V)
Doepfer A-100 LC1 Low Cost Case for Eurorack Modules; build-in Power Supply A-100SSB (+12V/380 mA, -12V/380mA); 48 TE Version of the A-100LC3; build-in Bus Board with 8 Module connectors; Housing...
External Input / Envelope FollowerModule A-119 is used to integrate external audio signals into the system A-100, and includes the components pre-amplifiers, envelope follower and a comparator. The...
Noise/Random Voltage Generator Module A-118 is a noise and random voltage generator. It produces the following signals: white noise, coloured noise, and random voltage. White and coloured noise can...
Filter 12 dB Multi-mode filter, in which the circuit of the SEM module is used, Width: 8HP 40.3 mm, Depth: 55 mm (measured from the rear of the front panel), Power requirements: +30 MA (+ 12V) /...
Doepfer A-131 VCA - voltage controlled amplifier (logarithmic).
Doepfer A-157 Trigger Sequencer Subsystem 1-2-3, contains: A-157-1 Trigger Matrix (8x16) + A-157-2 Output Module and A-157-3 Input Module, generate up to eight trigger signals controlled by a 8x16...
Wasp Filter Module A-124 is a special 12 dB multimode filter using the "strange" filter circuit of the "EDP Wasp" (an analog synthesizer with black/yellow case built end of the seventies,...
Analog and Trigger Sequencer for Modular System A-100 The following functions are available for the two analog rows (rotary knobs): 8 Rotary potentiometers, Scale (stepless knob) on the lower...
Basic VCO for the A-100 modular system Voltage controlled oscillator, 3-Position toggle switch, Linear FM input and soft-sync input, Tune control range can be set between approx. 1/2 octave and 4...
Doepfer A-156 - Dual Quantizer.
portofrit fra 199 €
DKK priser er vejl. priser
|Fås siden||juli 2015|
|i denne kategori||Placering 125|
|på thomann.de||Placering 30215|
- Doepfer Modulære systemer vises her
- Vis Modulære systemer i priser fra 90 € - 110 €
- til produktgruppe Modulære systemer
- til produktgruppe Synthesizere
- til produktgruppe Tangentinstrumenter
- Her er informationer til producenten Doepfer
- Doepfer Tangentinstrumenter vises detaljeret
- Printversion af denne side
Flere produkter fra Doepfer
|Betaling og sikkerhed||Butik||Sitemap||Kontakt & Service||Til vores groupies...|
Sikker betaling med Kreditkort, Bankoverførsel eller PayPal.