K&M 18810 Omega Black

1028

Keyboard Table "Omega"

  • Locking screws on both sides for incremental height adjustment
  • Support arms individually adjustable to the size of the keyboard
  • Flat pack size
  • Load capacity max. 80 kg, the optional second level (not included) up to 25 kg
  • Weight: 9.5 kg
  • Height: 600/1020 mm
  • Support distance adjustable by: 180 - 790 mm
  • Support depth: 345 mm
  • Assembly size: 1050 x 575 mm

Suitable accessories (not included):

  • Attachment K&M 18811: Article no. 437888
  • 3rd level K&M 18822: Article no. 463951
  • Shorter support arms K&M 18827: Article no. 484281
disponibil din Mai 2009
numărul articolului 228727
unitate de vânzare 1 bucată(ăţi)
Keyboard Supports 1
598 lei
Include TVA la care se adaugă 89 lei costul de transport
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Livrare aprox. între Joi, 4.04. și Vineri, 5.04.
1

1028 Evaluările clienților

4.8 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Stabilitate

Manipulare

Măiestrie

555 Recenzii

E
Mega stabil
Eusebiu 03.06.2022
Un stativ corect!
Totuși primește 4 stele la manipulare pentru ca e greu de transportat, în sensul ca nu se împachetează cum as fi vrut eu.
Menționez ca atunci când l-am cumpărat eu nu era apărut Omega Pro 18820, care DA! Se face mic!
O grămadă de accesorii poți pune pe el, ceea ce îl face util!
Stabilitate
Măiestrie
Manipulare
0
0
semnaleaza un abuz

semnaleaza un abuz

AD
Perfect!
Ady DeeJay 24.10.2017
Perfect pentru scena si acasa. Usor de montat, demontat si depozitat. Recomand!
Stabilitate
Măiestrie
Manipulare
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
Beautifully strong
Anonim 12.07.2016
I have just suffered a double braced X stand failing under the weight of my Kawai MP7, damaging the Kawai and some other pieces of equipment. Fortunately the stand was bundled with the MP7 so I have some legal redress against the store (which is NOT Thomann).

I look after my equipment because I want things to look good and work properly. After this accident the first place I looked was K&M because I wanted a brand that I knew I could trust and that wouldn't cut corners on quality.

The stand arrived and was very easy to put together. Just a case of inserting the legs and cross pieces and screwing on the heavy duty hand tightened nuts. I also purchased the additional arms 18813 to place an additional level above. These, again, just hand tighten onto the main frame. The second level is adjustable for height and the angle of tilt. In addition I purchased the additional 18819 tray for my keyboard and mouse. This tray fits securely over the 18813 arms and is sufficiently strong to take the full weight from both your arms without flexing or moving. I set the 18813 arms wide enough that I can still fit and use the music stand on the Kawai but at this width I needed to reverse the bolts on the arms so that the knobs on the nuts were on the inside. Set up this way the tray fits properly. If you didn't need the arms so far spaced then no change would be necessary. The arms adjust high enough to accommodate the music stand but I will need to remove the tray to use music on it. This is ok for my usage of the Kawai as a separate piano or as a MIDI controller for my DAW.

The stand is very well made. It is sufficiently big enough for a heavy 88 key digital piano but it is an easy job to move the fittings for smaller boards. The sturdy legs adjust with a sprung knurl wheel. The leg holes are marked with numbers to facilitate getting both sides level. Some reviewers have commented that this stand is best for the studio because it doesn't fold. But I would say that as it only requires 4 hand tightened nuts to be removed to dismantle it into a flat packed unit and reassembly takes a couple of minutes it is eminently suitable for gigging musicians too. We all like convenience but a convenient stand has caused me heartache. I'd rather have peace of mind with a quality stand.
Stabilitate
Măiestrie
Manipulare
6
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
pr
Wobbles with mp11se and vigorous playing
piano review 04.03.2022
After reading countless reviews where this stand was recommended for heavy pianos (like my mp11se), I decided to order it and give it a try. Unfortunately, when I play particularly loud and fast pieces of music (e.g. Rachmaninoff), the piano and stand get quite the front-back wobble/vibration going, to the point where it is distracting and disappointing. It is not enough to really create an error as my fingers still come down where they were supposed to. However, it removes the illusion that one is playing an acoustic piano.

Thomann pointed out that this is not uncommon with heavy pianos with this style of stand, so return shipping would have been on me. Thus, I decided to troubleshoot different ideas to get the wobble to go away.

Putting it on a rug helped. The final change was a tension rod placed between the base of the piano and the top of the horizontal part of the leg, one per side. That has removed essentially all wobble.

It is confusing how so SO many people (many with the exact same setup) say this stand is 'rock solid', but mine is not. I think it comes down to how you play. Fast and hard - maybe try the K&M 18950?
Stabilitate
Măiestrie
Manipulare
2
0
semnaleaza un abuz

semnaleaza un abuz