Power Pins Bridge Pin Set V2 BK

93

Power Pin Set for Acoustic Guitar

  • Bridge pins that do not have to be removed to change strings
  • No modifications to the instrument necessary
  • Version 2 with Power Plate under the bridge
  • Increased sustain due to larger contact area
  • Low E- and A-strings are marked with "B", D- and G-strings with "M", and B- and the high E-string with "T"
  • Colour: Black
  • Set of 6 pins

Note: Only suitable for strings up to .012 in thickness

Produkt dostępny od Październik 2014
Numer artykułu 343829
Jednostka sprzedaży 1 szt.
205 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Szacowana dostawa pomiędzy Czwartek, 4.04. and Piątek, 5.04.
1

93 Oceny klientów

4.4 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

74 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
GG
they do the opposite of what they supposed to do
GCH Guitar Academy 06.02.2021
They don't work and they actually reduce the power and tone of your guitar. I did extensive tests, some of which you can find on the GCH Guitar Academy YouTube channel. They lift the anchor point of the strings so they reduce the brake point on the saddle and therefore the amount of pressure the strings put on the saddle. By reducing the pressure the strings put on the saddles you reduce the transmission of sound into the guitar body. I did before and after tests and can confirm THEY DON'T WORK.
wykończenie
6
1
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
MM
Excellent Upgrade
Mr Marcus 12.03.2022
Have them on my 2 Hummingbirds and just got them for my Jazzmaster Acoustasonic. Such simple mid gig string changes, and stops string tails falling into the delicate electrics of the acoustasonic (a bad design fault on Fenders behalf in my opinion)
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
SW
A must for acoustasonic
Shaun W 17.02.2023
Installed on my paisley pink acoustasonic. These are absolutely essential on these guitars to prevent the ballend from falling into the electronics cavity if a string breaks. Installing was a very straightforward process, I didn't need to use the supplied bar as the acoustasonic has a brass grounding plate under the bridge already. One pin was tricky to place but this was due to my bridge hole being countersunk too deep on one side, I remidied this myself without much difficulty and it does not effect the pins performance. I personally have noticed more resonance and sustain from the guitar. I would recommend these for all acoustasonic or gigging guitars for ease of string changing but I don't think I would put them on my high end acoustics that I use for recording. I'm personally ordering another two sets for my other gigging acoustics.
wykończenie
1
1
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
m
Eşik durumunuzu kontrol edin...
metocaster 22.03.2021
Benim gitarım da eşik yeterli yükseklikte bu yüzden ton kaybı ya da çınlama yaşamadım. Ancak etiğiniz alçaksa tel-eşik açısı yüzünden sıkıntılı olabilir...Kolay takılıyor, sustaini cidden arttırdı, tavsiye ederim..
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie