Tama CB90FH Felt Beater Head

115

Beater Head

  • For Iron Cobra bass drum pedals
  • Surface: Felt
disponibil din Februarie 2001
numărul articolului 146286
unitate de vânzare 1 bucată(ăţi)
Type Beater
88 lei
Include TVA la care se adaugă 89 lei costul de transport
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Expediere preconizată până Joi, 25.04.
1

115 Evaluările clienților

4.5 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Măiestrie

28 Recenzii

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
JS
Perfect beater for my purpose
Johan SpinOff 28.12.2019
I bought this as a replacement beater head for my Tama Speedcobra. The beater head that was supplied with it was too hard for my taste.

With this beater head attached my kick drum just sounds the way I want it.
It's a very easy replacement. Angle can be adjusted, ... It packs more features than I would ever have expected this kind of product could have or need!
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
j
Simple replacement for worn-out Iron Cobra beater heads.
jonathanhoey 23.06.2014
I bought a pair of these beater heads to replace the worn-out original beater heads that came with my Iron Cobras. (I had played almost 100 gigs with them, as well as hundreds of hours of rehearsals, so I have nothing bad to say about their longevity!)

Fitting them is very straightforward, requiring only a drum key. Loosen the single bolt, turn the head through 180 degrees (so the felt side faces the back) and lift off. Pop the new one on (also upside down and backwards), rotate until it faces the front, and tighten the bolt. It takes seconds.

Note that this package does not include the shafts - this item is the beater *head* only. So it's only suitable as a replacement if you already have Iron Cobra beaters with the cylindrical T-bar at the top. If you're replacing a different model of beater, then the item you need is the CB90F, which includes the shaft.
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
The felt does ware away
Anonim 17.09.2015
This is a great beater head, and is the beater head of my choice, as it feels great to play with, gives a good response from my pedal and a nice sound from the bass drum. I have never had any trouble with the connection of this beater head, it fits to my iron cobra pedal as it should and has never fallen out of place.
The only trouble i have found with this beater head, is only to be expected, but I am now finding myself having to replace the head only after a short amount of time, as the felt wares away sometimes leaving sharp bits of glue that then can damage the bass drum head, if it is not changed in time.
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
M
Best replacement
Mrtnkrz 21.06.2021
Great beater, original cobra sound, construction and feel. Less durable than the rubber version but sounds more balanced to my ears
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz