Doepfer A-100PSU3

32

Doepfer A-100PSU3 Powersupply

  • +12 V / 2000 mA
  • -12 V / 1200 mA
  • +5 V / 4000 mA
  • 100 - 230 V

ATTENTIE: de aansluiting en de installatie van onderdelen, het netsnoer (vermogen, voeding, aansluitkabels, etc.) mogen alleen worden uitgevoerd door een vakman die vertrouwd is met de geldende veiligheidsvoorschriften. Leken kunnen dergelijke inbouwtechnieken of bedradingen nooit zelf! Alle Live-onderdelen, (kabels, interconnects, componenten) moeten voor het gebruik absoluut gebruiksveilig worden geisoleerd, zodat per ongeluk aanraken van de onderdelen uitgesloten is!

Leverbaar sinds Januari 2016
artikelnummer 377376
verkoopseenheid 1 stuk
Blank Panel No
Bus Cable No
Bag No
€ 155
alle prijzen incl. btw
direct leverbaar
direct leverbaar

Dit product is op voorraad en kan direct verzonden worden.

Informatie over de verzending
Gratis verzending verwacht tussen Woensdag, 3.04. en Donderdag, 4.04.
1

32 Klantenbeoordelingen

4.9 / 5

U moet ingelogd zijn om producten te evalueren.

Note: Om te voorkomen dat evaluaties gebaseerd zijn op roddel, geruchten of heimelijke advertentie staan wij op onze website alleen evaluaties toe van daadwerkelijke gebruikers die het geevalueerde product bij ons gekocht hebben.

Na inloggen vindt u alle producten die u kunt evalueren ook onder “Product evalueren” in uw klantencentrum.

features

afwerking

24 Recensies

google translate gb
Helaas is er een fout opgetreden, probeert u het a.u.b. later nogmaals.
c
Fantastic PSU
colon 28.07.2020
I have 2 x 9u 84hp cases, each has a psu3 in it. They are very stable and more than anything else protect you from reverse polarity accidents. I have made that mistake several times and each time all the lights on the other other modules flash at about once a second, telling you have got the cable the wrong way round. I have experienced no damage to any module when this has happened. Each case has around 20 modules in it and there is plenty of reserve current for current hungry modules. It also has a built in 5volt supply which is very handy for the occasional module that needs 5volts. I have had the psu for over 3 years now, with daily use. Highly recommended.
features
afwerking
2
0
Evaluatie melden

Evaluatie melden

google translate gb
Helaas is er een fout opgetreden, probeert u het a.u.b. later nogmaals.
p
Great!
pedroas 20.04.2020
I've replaced a PSU2 with this unit and its a huge difference in weight and stability. Also quite simple to mount it back on the case and the instructions are available on the page product. Thanks!
features
afwerking
1
0
Evaluatie melden

Evaluatie melden

google translate gb
Helaas is er een fout opgetreden, probeert u het a.u.b. later nogmaals.
YF
Don't waste your time with cheaper alternatives
Yann F 17.08.2023
I changed my janky power setup on my modular rig for this a few months back for a Doepfer PSU and rails, and it's probably the best investment I did for it! I had so many weird problems with many modules plus a problematic noise floor that I blamed on the individual modules.... but no! This was it! Just bad power. Swapping for this took care of literally every problem I had with my system.
features
afwerking
0
0
Evaluatie melden

Evaluatie melden

google translate gb
Helaas is er een fout opgetreden, probeert u het a.u.b. later nogmaals.
MD
Reliable and quiet
Martin Dupras 14.05.2021
I have four of those in a custom-built rack, powering over 32 modules, some of which quite power-hungry. The power supplies have been very reliable. No noise issues, no unexpected behaviour. They look well built and well designed.
features
afwerking
0
0
Evaluatie melden

Evaluatie melden