Adam Hall 87222STL U-Rack Panel 2U

299

U - Rack Panel

  • 1.2 mm steel
  • Format: 19 " / 2U
  • Colour: Black
disponibil din August 2008
numărul articolului 214130
unitate de vânzare 1 bucată(ăţi)
Rack Units 2 U
Type 19"
23,40 lei
Include TVA la care se adaugă 89 lei costul de transport
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Expediere preconizată până Joi, 25.04.
1

299 Evaluările clienților

4.9 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Măiestrie

87 Recenzii

P
Good
PaulTC 04.05.2021
good product.
you wouldn't need anything more expensive
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
K
Thick and strong.
Karmo7 08.03.2020
I made my own I/O panel out of this.
It has i matte black finish, in case you are not a fan of glossy things.
It's made of steel. Strong and sturdy. No dents or defects were caused by drilling the holes. I fitted 24 type-d XLR sockets on this.
Măiestrie
1
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
I
The right one to fill the empty space..in your rack
I'mTheSoundGuy 23.10.2019
As I stated above, this 2 U panel is the perfect solution when you want to close a gap on you rack. I use it in an IEM/Wireless mics rack where I have 2 units left and it hides the cables inside the rack. Solid construction with no bending because of the 90 degrees dented lower side. Great product!
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
P
Good quality 2U panel and very strong
Pete-plays-guitar 25.04.2017
There is not a lot you can say about a 2U rack panel, but I will have a go.

One major thing (I think is major) is that the end of the strip top and bottom is bent over at 90 degrees with makes this a very stiff and strong panel, especially when combined wit the fact that is it a quite heavy gauge steel it is pressed from. Many rack strips have no bent edge which makes them flex and this starts to make the paint crack, so no problem with this one.

Once fitted int the rack, it is rock solid. I would also have no problems in drilling into this strip for fitting plug sockets etc.

Highly recommended
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz