Neutrik NP3 TT-P-B

29

Telephone plug (black)

  • 3-Pin 4.4 mm Bantam jack plug
  • Solder terminals
  • Black case
  • Nickel coated contacts
  • Shield and sleeve contact for crimp processing with standard RG58 HEX crimping tool
disponibil din Februarie 2004
numărul articolului 167894
unitate de vânzare 1 bucată(ăţi)
Installation No
Mono/Stereo Stereo
Angled No
Type TRS (stereo/sym.)
Plug TT-Phone (Bantam 4,4 mm) male straight
29 lei
Include TVA la care se adaugă 89 lei costul de transport
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Livrare aprox. între Joi, 25.04. și Vineri, 26.04.
1

29 Evaluările clienților

4.6 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Măiestrie

8 Recenzii

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
S
Neutrik NP3 TT-P-B
SeanK 29.12.2015
These connectors are great and very serviceable

Neumann recommends using a crimp tool, but I don't think this is necessary as the stripped braided screen, once folded back over the outer sheath of the cable provides enough additional girth to the overall diameter of the cable, to make the cable a tight fight. The inside of the rear end of the connector is threaded which means that you have to screw the prepared cable into the the connector. The good thing about this is that, whilst a little fiddly to screw on the connector, it provides a really good connection of the cable screen to the metal body of the connector, leaving only the two inner cores requiring soldering. It also means that the connector can be removed in the event of cable failure over time and reused to make up another cable.

Once prepared, the screen is tucked in nice and tightly and well away from the solder terminals, making short circuit near impossible.

The plastic connector cover slides on really easily and precisely and 2 narrow slots in the cover mean that the connector can easily be removed using a small screwdriver

Neumann have a winner, here.
Măiestrie
4
0
semnaleaza un abuz

semnaleaza un abuz