the sssnake SXX8030

727

Multicore Cable

  • 8-Way
  • XLR female to XLR male
  • Length: 3 m
  • Colour: Black
numărul articolului 105054
unitate de vânzare 1 bucată(ăţi)
Channels 8
Length 3,00 m
Connector 1 XLR 3-pol male
Connector 2 XLR 3-pol female
Balanced Yes
Length In cm 3,00 m
Input 8
Returns 0
Snake 1
Mai mult
111 lei
Include TVA la care se adaugă 89 lei costul de transport
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Expediere preconizată până Joi, 25.04.
1

727 Evaluările clienților

4.5 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Măiestrie

Manipulare

246 Recenzii

s
sunet 27.09.2017
E bun pentru a conecta aparatele dintr-un rack cu multicorul, pastrand la transportare acest cablu inauntru in rack
Măiestrie
Manipulare
0
0
semnaleaza un abuz

semnaleaza un abuz

s
sabau 15.05.2023
SUNT OK DOAR CA SE INCURCA MUFELE PREA USOR
Măiestrie
Manipulare
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
y
Great Quality for price
yanickflyer 21.12.2020
Use:
I have been it between my T Amps and QU-24 Mixer from A&H
So it is used to carry my mix output signal to my amps

Pros:
Very good quality and build for it's price range
Does not have feedback/humming and I have been using it for over a year
Good plain solid cables

Cons
As for handling, the female connector part is a bit too tight. You could damage the connector if not careful

I would just slightly loosen the female connector to make it easier to remove as well
Măiestrie
Manipulare
0
1
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
o
Good solution
olyp 22.05.2023
We had individual cables between our wireless microphone receivers and our digital mixer, at my church, which had to be setup and disconnected every week.

To help other volunteers in my technical team, I had labelled these cables and the end points on the receivers, using rather messy looking manual labels with paper and tape. and the cables were prone to becoming tangled.

With this cable which is labelled on both ends, gone is the messy labels, and its so neat looking and elegant way - this is definitely how things should be done. It will make our setup and packing up, so much faster.

The cables worked 1st time, when I replace our old cables at church last week.
Măiestrie
Manipulare
0
0
semnaleaza un abuz

semnaleaza un abuz