the t.bone SSM 4

238

Microphone Shock Mount

  • Suitable for all microphones with diameter between 22 - 26 mm
  • e.g. SC100, SC150, KM184
  • 5/8" Thread
  • Optional thread reducer to 3/8" available under art. 104870
disponibil din Iulie 2004
numărul articolului 170674
unitate de vânzare 1 bucată(ăţi)
Colour Silver
48 lei
Include TVA la care se adaugă 89 lei costul de transport
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Expediere preconizată până Vineri, 26.04.
1

238 Evaluările clienților

4.4 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Măiestrie

127 Recenzii

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
M
Great for dynamic mics on drums
Moogieman 09.04.2019
I have no idea what this mount was created for (perhaps an SDC) but I've found it incredibly useful for pointing a dynamic mic at a tom or snare. Holds typical (SM58 shape) mics very securely, and the shockmount means you can mount the mic on cymbal stand and/or be a little less worried about a drummer hitting the holder during recording.
Măiestrie
1
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
CQ
More versatile than you'd think!
Chris Q. 21.04.2020
So I got this as a replacement for the one that came with my RM700 that had rattled itself to pieces over the last 5+ years of loud guitar and bass amps. But little did I realize how flexible it is until I couldn't find the clamps for my Oktava MK012's and swapped it for one of these. Worked great, really secure! I'd recommend these for any pencil mic or SDC style microphone - Neumann KM184, Oktava MK012, Beyer M201 etc.

I suppose the only downside is they don't last forever. But at this price point it's quite a small issue.
Măiestrie
0
1
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
PP
Shock Mount from t.bone?
Peter PG 28.04.2021
I was looking for a decent shock mount for Neumann KM184. The quality is really good and the mic sit perfectly in it. Surprisingly high quality... so I bought 5 more! All are mechanically perfect. I gave one star less for one single reason: the elastic band is too strong and I would have preferred a softer one. I did not test on the field, but it definitely would absorb rumbles better with a softer one. You may change it easily. By the way: you can squeeze in a Royer-121 and it is ok, but not ideal. Oktava MKs? NO, not the right diameter, unless you put extra foam in it. Good work.
Măiestrie
1
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
I
Okay but takes a lot of squeezing
Ian1150 26.01.2015
In order to work with a wide variety of sizes of mics, this little clamp needs a hefty spring and that's what it has got.

However it's design and the little bit of foam rubber inside the metal part makes it also useful for holding dynamic mics too.

When stuck for a bass drum mic recently I put a 57 Into this clamp no problem, despite it being not of uniform diameter.

Next time I order I'll stick a couple of these on to take to any studio I visit - because this could be a life saver in those situations where the clip you need has disappeared.

As I stated in another review of a similar clamp - this clamp was much improved with a little lubrication on all the moving parts and allowed the joint to be tighten tighter and with less resistance.
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz