• Seznam přání
  • cz
    Vyberte si obchod Select Store
    Všechny země All Countries
  • 0
Smazat všechny

Online průvodci Thomann: Amp modeling

9. Hotdeals

On this page you can find our current Hotdeals on amp modellers.

Kytarové předzesilovače

Line6 Helix LT Guitar Processor
Line6 Helix LT Guitar Processor
Guitar Processor
  • Next generation of Dual DSP-based HX Modeling Engine with 4 discrete stereo signal paths
  • 50 Guitar amplifiers
  • 12 Bass amplifiers
Line6 Helix LT Guitar Processor Guitar Processor Next generation of Dual DSP-based HX Modeling Engine with 4 discrete stereo signal paths 50 Guitar amplifiers 12 Bass amplifiers 37 Cabs 16 Microphones 104 Effects Imports IRs (impulse responses) up to 1024/2048 sample lengths 12 touch-sensitive foot switches Pedal Edit Mode for freehand editing Near-instant footswitch and controller assignment Up to 2 expression pedals Wide MIDI control Extensive inputs and outputs for the seamless integration of an entire rig 8 In / Out USB audio interface AES / EBU / L6 LINK (works as SPDIF with adapter) and VDI interfaces 123 dB Dynamic range at the guitar input for depth and low noise Robust construction Dimensions (W x D x H): 52.9 x 30.1 x 9.2 cm Weight: 5.44 kg
929 €
1 101 €
Line6 Helix Guitar Processor
Line6 Helix Guitar Processor
Guitar Processor
  • Next generation dual DSP based HX Modeling Engine with 4 discreet stereo-signal paths
  • 45 Amps, 30 speakers, 16 microphones and 70 effects
  • Imported IRs (impulse responses) with up to 1024 / 2048 samples
Line6 Helix Guitar Processor Guitar Processor Next generation dual DSP based HX Modeling Engine with 4 discreet stereo-signal paths 45 Amps, 30 speakers, 16 microphones and 70 effects Imported IRs (impulse responses) with up to 1024 / 2048 samples 12 Pressure sensitive foot switches for editing The Hands Free Pedal Edit mode sets the effects parameters onto the switch and expression pedal Near-Instant foot switch and controller assignment Up to 3 expression pedals CV/Expression output Amplifier switching output and extensive MIDI control Extensive inputs and outputs for the seamless integration of entire rigs 10 Inputs, 12 outputs (including four FX loops) 8 In / 8 Out USB audio interface AES / EBU, SPDIF and VDI interfaces 123 dB Dynamic range on the guitar input for enormous depth and low noise Robust construction Dimensions (W x D x H): 55.8 x 30 x 8.5 cm Weight: 6.6 kg
1 490 €
1 637 €
Boss GT-100
Boss GT-100
Electric Guitar Multi-effect
  • Floor board
  • 400 memory locations (200 User + 200 Preset)
  • 100 dB dynamic range
Boss GT-100, kytarový podlahový multiefekt, 400 pamětí (200 uživatelských + 200 presetů), dynamika 100 dB, efekty: kompresor, overdrive, distortion, preamp, EQ, delay, chorus, reverb, 2 LCD displeje, 1x jackový vstup, AUX-IN (stereo minijack), 2x jackové výstupy (L/R), sluchátkový vstup, FX-Loop, Ampcontrol (jack), USB, MIDI In/Out, 24Bit/44,1 kHz A/D převodník, rozměry (vxšxh): 80 x 542 x 271 mm, hmotnost: 4,8 kg, vč. síťového adaptéru
409 €
449 €
Avid Eleven Rack Hardware only
Avid Eleven Rack Hardware only
Avid Eleven Rack Hardware only, Avid Eleven Rack without ProTools, unique true-Z auto-impedance matching guitar input, incredible emulations of classic guitar amp tones inspired by Fender, Vox, Marshall, Soldano and Mesa/Boogie amps, refined collection of sought-after classic stompbox tones inspired by effects from MXR, Electro-Harmonix,...
498 €
Fishman Tone AFX DEQ
Fishman Tone AFX DEQ
Preamp for Acoustic Guitars
  • "Soft-Knee" compressor switch
  • 4-Band EQ with bass, mids, treble and high pass filter
  • 2x Reverb
Fishman Tone AFX DEQ Preamp for Acoustic Guitars "Soft-Knee" compressor switch 4-Band EQ with bass, mids, treble and high pass filter 2x Reverb 2x Delay 2x Chorus Flanger and Tremolo effects Foot switchable Boost function Switchable phase switch DI output Operates with 9V power supply (e.g. Article Nr #108096#) or via 9V battery (both are not included) Dimensions (W x H x D): 241 x 136 x 55 mm
298 €
498,61 €
IK Multimedia iRig 2
IK Multimedia iRig 2
Guitar Interface for iPhone, iPod touch, iPad, Mac
  • 6.3 mm Jack instrument input for guitar, bass or other instruments
  • 6.3 mm Jack output for connecting an external amplifier
  • 3.5 mm TRRS cable (fixed) for connection to iPhone, iPod touch, iPad, Mac
IK Multimedia iRig 2 Guitar Interface for iPhone, iPod touch, iPad, Mac 6.3 mm Jack instrument input for guitar, bass or other instruments 6.3 mm Jack output for connecting an external amplifier 3.5 mm TRRS cable (fixed) for connection to iPhone, iPod touch, iPad, Mac 3.5 mm Stereo headphone jack Selector switch for direct signal or FX signal Rotating wheel for input levels Measurements: 72 x 39 x 21 mm Weight: 43 g Incl. Mounting material for microphone stands or similar (Velcro tape) Incl. Software (manufacturer dependent, download required)@+*Compatibility:*@+@+ *Apple mobile devices:* All iPhones (from 3GS), iPads and iPod Touch (Generation 3 or newer) - iOS 4.3 or later *Mac computer:* Generally all models from "late 2008" - to be sure please check the system settings for compatibility (external microphone / iPhone headset must be listed): via this Mac> more information> System> Audio *Android:* (NOTE: only recommended as an impedance transformer, no real-time effects can be used): generally all smartphones and tablets conforming to the CTIA / AHJ Wiring Standard - Please refer to the specifications of the manufacturer (Tip: HP left, Ring: HP Right, Ring: Ground, Sleeve: Mic)
35 €
48,79 €
Line6 Pod HD500X
Line6 Pod HD500X
Floor Effects Switch
  • Over 100 studio and stomp effects
  • Up to 8 effects simultaneously
  • Free selectable loudspeaker and microphone modeling presets
Line6 Pod HD500X Floor Effects Switch Over 100 studio and stomp effects Up to 8 effects simultaneously Free selectable loudspeaker and microphone modeling presets 512 overwritable storages Dynamic DSP for amps and effects 2 Separate signals Numerous options of routing Professional footswitches with LED rings All necessary inputs and outputs: USB 2.0, MIDI, S/PDIF, symmetrical XLR outputs Internal microphone preamp L6 LINK connector for DT power amps and StageSource loudspeakers VDI connector for James Tyler Variax guitars Configurable expression pedal Looper function (up to 48 seconds of recording) 8 "set list" banks Expression pedal, controlling parameters of amplifying and effects Build in chromatic tuner Tap Tempo footswitch Robust metall chassis Protective chrome roll bar and pressure die cast expression pedal Variable input impedance Editor and librarian software available for download Incl. PX2 power supply
469 €
544 €
Laney IRT-Studio
Laney IRT-Studio
All-Tube Guitar Head
  • Power: 15 W
  • Complete Ironheart preamp: 3 channels, pre-boost, pull boost EQ controls, reverb
  • <1 W input Mode for high gain sounds at low volume
Laney IRT-Studio All-Tube Guitar Head Power: 15 W Complete Ironheart preamp: 3 channels, pre-boost, pull boost EQ controls, reverb <1 W input Mode for high gain sounds at low volume 2 Power amp tubes EL84 3 Preamp tubes ECC83 Speaker-emulated record output directly from the power amp - for full tube sound when recording and playing live Built-in dummy load: No speaker connection necessary USB audio port and re-amp jack output MP3 input: Mini jack Build type: 19" / 2 RU Dimensions (H x W x D): 88 x 428 x 285 mm Rack mount, foot switch and bag included
555 €
713 €
Kemper Profiling Amp PowerHead Set
Kemper Profiling Amp PowerHead Set
Kemper Profiling Amplifier Power Rack + Remote Control@+Kemper Profiling technology allows the creation of a very precise tonal image (profile) of an existing amplifier configuration (including speaker & miking). Thanks to the many internal editing options, such as: diverse effects unit emulations (up to 4 simultaneously), master effects, EQ, gain, amp definition, power sagging etc., you can edit the sound created far beyond the capabilities of the original amplifier. The Kemper Profiling Amplifier comes with an already large number of outstanding amplifier profiles, which is why the creation of individual ones is not mandatory. Thus it is now possible to map the sound of your own amplifier accurately, and if desired, to modify and have available to practice in the studio or on stage without a lot of lugging about.@+@+
  • Incl. 600 W class D power amplifier (600 W at 8 ohm, 300 W at 16 ohm)
  • Dimensions (W x H x D): 396 x 214 x 165 mm
  • Weight: 6 kg
Kemper Profiling Amp PowerHead Set Kemper Profiling Amplifier Power Rack + Remote Control@+Kemper Profiling technology allows the creation of a very precise tonal image (profile) of an existing amplifier configuration (including speaker & miking). Thanks to the many internal editing options, such as: diverse effects unit emulations (up to 4 simultaneously), master effects, EQ, gain, amp definition, power sagging etc., you can edit the sound created far beyond the capabilities of the original amplifier. The Kemper Profiling Amplifier comes with an already large number of outstanding amplifier profiles, which is why the creation of individual ones is not mandatory. Thus it is now possible to map the sound of your own amplifier accurately, and if desired, to modify and have available to practice in the studio or on stage without a lot of lugging about.@+@+ Incl. 600 W class D power amplifier (600 W at 8 ohm, 300 W at 16 ohm) Dimensions (W x H x D): 396 x 214 x 165 mm Weight: 6 kg Colour: Black Incl. remote control base board@+*Connectors:*@+@+ Mic Input Line In Alternative Input Direct Out Monitor Out Master Out (Jack & XLR) S/PDIF digital input and output MIDI In / Out / Thru 2x Foot switches (Jack) Network USB
2 549 €
Boss ME-80
Boss ME-80
Electric Guitar Multi Effects Unit
  • 9 current COSM amps derived from the GT-100
  • 8 categories of effects
  • Effects: phaser, tremolo, boost, delay, chorus, EQ, 3 different reverb modes, overdrive/ distortion, compressor, octaver, and more
Boss ME-80 Electric Guitar Multi Effects Unit 9 current COSM amps derived from the GT-100 8 categories of effects Effects: phaser, tremolo, boost, delay, chorus, EQ, 3 different reverb modes, overdrive/ distortion, compressor, octaver, and more 8 multifunctional switches Expression pedal Manual mode for turning on and off such as with separate foot switches Memory mode for switching between complete patch setups Delay section including Looper function with up to 38 seconds of recording 2 amp jack outputs (6.3 mm) Recording and headphones mini jack output (3.5mm) Auxiliary in USB connector Operates with 6 AA batteries or with optional power supply (Article Nr #102842# not included) Dimensions: 447 x 231 x 91 mm Weight: 3.6 kg
299 €
329 €

Tranzistorové hlavy

Kemper Profiling Amp PowerHead Set
Kemper Profiling Amp PowerHead Set
Kemper Profiling Amplifier Power Rack + Remote Control@+Kemper Profiling technology allows the creation of a very precise tonal image (profile) of an existing amplifier configuration (including speaker & miking). Thanks to the many internal editing options, such as: diverse effects unit emulations (up to 4 simultaneously), master effects, EQ, gain, amp definition, power sagging etc., you can edit the sound created far beyond the capabilities of the original amplifier. The Kemper Profiling Amplifier comes with an already large number of outstanding amplifier profiles, which is why the creation of individual ones is not mandatory. Thus it is now possible to map the sound of your own amplifier accurately, and if desired, to modify and have available to practice in the studio or on stage without a lot of lugging about.@+@+
  • Incl. 600 W class D power amplifier (600 W at 8 ohm, 300 W at 16 ohm)
  • Dimensions (W x H x D): 396 x 214 x 165 mm
  • Weight: 6 kg
Kemper Profiling Amp PowerHead Set Kemper Profiling Amplifier Power Rack + Remote Control@+Kemper Profiling technology allows the creation of a very precise tonal image (profile) of an existing amplifier configuration (including speaker & miking). Thanks to the many internal editing options, such as: diverse effects unit emulations (up to 4 simultaneously), master effects, EQ, gain, amp definition, power sagging etc., you can edit the sound created far beyond the capabilities of the original amplifier. The Kemper Profiling Amplifier comes with an already large number of outstanding amplifier profiles, which is why the creation of individual ones is not mandatory. Thus it is now possible to map the sound of your own amplifier accurately, and if desired, to modify and have available to practice in the studio or on stage without a lot of lugging about.@+@+ Incl. 600 W class D power amplifier (600 W at 8 ohm, 300 W at 16 ohm) Dimensions (W x H x D): 396 x 214 x 165 mm Weight: 6 kg Colour: Black Incl. remote control base board@+*Connectors:*@+@+ Mic Input Line In Alternative Input Direct Out Monitor Out Master Out (Jack & XLR) S/PDIF digital input and output MIDI In / Out / Thru 2x Foot switches (Jack) Network USB
2 549 €
Fishman Platinum Pro EQ
Fishman Platinum Pro EQ
Analogue Preamp for Acoustic Guitar & Bass
  • Class A preamp
  • Tone Shaping: 5-band EQ with sweepable mids
  • Adjustable low cut filter
Fishman Platinum Pro EQ Analogue Preamp for Acoustic Guitar & Bass Class A preamp Tone Shaping: 5-band EQ with sweepable mids Adjustable low cut filter Feedback Control: semi-parametric notch filter and phase invert switch 12 dB Boost symmetric XLR DI output with pre/ post EQ switch Built In Tuner Power supply: 9 V battery or power adaptor (Article Nr #108096# - not included) Dimensions: 158 x 143 x 54 mm
269 €
451,01 €
Tech 21 Character VT Bass Deluxe
Tech 21 Character VT Bass Deluxe
Bass Preamp
  • Character series
  • 2 Instrument inputs
  • 3 Memories for each input or total 6 presets when using an input
Tech 21 Character VT Bass Deluxe Bass Preamp Character series 2 Instrument inputs 3 Memories for each input or total 6 presets when using an input Programmable effects loop Sounds from clean to overdrive to distortion TRS & XLR output Power supply via optional 9V battery (#132579#) or optional power supply (#) or phantom power
309 €
451,01 €
Gallien Krueger Plex Preamp
Gallien Krueger Plex Preamp
Preamp
  • Active 4-band EQ with contour control of the classic 800RB
  • Selectable voicing filter
  • Built-in chromatic tuner
Gallien Krueger Plex Preamp Preamp Active 4-band EQ with contour control of the classic 800RB Selectable voicing filter Built-in chromatic tuner Boost function Compressor with variable level / ratio / threshold / attack / release Headphone output AUX input XLR DI output with ground lift and pre / post switch Effects loop USB in / out for recording and re-amping 24-Bit Incl. 9V power supply Dimensions (W x H x D): 13.55 x 14.3 x 3.65 cm Weight: 0.68 kg
298 €
Ampeg SCR DI
Ampeg SCR DI
DI-Box with overdrive for bass
  • The footswitchable Ampeg preamp offers a wide selection of authentic Ampeg sounds, from smooth Portaflex up to harmonically-rich SVT
  • Real distorted SVT tone
  • Controls (Scrambler): Drive and Blend
Ampeg SCR DI DI-Box with overdrive for bass The footswitchable Ampeg preamp offers a wide selection of authentic Ampeg sounds, from smooth Portaflex up to harmonically-rich SVT Real distorted SVT tone Controls (Scrambler): Drive and Blend Controls (pre-amp): Volume, Bass, Mid, Treble and AUX Level Ultra Lo and Ultra Hi switch AUX input (6.3 mm & 2.5 mm jack) Balanced XLR line output with ground lift Output jack Thru jack output (unprocessed) Headphone output Power supply: 9V battery or 9 - 12V DC power supply (not included) Current consumption: 100 mA Dimensions (W x H x D): 193 x 56 x 110 mm Weight approx. 1.2 kg
249 €
296,31 €
Kemper Profiling Amplifier PowerHead
Kemper Profiling Amplifier PowerHead
AmplifierSince the introduction of modeling technology into the guitar amplifier world, guitarists have been able to access a variety of sounds and effects with relatively little effort. @+@+But what if you want to take your own favourite sounds instead of the manufacturer's sound specifications? Prior to the release of the Kemper Profiling Amp, there were not many alternatives: either, as before the digital revolution, they dragged their entire equipment from place to place, or tried to adapt the modeled sounds of the modeling amp as far as possible to their own desires. @+@+Kemper breaks new ground here. Instead of using predefined emulation of different amplifier models, the Profiling Amp (Nomen est Omen) creates an exact image of the sound set on the amplifier together with the connected speaker and microphone. This combines all the personal favourite sounds in one device. In addition, the sound profile can be edited with various floor effect emulations, master effects, equalizer, and so on. A separate amp fleet is not a mandatory requirement, because the Profiling Amplifier is already equipped with a large number of classic amplifier profiles. In addition, a large Kemper community has now established itself in the world where sound profiles are exchanged over the Internet. @+@+
  • Powerhead version with 600 watt class D amplifier
  • 600 watts into 8 ohms, 300 watts into 16 ohm
  • Dimensions (W x H x D): 37.8 x 21.7 x 17.3 cm
Kemper Profiling Amplifier PowerHead AmplifierSince the introduction of modeling technology into the guitar amplifier world, guitarists have been able to access a variety of sounds and effects with relatively little effort. @+@+But what if you want to take your own favourite sounds instead of the manufacturer's sound specifications? Prior to the release of the Kemper Profiling Amp, there were not many alternatives: either, as before the digital revolution, they dragged their entire equipment from place to place, or tried to adapt the modeled sounds of the modeling amp as far as possible to their own desires. @+@+Kemper breaks new ground here. Instead of using predefined emulation of different amplifier models, the Profiling Amp (Nomen est Omen) creates an exact image of the sound set on the amplifier together with the connected speaker and microphone. This combines all the personal favourite sounds in one device. In addition, the sound profile can be edited with various floor effect emulations, master effects, equalizer, and so on. A separate amp fleet is not a mandatory requirement, because the Profiling Amplifier is already equipped with a large number of classic amplifier profiles. In addition, a large Kemper community has now established itself in the world where sound profiles are exchanged over the Internet. @+@+ Powerhead version with 600 watt class D amplifier 600 watts into 8 ohms, 300 watts into 16 ohm Dimensions (W x H x D): 37.8 x 21.7 x 17.3 cm Weight: 6.5 kg Colour: Black@+*Connections:*@+@+ Mic input Line In Alternative input Direct out Monitor out Master out (Jack & XLR) S / PDIF digital input and output Midi In / Out / Thru 2 x footswitch (jack) Network & USB
2 099 €
Kemper Profiling Amplifier Head BK
Kemper Profiling Amplifier Head BK
AmplifierSince the introduction of modeling technology into the guitar amplifier world, guitarists have been able to access a variety of sounds and effects with relatively little effort.@+@+But what if you want to take your own favourite sounds instead of the manufacturer's sound specifications? Prior to the release of the Kemper Profiling Amp, there were not many alternatives: either, as before the digital revolution, they dragged their entire equipment from place to place, or tried to adapt the modeled sounds of the modeling amp as far as possible to their own desires.@+@+Kemper breaks new ground here. Instead of using predefined emulation of different amplifier models, the Profiling Amp (Nomen est Omen) creates an exact image of the sound set on the amplifier together with the connected speaker and microphone. This combines all the personal favourite sounds in one device. In addition, the sound profile can be edited with various floor effect emulations, master effects, equalizer, and so on. A separate amp fleet is not a mandatory requirement, because the Profiling Amplifier is already equipped with a large number of classic amplifier profiles. In addition, a large Kemper community has now established itself in the world where sound profiles are exchanged over the Internet.@+@+
  • Dimensions (W x H x D): 37.8 x 21.7 x 17.3 cm
  • Weight: 5.32 kg
  • Colour: Black
Kemper Profiling Amplifier Head BK AmplifierSince the introduction of modeling technology into the guitar amplifier world, guitarists have been able to access a variety of sounds and effects with relatively little effort.@+@+But what if you want to take your own favourite sounds instead of the manufacturer's sound specifications? Prior to the release of the Kemper Profiling Amp, there were not many alternatives: either, as before the digital revolution, they dragged their entire equipment from place to place, or tried to adapt the modeled sounds of the modeling amp as far as possible to their own desires.@+@+Kemper breaks new ground here. Instead of using predefined emulation of different amplifier models, the Profiling Amp (Nomen est Omen) creates an exact image of the sound set on the amplifier together with the connected speaker and microphone. This combines all the personal favourite sounds in one device. In addition, the sound profile can be edited with various floor effect emulations, master effects, equalizer, and so on. A separate amp fleet is not a mandatory requirement, because the Profiling Amplifier is already equipped with a large number of classic amplifier profiles. In addition, a large Kemper community has now established itself in the world where sound profiles are exchanged over the Internet.@+@+ Dimensions (W x H x D): 37.8 x 21.7 x 17.3 cm Weight: 5.32 kg Colour: Black@+Connections:@+@+ Microphone input Line input Alternative input DI output Monitor output Master output (jack and XLR) S / PDIF digital input and output MIDI In / Out / Thru 2 Inputs for footswitch (jack) Ethernet port 2 USB ports
1 695 €
Kemper Profiling Amp Head BK Set
Kemper Profiling Amp Head BK Set
Kemper Profiling Amplifier Head BK + Remote Control@+The Kemper Profiling Technology allows you to create precise sound snapshot of an existing amplifier setup including speaker cabinet & microphone(s). This snapshot can then be modified even far beyond the amps original possibilities by the internal processors such as multiple stomp effect emulations (up to 4 simultaneously), master effects, equalizer, gain, amp definition, power sagging etc. The Kemper Profiling Amplifier is already delivered with several painstaking amp profiles on board so you don't necessarily have to make your own profiles. For the first time it is now possible to take a precise snapshot of your own amplifier sound, modify it (if desired) and use it for practice in the studio or on stage without carrying heavy equipment.@+@+
  • Dimensions (W x H x D): 396 x 214 x 165 mm
  • Weight: 5.4 kg
  • Colour: Black
Kemper Profiling Amp Head BK Set Kemper Profiling Amplifier Head BK + Remote Control@+The Kemper Profiling Technology allows you to create precise sound snapshot of an existing amplifier setup including speaker cabinet & microphone(s). This snapshot can then be modified even far beyond the amps original possibilities by the internal processors such as multiple stomp effect emulations (up to 4 simultaneously), master effects, equalizer, gain, amp definition, power sagging etc. The Kemper Profiling Amplifier is already delivered with several painstaking amp profiles on board so you don't necessarily have to make your own profiles. For the first time it is now possible to take a precise snapshot of your own amplifier sound, modify it (if desired) and use it for practice in the studio or on stage without carrying heavy equipment.@+@+ Dimensions (W x H x D): 396 x 214 x 165 mm Weight: 5.4 kg Colour: Black Incl. Remote Control base board@+*Connections:*@+@+ Mic input Line in Alternative input Direct Out Monitor Out Master Out (jack and XLR) S / PDIF digital input and output MIDI In/Out/Thru 2 x Foot switches (jack) Network USB
2 144 €
Kemper Profiling Amplifier PowerRack
Kemper Profiling Amplifier PowerRack
Amplifier 19" VersionSince the introduction of modeling technology into the guitar amplifier world, guitarists have been able to access a variety of sounds and effects with relatively little effort.@+@+But what if you want to take your own favorite sounds instead of the manufacturer's sound specifications? Prior to the release of the Kemper Profiling Amp, there were not many alternatives: either, as before the digital revolution, they dragged their entire equipment from place to place, or tried to adapt the modeled sounds of the modeling amp as far as possible to their own desires.@+@+ Kemper breaks new ground here. Instead of using predefined emulation of different amplifier models, the Profiling Amp (Nomen est Omen) creates an exact image of the sound set on the amplifier together with the connected speaker and microphone. This combines all the personal favorite sounds in one device. In addition, the sound profile can be edited with various floor effect emulations, master effects, equalizer, and so on. A separate amp fleet is not a mandatory requirement, because the Profiling Amplifier is already equipped with a large number of classic amplifier profiles. In addition, a large Kemper community has now established itself in the world where sound profiles are exchanged over the Internet.@+@+
  • Power rack version with 600 watt class D amplifier
  • Power: 600 watts into 8 ohms, 300 watts into 16 ohm
  • Format: 19 "/ 3 HE
Kemper Profiling Amplifier PowerRack Amplifier 19" VersionSince the introduction of modeling technology into the guitar amplifier world, guitarists have been able to access a variety of sounds and effects with relatively little effort.@+@+But what if you want to take your own favorite sounds instead of the manufacturer's sound specifications? Prior to the release of the Kemper Profiling Amp, there were not many alternatives: either, as before the digital revolution, they dragged their entire equipment from place to place, or tried to adapt the modeled sounds of the modeling amp as far as possible to their own desires.@+@+ Kemper breaks new ground here. Instead of using predefined emulation of different amplifier models, the Profiling Amp (Nomen est Omen) creates an exact image of the sound set on the amplifier together with the connected speaker and microphone. This combines all the personal favorite sounds in one device. In addition, the sound profile can be edited with various floor effect emulations, master effects, equalizer, and so on. A separate amp fleet is not a mandatory requirement, because the Profiling Amplifier is already equipped with a large number of classic amplifier profiles. In addition, a large Kemper community has now established itself in the world where sound profiles are exchanged over the Internet.@+@+ Power rack version with 600 watt class D amplifier Power: 600 watts into 8 ohms, 300 watts into 16 ohm Format: 19 "/ 3 HE Dimensions (W x H x D): 48.3 x 13.9 x 22 cm Weight: 6.18 kg Color: Black Mic input Line In Alternative input Direct Out Monitor Out Master Out (jack S / PDIF digital input and output Midi In / Out / Thru 2 x footswitch (jack) Network
2 099 €
EBS Micro Bass II
EBS Micro Bass II
Bass Preamp/DI Box@+The Swedish company EBS has existed since 1988. It caters primarily to the needs of bass players, and since the staff is rumoured to consist of bass players themselves, it is not surprising that products are developed to leave the hearts of bassists excited. Especially with regard to effects devices, bass players were most often neglected. A major problem has always been the fact that most effects deteriorate the frequencies precisely in the range that is crucial for proper bass guitar sound, namely in the low frequencies. So it is of little surprise, that the EBS-effects are really unproblematic in that area and otherwise have a lot of really interesting features to offer as well. Already in 1993, EBS presented their first preamp, the EBS Micro Bass.@+@+@+The Micro Bass II is incredibly versatile for example as an active DI box, as one or two channel preamp, instrument switcher or mixer. With its two channels the Micro Bass II covers all sound variations. It is equipped with the award winning tube simulation circuitry that was previously reserved for the more expensive EBS Bass Heads. A variable effect Loop provides the musician with additional flexibility for the connection of another pedal or for mixing an external audio source for example a CD player for practice purposes. The balanced studio output with speakersimulaton provides versatile flexibility. Live or in the studio. With the two footswitches to switch A/B channels and the mute switch to mute one of them.@+@+@+Other important features of the little goblin are headphone output, battery status indicator, link and master outputs, bass, tuneable mid, treble, bright and edge filter, drive and effects mix control.@+@+
  • Controller/functions: Volume Drive Edge EQ Gain & FxMix
  • Adjustable effects loop
  • Balanced studio output with speakersimulaton
EBS Micro Bass II Bass Preamp/DI Box@+The Swedish company EBS has existed since 1988. It caters primarily to the needs of bass players, and since the staff is rumoured to consist of bass players themselves, it is not surprising that products are developed to leave the hearts of bassists excited. Especially with regard to effects devices, bass players were most often neglected. A major problem has always been the fact that most effects deteriorate the frequencies precisely in the range that is crucial for proper bass guitar sound, namely in the low frequencies. So it is of little surprise, that the EBS-effects are really unproblematic in that area and otherwise have a lot of really interesting features to offer as well. Already in 1993, EBS presented their first preamp, the EBS Micro Bass.@+@+@+The Micro Bass II is incredibly versatile for example as an active DI box, as one or two channel preamp, instrument switcher or mixer. With its two channels the Micro Bass II covers all sound variations. It is equipped with the award winning tube simulation circuitry that was previously reserved for the more expensive EBS Bass Heads. A variable effect Loop provides the musician with additional flexibility for the connection of another pedal or for mixing an external audio source for example a CD player for practice purposes. The balanced studio output with speakersimulaton provides versatile flexibility. Live or in the studio. With the two footswitches to switch A/B channels and the mute switch to mute one of them.@+@+@+Other important features of the little goblin are headphone output, battery status indicator, link and master outputs, bass, tuneable mid, treble, bright and edge filter, drive and effects mix control.@+@+ Controller/functions: Volume Drive Edge EQ Gain & FxMix Adjustable effects loop Balanced studio output with speakersimulaton Two foot switches Colour: black Power supply with 9V battery (Article Nr #132579#) or AC adapter (#108096#) both optionally available@+Colour: Black@+@+
329 €

Tranzistorová komba

Fender Mustang I V.2
Fender Mustang I V.2
Electric Guitar Combo
  • 20 W
  • 1 x 8" Special Fender Design speaker
  • 8 Ohm
Fender Mustang I V.2 Electric Guitar Combo 20 W 1 x 8" Special Fender Design speaker 8 Ohm 1 Channel with 24 presets Controls for Gain - Volume - Treble - Bass - Master - Preset Select - Modulation Speed - Delay/Reverb Select - Save button - Exit button - Tap Tempo button@+*12 Modulation Effects:*@+@+ Chorus Flanger Tremolo Vibratone Octaver Phaser Step filter@+*12 Delay/Reverb Effects:*@+@+ Tape Delay Big Fuzz, Green Screamer and Intelligent Pitch Shifting Stereo/Mono Delay Room/Plate/Hall Reverb USB Built-in tuner AUX input Headphone output (simultaneously speaker emulated line out) Speaker emulated USB output Dimensions (H x W x D): 36.83 x 40 x 19.3 cm Weight: 7.7 kg Incl. Download licenses (internet access required) for Ableton® Live Lite 8 Fender® Edition studio-quality recording software compatible with Mustang USB recording output AmpliTube® Fender® LE edition with free Fender® FUSE editor/librarian software for Mac and PC Optional foot switch available under Article Nr #253297#
125 €
Fender Mustang GT 100
Fender Mustang GT 100
Digital Combo Amplifier For Electric Guitar
  • Power: 100 W
  • Speakers: 1 Custom Celestion 12" speaker
  • 21 Amp models
Fender Mustang GT 100 Digital Combo Amplifier For Electric Guitar Power: 100 W Speakers: 1 Custom Celestion 12" speaker 21 Amp models 47 Effects Controls for Gain, Volume, Treble, Middle, Bass, Reverb, Master Encoder Three layer buttons FX button Save button Menu button Tap button USB recording output 3.5 mm AUX input 3.5 mm headphone output Stereo XLR line output Stereo effect loop Digital chromatic tuner Bluetooth audio streaming Easy WIFI firmware and feature updates Dimensions (H x W x D): 44.5 x 52.1 x 25.4 cm Weight: 9.97 kg Matching accessories: 4-Button MGT-4 foot switch for Preset FX switch and Looper (not included)
389 €
Fender Mustang GT 40
Fender Mustang GT 40
Combo Amplifier For Electric Guitar
  • Power: 40 W (2x 20 W)
  • Speakers: 2x 6.5" speakers
  • 21 Amp models
Fender Mustang GT 40 Combo Amplifier For Electric Guitar Power: 40 W (2x 20 W) Speakers: 2x 6.5" speakers 21 Amp models 47 Effects Controls for Gain, Volume, Treble, Bass, Master Encoder Three layer buttons FX button Save button Menu button Tap button USB recording output 3.5 mm AUX input 3.5 mm headphone output Digital chromatic tuner Bluetooth audio streaming Easy WIFI firmware and feature updates Dimensions (H x W x D): 27.9 x 31 x 45.72 cm Weight: 7.7 kg Matching accessories: 4-Button MGT-4 foot switch for Preset FX switch and Looper (not included)
238 €
Line6 Spider Classic
Line6 Spider Classic
Electric Guitar Combo Amp
  • Power: 15 W
  • Equipped with: 1x 8" speaker
  • 4 Amp models
Line6 Spider Classic Electric Guitar Combo Amp Power: 15 W Equipped with: 1x 8" speaker 4 Amp models 4 Programmable presets FX processor (6x different effects - 2x simultaneously) Frequency corrected headphone output (also usable as DI-out) CD/MP3 input (3.5 mm jack) Built-in tuner Compatible with FBV pedal boards Dimensions (D x W x H): approx. 20.3 x 38.7 x 36.2 cm
99 €
115,43 €
Line6 Spider V 240
Line6 Spider V 240
Modelling Combo
  • Power: 240 W
  • Equipped with: 2x 12" Custom full/range loudspeaker & tweeter
  • 200 Amp models
Line6 Spider V 240 Modelling Combo Power: 240 W Equipped with: 2x 12" Custom full/range loudspeaker & tweeter 200 Amp models 128 Presets (incl. Signature Setups & Sounds) Controls: Drive, Bass, Mid, Treble & Volume 1x 6.3 mm jack instrument input 1x Headphone input 1x Stereo aux input Built-in tuner Drum Loops Metronome USB recording & playback XLR DI output Compatible with Line6 FBV3 (Article #380135#) & FBV MKII footswitches (Article #231417# & Article #231418# - both not included) Built-in Line6 Relay G10 receiver (matching Line6 Relay G10 transmitter Article #398255# (not included) - can be charged via instrument input on amplifier Dimensions: 271 x 683 x 551 mm Weight: 19.5 kg
499 €
581,91 €
Line6 Spider V 120
Line6 Spider V 120
Modelling Combo
  • Power: 120W
  • Equipped with: 1x 12" Custom full/range loudspeaker & tweeter
  • 200 Amp models
Line6 Spider V 120 Modelling Combo Power: 120W Equipped with: 1x 12" Custom full/range loudspeaker & tweeter 200 Amp models 128 Presets (incl. Signature Setups & Sounds) Controls: Drive, Bass, Mid, Treble & Volume 1x 6.3 mm jack instrument input 1x Headphone input 1x Stereo aux input Built-In tuner Drum Loops Metronome USB recording & playback XLR DI output Compatible with Line6 FBV3 (Article #380135#) & FBV MKII footswitches (Article #231417# & Article #231418# - both not included) Built-in Line6 Relay G10 receiver (matching Line6 Relay G10 transmitter: Article #398255# (not included) - can be charged via instrument input on amplifier Dimensions: 271 x 510 x 490 mm Weight: 14 kg
399 €
465,29 €
Vox VT20X
Vox VT20X
Modelling Combo for Electric Guitar
  • Power: 20 W @ 5 Ohm
  • Equipped with: 1x 8" Speaker
  • Valvetronix tube preamp
Vox VT20X Modelling Combo for Electric Guitar Power: 20 W @ 5 Ohm Equipped with: 1x 8" Speaker Valvetronix tube preamp 11 Amp models (20 when using Tone Room - editor/librarian software): Deluxe CL, Tweed 4x10, Vox AC30, Boutique OD, VOX AC30TB, Brit 800, Brit OR MKII, Double Rec, Boutique CL, Brit 1959, Boutique Metal Effects: Pedal 1-type: 4 (Comp, Chorus, Overdrive, Distortion) Pedal 2-type: 4 (Flanger, Phaser, Tremolo, Delay) Reverb type: 4 (Room, Spring, Hall, Plate) Memory slots: 33 (60 when using Tone Room - editor/librarian software) User programs: 8 (2 banks x 4 channels) 6.3 mm Jack input AUX in Headphone input Foot pedal connector Mini USB port (type B) Dimensions: 410 x 225 x 347 mm Weight: 7.3 kg Power adapter included Compatible foot switch: Vox VFS5 (Article Nr #217599#) - not included
198 €
Roland Micro Cube GX RD
Roland Micro Cube GX RD
Battery Guitar Combo Amp
  • 5" Speaker
  • 3 Watt
  • 8 Amp models
Roland Micro Cube GX RD, kytarový zesilovač na baterie, 5" reproduktor, 3W, 8 modelů zesilovačů, 8 efektů, funkce Memory, i-Cube LINK (rozhraní pro spojení s iPhonem, iPadem a iPodem – kabel součástí balení), vestavěná ladička, možnost napájení na baterie nebo síťovým adaptérem (adaptér součástí balení), vč. popruhu na nošení, barva: červená
115 €
149 €
Line6 Spider V 30
Line6 Spider V 30
Modelling Combo
  • Power: 30 W
  • Equipped with: 1x 8" Custom full/range loudspeaker & tweeter
  • 200+ Amp models
Line6 Spider V 30 Modelling Combo Power: 30 W Equipped with: 1x 8" Custom full/range loudspeaker & tweeter 200+ Amp models 128 Presets (incl. Signature Setups & Sounds) Controls: Drive, Bass, Mid, Treble & Volume 1x 6.3 mm jack instrument input 1x Headphone input 1x Stereo aux input Built-in tuner Drum Loops Metronome USB recording & playback Compatible with Line6 FBV3 (Article #380135#) & FBV MKII footswitches (Article #231417# & Article #231418# - both not included) Dimensions: 208 x 391 x 381 mm Weight: 7.3 kg
198 €
217,77 €
Roland Cube Street EX
Roland Cube Street EX
Battery Powered Guitar Combo
  • 4 Channels
  • Power: switchable 50/25/10 Watt
  • Equipped with: 2x 8" speakers and 2x 2" tweeter
Roland Cube Street EX Battery Powered Guitar Combo 4 Channels Power: switchable 50/25/10 Watt Equipped with: 2x 8" speakers and 2x 2" tweeter Stereo operation 2 XLR combo jacks Integrated effects: Chorus, Delay and adjustable Reverb 3-Band EQ Amp modelling (COSM) I-CUBE LINK capable Stereo Line-In AUX in Shot over CUBE JAM app (available as a free download) Power supply via supplied PSU (PSB-12U) or 8 AA batteries (up to 20 hours run time in ECO mode) Switchable stereo link to link 2 Cube Street EX together 2 Mono line outputs Headphone output 2 Foot switches for effect circuit Weight: approx. 7.4 kg Colour: Black Incl. 4-pin mini jack cable@+*Note: Batteries are not included*@+@+
539 €
629 €

Tranzistorové hlavy

Blackstar ID:Core 40H Stereo Head
Blackstar ID:Core 40H Stereo Head
Stereo Head For Electric guitar
  • Power: 40W stereo - 2x 20W at 8 ohms per side
  • 6 Voices: Clean Warm, Clean Bright, Crunch, Super Crunch, OD1 & OD2
  • 12 Digital effects
Blackstar ID:Core 40H Stereo Head Stereo Head For Electric guitar Power: 40W stereo - 2x 20W at 8 ohms per side 6 Voices: Clean Warm, Clean Bright, Crunch, Super Crunch, OD1 & OD2 12 Digital effects ISF circuit USB connection Line In Line output with speaker emulation Stereo speakers outputs Headphone output Foot switch connection - suitable foot switch Blackstar FS-11 (available under Art. #341906# - not included) Measurements: 320 x 160 x 185 mm Weight: 2.5 kg Incl. Power supply
89 €
213,01 €
Line6 Spider V 240 Head
Line6 Spider V 240 Head
Amp Head for Electric Guitar
  • Power: 240 W
  • 2 Built-in 4" speakers and 2 tweeters for stand-alone use (50 W)
  • Over 200 amps, effects and boxes
Line6 Spider V 240 Head Amp Head for Electric Guitar Power: 240 W 2 Built-in 4" speakers and 2 tweeters for stand-alone use (50 W) Over 200 amps, effects and boxes 128 Presets Wireless-ready for Line 6 relay transmitters XLR direct outs Built-in 60 seconds looper USB Interface and recording software Drum loops, metronome and tuner
479 €
545,02 €
Kemper Profiling Amp Head BK Set
Kemper Profiling Amp Head BK Set
Kemper Profiling Amplifier Head BK + Remote Control@+The Kemper Profiling Technology allows you to create precise sound snapshot of an existing amplifier setup including speaker cabinet & microphone(s). This snapshot can then be modified even far beyond the amps original possibilities by the internal processors such as multiple stomp effect emulations (up to 4 simultaneously), master effects, equalizer, gain, amp definition, power sagging etc. The Kemper Profiling Amplifier is already delivered with several painstaking amp profiles on board so you don't necessarily have to make your own profiles. For the first time it is now possible to take a precise snapshot of your own amplifier sound, modify it (if desired) and use it for practice in the studio or on stage without carrying heavy equipment.@+@+
  • Dimensions (W x H x D): 396 x 214 x 165 mm
  • Weight: 5.4 kg
  • Colour: Black
Kemper Profiling Amp Head BK Set Kemper Profiling Amplifier Head BK + Remote Control@+The Kemper Profiling Technology allows you to create precise sound snapshot of an existing amplifier setup including speaker cabinet & microphone(s). This snapshot can then be modified even far beyond the amps original possibilities by the internal processors such as multiple stomp effect emulations (up to 4 simultaneously), master effects, equalizer, gain, amp definition, power sagging etc. The Kemper Profiling Amplifier is already delivered with several painstaking amp profiles on board so you don't necessarily have to make your own profiles. For the first time it is now possible to take a precise snapshot of your own amplifier sound, modify it (if desired) and use it for practice in the studio or on stage without carrying heavy equipment.@+@+ Dimensions (W x H x D): 396 x 214 x 165 mm Weight: 5.4 kg Colour: Black Incl. Remote Control base board@+*Connections:*@+@+ Mic input Line in Alternative input Direct Out Monitor Out Master Out (jack and XLR) S / PDIF digital input and output MIDI In/Out/Thru 2 x Foot switches (jack) Network USB
2 144 €
DV Mark Multiamp
DV Mark Multiamp
Head amp for electric guitar
  • Combination of preamp effects processor and power amp
  • Power amp: 2x 150 W @ 8 Ohm or 2 x 250 W @ 4 Ohm or 500 W @ 8 Ohm (bridged)
  • 3 channels: Clean, Crunch, Lead
DV Mark Multiamp 2.1 Head amp for electric guitar Combination of preamp effects processor and power amp Power amp: 2x 150 W @ 8 Ohm or 2 x 250 W @ 4 Ohm or 500 W @ 8 Ohm (bridged) 3 channels: Clean, Crunch, Lead Controls for Gain, Presence, Level, and Master EQ with controls for bass, mids and treble MIDI In / Out Virtual simulation for amp speakers and microphones Multi-effects processor SD card slot Mono input: 6.3 mm jack 2 mono outputs: XLR / 6.3 mm jack Format: 19" / 2U Weight: 4,3 kg Incl. adapter for rack mounting and a transport bag
1 299 €
1 499 €
Kemper Profiling Amplifier Head WH
Kemper Profiling Amplifier Head WH
AmplifierSince the advent of modelling technology in guitar amplifiers, guitarists all over the world can access a variety of sounds and effects relatively easily. @+@+But what if you want to place the factory sound with your own favourite personal sounds? Before the appearance of the Kemper Profiling Amps there were basically not many alternatives: you could either drag (before the digital revolution) all of your equipment from place to place, or you could do your best to adapt the factory sounds of the modelling amp as much as possible to your own desires. @+@+Kemper forges a new path here. Instead of the predefined emulation of different amp models generally in use, the Profiling Amp creates (hence the name) an exact image of the amp sounds together with the connected box and microphone. Thus combining all personal favourite sounds in one unit. In addition, the sound profile can be modified with various ground-effect emulations, Master effects, Equalizer, etc. A separate amp armada is not a mandatory requirement, because the Profiling Amplifier is already delivered with a large number of classic amplifiers profiles. In addition, a large Kemper community is now well established, exchanging sound profiles on the Internet from all over the world. @+@+
  • Dimensions (W x H x D): 37.8 x 21.7 x 17.3 cm
  • Weight: 5.32 kg
  • Colour white
Kemper Profiling Amplifier Head WH AmplifierSince the advent of modelling technology in guitar amplifiers, guitarists all over the world can access a variety of sounds and effects relatively easily. @+@+But what if you want to place the factory sound with your own favourite personal sounds? Before the appearance of the Kemper Profiling Amps there were basically not many alternatives: you could either drag (before the digital revolution) all of your equipment from place to place, or you could do your best to adapt the factory sounds of the modelling amp as much as possible to your own desires. @+@+Kemper forges a new path here. Instead of the predefined emulation of different amp models generally in use, the Profiling Amp creates (hence the name) an exact image of the amp sounds together with the connected box and microphone. Thus combining all personal favourite sounds in one unit. In addition, the sound profile can be modified with various ground-effect emulations, Master effects, Equalizer, etc. A separate amp armada is not a mandatory requirement, because the Profiling Amplifier is already delivered with a large number of classic amplifiers profiles. In addition, a large Kemper community is now well established, exchanging sound profiles on the Internet from all over the world. @+@+ Dimensions (W x H x D): 37.8 x 21.7 x 17.3 cm Weight: 5.32 kg Colour white Mic input Line In Alternative input Direct Out Monitor Out Master Out (jack S / PDIF digital input and output Midi In / Out / Thru 2x foot switch (TRS) Network
1 695 €
Kemper Profiling Amp Head WH Set
Kemper Profiling Amp Head WH Set
Kemper Profiling Amp Head Bk + Remote ControlThe Kemper profiling technology allows the creation of a very precise sound image (profile) of an existing amplifier configuration (including speaker and microphone position). Thanks to the many internal processing possibilities, such as various stomp emulations (up to 4 simultaneous), master effects, equalizer, gain, amp definition, power sagging, etc., one can process the sound far beyond the possibilities of the original amplifier. However the Kemper Profiling Amp is also supplied with a large number of outstanding amplifier profiles, making the creation of custom profiles not absolutely necessary. Thus for the first time it is possible to accurately reproduce the sound of the amplifier of your choice, to modify it if you wish, and have it available for practicing, in the studio or on stage without the need for great effort.@+@+
  • Dimensions (W x H x D): 396 x 214 x 165 mm
  • Weight: 5.4 kg
  • Colour: White
Kemper Profiling Amp Head WH Set Kemper Profiling Amp Head Bk + Remote ControlThe Kemper profiling technology allows the creation of a very precise sound image (profile) of an existing amplifier configuration (including speaker and microphone position). Thanks to the many internal processing possibilities, such as various stomp emulations (up to 4 simultaneous), master effects, equalizer, gain, amp definition, power sagging, etc., one can process the sound far beyond the possibilities of the original amplifier. However the Kemper Profiling Amp is also supplied with a large number of outstanding amplifier profiles, making the creation of custom profiles not absolutely necessary. Thus for the first time it is possible to accurately reproduce the sound of the amplifier of your choice, to modify it if you wish, and have it available for practicing, in the studio or on stage without the need for great effort.@+@+ Dimensions (W x H x D): 396 x 214 x 165 mm Weight: 5.4 kg Colour: White Incl. remote control footboard@+*Connections:*@+@+ Mic input Line in Alternative input Direct out Monitor out Master out (jack and XLR) S/P DIF digital input and output MIDI In/ out/ thru 2 Foot switch connections (jack) Network USB
2 144 €
Yamaha THR 100H Dual
Yamaha THR 100H Dual
Head amp for electric guitar
  • Dual version of the THR 100 - two completely independent amps in one housing
  • Single amp power : 100 W to 8/16 ohm or 50 W to 4 ohm
  • Dual amp power: 100 W (50 W + 50 W)
Yamaha THR 100H Dual Head amp for electric guitar Dual version of the THR 100 - two completely independent amps in one housing Single amp power : 100 W to 8/16 ohm or 50 W to 4 ohm Dual amp power: 100 W (50 W + 50 W) Class D power amp Amplifier types per amp: Solid, Clean, Crunch, Lead and Modern Emulated tube types per amp: EL34, 6L6GC, KT88, EL84 & 6V6 Effects: 2x Booster, 2x Reverb, Noise Gate FX Loop and Speaker Simulation 2 Instrument inputs: 6.3 mm jack Controls per amp: Amp Type, Booster, Gain, Master, Bass, Middle, Treble, Presence, Reverb & Level Rear panel controls / switches: 2x Class A / AB, ground lift, impedance selection: 4/8/16 Ohm and power output: 25/50 / 100W Headphone jack: 3.5 mm mini-jack Foot switch connection FX loop 2 Speaker connections and 2 XLR line outputs Dimensions (W x H x D): 445 x 248 x 125 mm Weight: 4.2 kg Incl. foot switch and power supply Optionally available carrying bag: #399063# (not included)
866 €
986 €
Kemper Profiling Amplifier BK Set
Kemper Profiling Amplifier BK Set
containing:
  • Thon Amp Case Kemper Profiling Amp
  • Kemper Profiling Amplifier Head BK
  • Wizoo Publishing Kemper Profiler Guide
Kemper Profiling Amplifier BK Set containing: Thon Amp Case Kemper Profiling Amp Kemper Profiling Amplifier Head BK Wizoo Publishing Kemper Profiler Guide
1 729 €
Yamaha THR 100H
Yamaha THR 100H
Head amp for electric guitar
  • Power : 100 W to 8/16 ohm or 50 W to 4 ohm
  • Class D power amp
  • Amplifier types: Solid, Clean, Crunch, Lead and Modern
Yamaha THR 100H Head amp for electric guitar Power : 100 W to 8/16 ohm or 50 W to 4 ohm Class D power amp Amplifier types: Solid, Clean, Crunch, Lead and Modern Emulated tube types: EL34, 6L6GC, KT88, EL84 & 6V6 Effects: Booster, Reverb, Noise Gate FX Loop and Speaker Simulation 2 Instrument inputs: 6.3 mm jack Controls per amp: Amp Type, Booster, Gain, Master, Bass, Middle, Treble, Presence, Reverb & Level Rear panel controls / switches: 2x Class A / AB, ground lift, impedance selection: 4/8/16 Ohm and power output: 25/ 50 / 100W Headphone jack: 3.5 mm mini jack Foot switch connection FX loop Speaker connection and XLR line out Dimensions (W x H x D): 445 x 248 x 95mm Weight: 3.6 kg Incl. foot switch and power supply Optionally available carrying bag: #399063# (not included)
519 €
588,72 €
DV Mark Multiamp Mono
DV Mark Multiamp Mono
Head amp for electric guitar
  • Combination of preamp, effects processor and power amp
  • Analog mono power amp
  • Power: 250 W at 4 ohms
DV Mark Multiamp Mono Head amp for electric guitar Combination of preamp, effects processor and power amp Analog mono power amp Power: 250 W at 4 ohms 3 Channels: Clean, Crunch, Lead Controls for gain, presence, level and master EQ with controls for bass, mids and treble MIDI input and output Virtual simulation for amps speakers and microphones Multi-effects processor SD card slot Mono input: Jack 2 Mono outputs: XLR / Jack Lightweight design Weight: 4.3 kg Format: 19" / 2U Installation depth: 324 mm Incl. adapter for rack mounting
999 €
1 149 €

Modelingová baskytarová komba

Roland Micro Cube Bass RX
Roland Micro Cube Bass RX
Basscombo with Battery Operation
  • 2 x 2.5 W stereo
  • 4 x 4" Speaker (lots of pressure)
  • Stero Mode (For the famous JC-120 chorus, stereo reverb, stereo recording out / stereo headphone operation and MP3 / CD player)
Roland Micro Cube Bass RX, baskytarové kombo na baterie, 2 x 2,5W stereo, 4x4" reproduktory (velký tlak díky velké ploše membrán), reprodukce stereo zvuku (pro slavný JC-120 Chorus, stereo reverb, stereo Recording Out / Stereo reprodukce do sluchátek a MP3/CD přehrávač), 6x amp modeling (lineární Super-Flat Amp pro nefalšovaný basový zvuk nebo Fretless, Ampeg B-15 Combo, Fender Bassman, Trace Elliot-Stack, Acoustic 360, SWR-Stack a Ampeg-Stack), mikrofonový předzesilovač, 7x DSP efekt: Chorus/Flanger/Touchwah + Delay/Reverb + Octaver-Preamp + kompresor, ladička, 3-pásmový EQ, „Rhythm Guide“ – bubeník s 11 styly (metronom, Rock 1, Rock 2, Blues, Country, R&B, Ballad, Jazz, Funk, Latin, Dance) a třemi variacemi, tlačítko Tap Tempo, Start/Stop a ovladač hlasitosti, konektor pro dvojitý nožní spínač, 6x AA baterie s výdrží až 13 hodin (možno volitelně dokoupit), vč. napájecího zdroje a popruhu, rozměry: 30 x 30 x 21 cm, hmotnost: 6,4 kg.
255 €
285 €
Fender Bronco 40
Fender Bronco 40
Bass Combo
  • Modeling
  • Power: 40 W
  • Equipped with: 1x 10" Fender Special Design speaker
Fender Bronco 40 Bass Combo Modeling Power: 40 W Equipped with: 1x 10" Fender Special Design speaker 1 Channel with 24 presets 8 Amp models (Rumble, 59 Bassman, Bassman TV, Bassman 300, Redhead, Rockin Peg, KGB800, Monster) Controls for Gain, Bass, Mid, Treble, Master, Preset, FX, Compression, Save Button, Exit Button and Tap Temp Button Built-in effects: Overdrive, Fuzz, Greenbox, Chorus, Flanger, Phaser, Vibratone, Envelope, Octave, Step Filter, Delay and Reverb Connections: Aux In, Headphone Out, USB, XLR output 2x Quick Access presets with optional 1-button foot switch #253297# possible (not included) USB Recording output compatible with Ableton Live Lite 8 Fender Edition software Dimensions H/W/D 38.73 x 28.57 cm x 45.72 Weight: 13.6 kg
289 €
Roland Cube 120XL Bass
Roland Cube 120XL Bass
Bass Amplifier
  • Combo with amp modeling
  • Power: 120 W
  • Equipped with: 12" loudspeaker
Roland Cube-120XL Bass, baskytarové kombo s amp modelingem, 120W, 12" koaxiální reproduktor, hluboký, silný a transparentní zvuk, dual custom Air Flow Port, Super Low amp modeling, digitální FFP technologie, 80 sekundový looper, Solo s pamětí pro použití na druhém kanálu, 8 amp modelingů slavných baskytarových zesilovačů, 7 efektů včetně nových funkcí Drive a Poly Octave, integrovaná basová ladička (chromatická nebo manuálníl), tlačítko SHAPE pro zvukovou variaci každého amp modelingu, možnost připojení externího basového boxu a PAD redukce vstupního signálu, DI-Box s Ground Lift, Line Out, Recording Out/ Phones, možnost připojení až 6 nožních spínačů/pedálů pro looper, efekty, paměť, rozměry (VxŠxH): 518 x 462 x 325 mm, hmotnost: 19,7 kg
609 €
659 €
Roland Cube 20XL Bass
Roland Cube 20XL Bass
Bass Amplifier
  • Combo with amp modeling
  • Power: 20 Watt
  • Equipped with: 8" loudspeaker
Roland Cube-20XL Bass, baskytarový zesilovač, kombo s amp modelingem, 20W, 8" reproduktor, hluboký, silný a transparentní zvuk, digitální FFP technologie, 6 amp modelingů slavných baskytarových zesilovačů, 7 efektů vč. Poly Octave, integrovaná basová ladička (chromatická nebo manuální), tlačítko SHAPE pro zvukovou variaci každého amp modelingu, možnost připojení 2 nožních spínačů/pedálů, Power Squeezer pro velký, bohatý zvuk i při nízké pokojové hlasitosti.
259 €
285 €
Roland Cube-60XL Bass
Roland Cube-60XL Bass
Bass Amplifier
  • Combo with amp modeling
  • Power: 60 Watt
  • Equipped with: 10" loudspeaker
Roland Cube-60XL Bass, CB-60XL, baskytarový zesilovač, kombo s amp modelingem, 60W, 10" reproduktor, hluboký, silný a transparentní zvuk, dual custom Air Flow Port, Super Low amp modeling, digitální FFP technologie, 80 sekundový looper, Solo s pamětí pro použití na druhém kanálu, 8 amp modelingů slavných baskytarových zesilovačů, 7 efektů včetně Poly Octave, integrovaná basová ladička (chromatická nebo manuální), tlačítko SHAPE pro zvukovou variaci každého amp modelingu, DI-Box s Ground Lift, Line Out, Recording Out/ Phones, Line Out, Recording Out/ Phones, možnost připojení až 6 nožních spínačů/pedálů k looperu, Power Squeezer pro velký, bohatý zvuk i při nízké pokojové hlasitosti.
479 €
539 €
Fender Bronco 40 Bundle
Fender Bronco 40 Bundle
containing:
  • Fender Bronco 40
  • Thomann Cover Fender Bronco 40
Fender Bronco 40 Bundle containing: Fender Bronco 40 Thomann Cover Fender Bronco 40
321 €

Tranzistorové baskytarové hlavy

Markbass Bass Multiamp Stereo
Markbass Bass Multiamp Stereo
Amp Head for Electric Bass
  • Stereo output stage with 2 x 500 W at 4 Ohm or 1000 W mono at 8 Ohm
  • Digital stereo preamp
  • 3 Channels
Markbass Bass Multiamp Stereo Amp Head for Electric Bass Stereo output stage with 2 x 500 W at 4 Ohm or 1000 W mono at 8 Ohm Digital stereo preamp 3 Channels Controls for gain, presence, level and master 3 Band EQ with controls for bass, mids and treble 12 Amp simulations Virtual Speaker Cabs and Microphones Over 300 factory presets 8 Assignable slots per preset 15 Effects Tap Tempo function 3 Output Modes Chromatic tuner MIDI-enabled Slot for SD card Headphone output Effect path Light weight (4.3 kg) Rack format (2U) Includes mounting bracket for rack mounting
1 299 €
1 525 €
Markbass Bass Multiamp Mono
Markbass Bass Multiamp Mono
Mark Bass Multiamp mono amp, head for bass guitar, mono amplifier 500 watts at 4 ohms, digital stereo preamp, 3 channels, controls for gain - presence - level - master, 3 band EQ with controls for bass - mid - treble, 12 amp simulations, 8...
1 071 €
1 399 €
Kontakt
Tel: +49-9546-9223-20
Fax: +49-9546-9223-24
Vašimi slovy
Príšte Vašich služeb znovu rád využiji a dám o nich vedet kolegum, muzikantum. Klobouk dolu, díky moc!
mxxxxik@sxxx.cz, 10.12.2015

Amp modeling v přehledu

(2)
(2)
Váš názor

Našli jste nějakou chybu nebo byste nám chtěli něco k této stránce sdělit?

Těšíme se na Vaši zpětnou vazbu a problémy pro Vás co nejrychleji vyřešíme.

Storno