Warwick Just A Nut III 4-string 38,5mm

86

Nut

  • For 4-string basses and fretted instruments
  • Width: 38.5 mm
  • Material: Plastic
  • Includes 1.5 mm Allen key
In catalogo dal Giugno 2007
Numero di articolo 115433
Unitá incluse 1 Pezzo
Width in mm 38 mm
Unmachined No
Instrument 4-String Bass
€ 23,30
IVA inclusa,€ 15 di costi di spedizione aggiuntivi
disponibile
disponibile

Questo prodotto è disponibile e può essere spedito immediatamente.

Informazioni sulla spedizione
1

86 Valutazioni dei clienti

4.6 / 5

Devi effettuare il login per poter lasciare una recensione.

IMPORTANTE: Per evitare di inserire informazioni per sentito dire, non complete o sbagliate, permettiamo di dare un giudizio delle attrezzature solo ai nostri clienti che hanno comprato la merce direttamente da noi.

Dopo il Login trovi nella tua area cliente troverete sotto la sezione "Giudica i prodotti" tutti gli articoli ai quali potrete dare un giudizio

Qualità

37 Recensioni

n
Un buon aggiornamento
nicoladreamer 15.06.2022
Oramai il capotasto in ottone del mio Warwick Corvette era da sostituire, invece dell'originale, con le viti regolabili per ogni corda, ho deciso di installare questa nuova versione; il suono non è cambiato ed è piu semplice la regolazione dell'altezza corde. Ottimo ed originale
Qualità
0
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
B
Great replacement nut
Bassios 10.01.2022
After swapping out the strings on my bass for some significantly thicker gauge strings and having to file the nut slots to accept the thicker strings, I realised that I needed something a bit more flexible if I was to return to regular guage strings.

Installation was relatively simple, though I had to move the truss rod cover on my bass (Ibanez GSR180) as this nut is maybe 2mm thicker than the original (It's also about 2mm narrower, which means the strings are marginally closer together at the nut, though I'm not too concerned as it doesn't seem to have affected the intonation at all). I still need to do a bit more work to get the string height correct, such as filing a bit of a slot into the neck for the baseplate to sit in as it's just a bit too high currently, but other than that minor issue this has been a breeze to install and set up.
Qualità
0
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
P
Superb adjustable nut - ideal string height possible
Paul014 05.12.2013
Rather than hope your bass nut is glued in the right place and will never wear, this adjustable nut is totally brilliant and still sounds good. I think only a zero fret is better. This should be on every bass!
Qualità
3
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
L
Great replacement nut, much better than the original
LoTone 17.08.2014
Unfortunately on my Rockbass Corvette the original nut broke and I had no repair shop near by. So I ordered this replacement part and tried my luck in repairing it on my own.
With a courageous hit I removed the old nut, sanded off the old glue and then glued in the new nut. All worked fine!
Now I have a nut that seems to be much more sturdy, is easier to position and fine-tune, looks nice and did not destroy the sound of the bass. I even imagine the sound has improved a bit... But I'm not really sure. My mind might play tricks on me.
But all in all it seems to me as if it was a good tradeoff. Great nut!
Qualità
4
0
Segnala un abuso

Segnala un abuso