Göldo E250P

134

Push-Pull Poti

  • 250 kOhm
  • For drawing
  • 2-Way selection switch
  • 6-Pins
disponibil din Decembrie 2006
numărul articolului 112185
unitate de vânzare 1 bucată(ăţi)
Design Push Pull
Resistance Value 250 kOhms
Tandem Poti No
Push/Push Push/Pull
Solderless No
shaft type grooved
58 lei
Include TVA la care se adaugă 89 lei costul de transport
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Expediere preconizată până Vineri, 26.04.
1

134 Evaluările clienților

4 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Măiestrie

51 Recenzii

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
M
Great Pot, good connections, quality feel.
Milodon 14.09.2018
Very good pot. Used to MOD an old guitar humbucker to coil split.
Very easy to install and use, only CON is it is quite tall! you MAY have to remove some material inside the guitar to make this fit in place of a regular pot.

I had to remove 4mm of material from the body inside my Strat to get the scratchplate to fit level again. This is on a standard USA strat in the VOL position, so as you can see if you are less confident with tools/basic luthiery, maybe ask your local guitar shop to fit it in this case.

Overall though, great sturdy pot which will last for years, great solid feel, no interference on the pickups when it is pulled (unlike some) so would reccommend, just check dimensions first!
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
t
teaberryou 30.06.2020
I really like 99% of Goldo products, but this time it's just a pass. Yes, it got the job done, but it feels a bit flimsy compared to the Allparts and Fender versions. After fitting, the axle has a little play in it, which makes the knob go ka-klunk after I release it. It's the first time I'm using it for my builds (because the Allparts version wasn't in stock), so maybe it's just this piece I have, and not all of them. It's not a deal breaker, but if given the choice I'd stick to Allparts for my builds.
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
g
Works Great
gDaddy 14.11.2017
Bought to replace pot in a bass guitar. Works Great.
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
j
nice functional pot!
jerrry 14.09.2018
I took this pot to enable transition between parallel/series connection on humbuckes. It works fine and it gives you a feature nice to have in a guitar, but I think the quality is a little bit cheapish...
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz