There are 51 items in this product group. Please use the search function in the navigation bar to narrow down results.
Entries 1 - 25 are shown.
Sort results by:
BEHRINGER MX882 ULTRALINK PRO
Behringer MX882 Ultralink Pro splitter/mixer - 2in/6out or 8in/2out, stereo main in/out switch, 6 channels with level and balance, pan switches, XLR main input/output, 4 channels with XLR I/O's, 2 channels with jack I/O. Dimensions: 19" x 1U.
THE T.RACKS EIGHT
the t.racks Eight - 8-channel microphone splitter, 8x XLR inputs, 16x XLR outs, direct output and link out per channel, phantom power link to main out, output ground lift switch, switchable input link. Dimensions: 19"/1U
RADIAL ENGINEERING X-AMP
Radial Engineering X-AMP active re-amping box - transforms a +4dB signal into a hi-impedance signal for connection to guitar amps or FX pedals, 1x XLR in, 2x jack out, phase reverse switch, output gain control. Includes power supply.
PALMER PPB 20 S PRESS-BOX STEREO
Palmer PPB20S Stereo Press Box - active distribution system, 2 inputs, 20 outputs with transformers. (A press patch box is an audio signal distributor intended for use at press conferences.) Separate inputs for microphone and 2x line signals, signal monitoring via 10-segment LED strip (-40 to...
LITTLE LABS REDEYE 3D PHANTOM
Little Labs Redeye 3D Phantom - passive DI/re-amp/expansion splitter unit, 1/4" TRS instrument input, 1/4" TRS instrument re-amp output, XLR line in, mic level out (XLR), expansion I/O (1/4" TRS), phase invert, pad switch.
KLARK TEKNIK DN1248 PLUS FM
Klark Teknik DN1248 Plus FM - professional microphone splitter system, transformer balanced outputs and two integrated in power supplies, 12-in/48-out, 19"/3U, headphone out, solo, 48V, ground lift, pad switches.
THE T.RACKS DS2418
The T.Racks DS2418 Audio Splitter - 2:4 or 1:8, each output is controllable with its own volume control, XLR inputs & outputs. Dimensions: 19"/1U (depth: 12cm)
MILLENIUM HX 3
Millenium HX3 Active Guitar Splitter - for use with 2 amps in parallel, unbalanced jack input, jack link out, isolated jack out with switchable phase reverse, Lo-Z jack out, adjustable gain. Requires 1x 9V battery or optional 9-15V DC power supply.
RANE SM26 S SPLITTER MIXER
Rane SM26 S Splitter Mixer, 6 in 2 out/2 in 6 out, level and pan on the front, jack in and out on the rear, Master input and Master output, 19" 1 unit
ART S8 MICROPHONE SPLITTER
ART S8 - 8-channel microphone splitter. Can be used to split eight balanced low-impedance microphone signals into sixteen (eight pairs). One direct output and one transformer-isolated output on each channel, direct outputs pass phantom power from the input for use with condenser microphones,...
ART S8-3-WAY MICROPHONE SPLITTER
ART S8 3-Way - 8-channel, 3-way microphone splitter with passive interface. One direct and two transformer isolated outputs per channel, balanced XLR input and 3x balanced XLR outputs per channel, extremely wide frequency response, rack-mountable.
LEHLE P-SPLIT II
Lehle P-Split II Passive Splitter - simultaneous routing of one instrument to two amps, outputs galvanically separated LTHZ high end transformer to eliminate hum, phase reverse & ground lift switches with gold contacts.
RADIAL ENGINEERING TONEBONE BIGSHOT ABY
Radial Engineering Tonebone Bigshot ABY - the little brother of the Switchbone, switch between two amps or both together, ground lift, phase switch, tuner output.
PALMER PPB 10S
Palmer PPB10S Press Patch Box - balanced transformer isolated audio splitter with 1x female XLR line input and 10x male XLR outputs, ground lift switches on all inputs and outputs, adjustable input level with LED display, adjustable headphones output, line bus in and out to cascade more press...
DRAWMER DA6
Drawmer DA6, 2x6 Stereo Distribution Amp with Monitoring, 1 set of stereo (2) XLR inputs, 6 sets of stereo (2) XLR outputs, Input stage has LED level meter, Each output channel can be switched to mono, Each output channel can be individually monitored, Built-in headphone amp, Optional...
PALMER MI DMS
Palmer MI DMS, switch for dynamic mickophones, 1x XLR Input, 2x XLR Output, footswitch, to switch between Technican and FOH, split for different microphone channels, split for different zones
RADIAL ENGINEERING HOTSHOT DM1
Radial Engineering HotShot DM1, microphone muteswitch and splitter as footpedal, for dynamic microphones, switchable GDN-Lift, XLR in/out, also as Talkback between musician and crew or to mute Hardware as Vocalists etc.
ART PROSPLIT
ART Prosplit, 1 channel Microphone splitter, 1x Mic Input XLR, 1x direct output XLR + 1x transformer isolated output with ground-lift switch, the direct output passes phantom power from the main mixer to the microphone, PAD Swicth for Input Channel
PALMER PLS-02 LINE SPLITTER
Palmer PLS-02 Line Splitter Box - 2-channel splitter with female XLR inputs, parallel male XLR output plus two male transformer balanced XLR outputs, ground lift switch. Includes 5-year warranty.
ART SPLITMIX4
ART SplitMix4, 4 Channel passive hybrid mixer/splitter, Four Stereo Input Channels, Stereo Output, Independent stereo level controls are provided on each channel, Passive Design (No Power Supply Required), Over 90dB of Attenuation, All 1/4-inch connections are stereo TRS (Tip, Ring, Sleeve),...
KLARK TEKNIK SQUARE ONE SPLITTER
Klark Teknik Square One Splitter – 8-in/24-out splitter with gain controls, 30Hz lo-cut filter, 48V phantom power, solo and 4-segment LEDs per channel, headphone output, inputs on front and rear (with switcher), 8x outputs at front, 16x outputs at rear. Dimensions: 19"/2U
Offers include 20% British VAT and are valid as long as stocks last. Shipping costs to the U.K. are 10 EUR (10 GBP), free shipping on orders above 199 EUR. Please click here for international Shipping rates. We do not accept liability for typographical errors or inaccurate information of any kind. *RRP = manufacturer's / distributor's recommended retail price in Germany
