SE ELECTRONICS SE 2000
SE Electronics SE 2000 - large diaphragm, cardioid pattern capacitor microphone that utilises a one inch, centre terminated, gold sputtered mylar diaphragm capsule in conjunction with low noise Class A, FET circuitry and a transformer balanced output stage. It features a wide frequency response with a very subtle presence lift and is suitable for recording studio vocals as well as most acoustic instruments and ensembles. All SE microphones are closely matched, making them ideal for stereo applications, and the SE2000’s are particularly recommended for recording vocals and acoustic instruments. 48 Volt phantom power is required. Frequency Response: 20Hz-20KHz, 100Hz switchable high-pass filter, -10dB switchable pad, Sensitivity: >16m V/Pa -36*+/-2dB, Output impedance: < 200 Ohms, Output Noise: < 17dB typical, (A weighted), THD: < 0.5% at 125 dB SPL, The sE2000 comes in a wooden box with shock separately packed in a card box.
SE ELECTRONICS REFLEXION FILTER
Se Electronics Reflexion Filter, The Reflexion Filter is basically a portable device for recording live sources with reduced room ambience. The main function is to help obtain a ‘dry’ vocal or instrument recording. This is especially useful in studios without proper acoustic treatment, but can...
SE ELECTRONICS SE 2A
SE Electronics SE 2A - small diaphragm condenser microphone with 3 capsules (cardioid, hypercardioid and omni), frequency response: 30Hz-20kHz, 300ohm impedance, 17dB equivalent noise level (A weighted), requires 48V phantom power (±4V). Includes clamp and wood case.
SE ELECTRONICS SE 1A STEREO SET
SE Electronics SE 1A stereo pair, matched pair of small diaphragm condenser microphones with cardioid pattern, incl. clamps and case, Frequency Response: 30Hz-20KHz, Sensitivity: 10mV/Pa - 40 ± 2dB(0dB=1V/Pa 1000Hz), Polar Pattern: Cardioid, Diversity, Impedance: = 300 Ohms, Equivalent Noise...
SE ELECTRONICS SE 1A
SE Electronics SE1A - small diaphragm condenser microphone with cardioid polar pattern, frequency response: 30Hz-18kHz, 300ohms impedance, 17dB equivalent noise level (A weighted), requires 48V phantom power (+/-4V).
SE ELECTRONICS Z 5600A MK II
SE Electronics Z 5600A mkII - large diaphragm tube microphone with 1.07" gold plated diaphragm, -10dB pad and lo-cut filter. Includes flight case, large shock mount and power supply. 9 patterns (switchable at the power supply), frequency response: 20Hz-20kHz, sensitivity: 14.1mV/Pa - 37 ± 1dB...
SE ELECTRONICS SE 4
SE Electronics SE 4, small diaphragm condenser microphone, cardioid capsule changeable (optional Hypercardioid and Omni capsule set), Frequency Response: 20Hz-20KHz, Equivalent Noise Level: 14dB(A weighted), Power Requirement: Phantom power 48V±4V, Shockmount and Case included
SE ELECTRONICS GEMINI II
SE Electronics Gemini II, large diaphragm dual tube microphone with cardioid pattern, one 12AX7 valve in the inputsection and one 12AU7 valve in the output (in place of the transformer ), incl. powersupply, shockmount and case, Frequency Response: 20Hz-20KHz, Sensitivity: 12.6mV/Pa - 38 ±...
SE ELECTRONICS SE 1000A USB
SE Electronics SE 1000a USB - cardioid polar pattern, frequency response: 20Hz-20kHz, 12dB equivalent noise level (A weighted), USB connection (via A to B USB cable), adaptive 44.1 to 48kHz sampling frequency.
SE ELECTRONICS SE 4 STEREO SET
SE Electronics SE 4 Stereo Set, matched Pair, small diaphragm condenser microphone, cardioid capsule changeable (optional Hypercardioid and Omni capsule set), Frequency Response: 20Hz-20KHz, Equivalent Noise Level: 14dB(A weighted), Power Requirement: Phantom power 48V±4V, Shockmount and Case...
SE ELECTRONICS SE 1000A
SE Electronics SE 1000a - condenser microphone, gold plated 1/2" diaphram, frequency response: 25Hz-20KHz, requires +48V phantom power (±4V). incl. built on shock cradle
SE ELECTRONICS SE 2200A USB
SE Electronics SE 2200a USB - cardioid polar pattern, 20Hz-20kHz frequency response, 12dB equivalent noise level (A weighted), USB connection (via an A to B USB cable), adaptive 44.1-48kHz sampling rate, zero latency headphone monitoring, built-in gain control, 10dB pad, bass cut, simultaneous...
SE ELECTRONICS RNR1
SE Electronics RNR1, Active Ribbon Studio Microphone Designed and built by Mr. Rupert Neve and sE Electronics, Acoustic Operating Principle: Electrodynamic pressure gradient with active electronics, Generating Element: 2.5-micron aluminum ribbon, Polar Pattern: Figure 8, Frequency Response:...
SE ELECTRONICS INSTR. REFLEXION FILTER SET
sE electronics Instrument Reflexion Filter Studio Set, set of 5 handy sized Absorber/Diffuser with mount for one small condenser microphone. Recommendable for instrument recordings. Several units can improve the signal separation on multi-mic recordings. Shipment with transport case, without...
SE ELECTRONICS SE 4400A
SE Electronics SE 4400A, Allround condenser microphone for Studio and Live, frequency response: 20Hz-20KHz, 4 polar patterns, Cardioid, Hypercardioid, Figure of 8 and Omni. 2 bass cuts at 60Hz and 120Hz; 2 pads at 10 and 20dB, twin diaphragm 1" capsule, requires +48V phantom power (±4V). incl....
SE ELECTRONICS SE R1 RIBBON
SE Electronics SE R1 Ribbon, 1.8 micron Aluminium membrane. Frequency Response: 30 -15,000 Hz +/- 3dB, Polar Pattern: Figure of 8, Max SPL: 135dB, Connector: 3-pin