Your search for items from the product category Studio Accessories  from manufacturer ART  yielded 15 results. Please click the X-symbol to unrestrict your search.

 
15 items found...

Sort results by: relevancealphabet (in ascending order)alphabet (in descending order)price (in ascending order)price (in descending order)user rating

	ART DTI ART DTI Dual Transformer/Isolator - a high quality, totally passive audio interface that uses a pair of high performance transformers to totally separate input and output signal grounds, thereby isolating two systems and reducing hum and ground-loop noise. The DTI's audio transformers have an...
	info   EUR  GBP

	ART S8 Microphone Splitter ART S8 - 8-channel microphone splitter. Can be used to split eight balanced low-impedance microphone signals into sixteen (eight pairs). One direct output and one transformer-isolated output on each channel, direct outputs pass phantom power from the input for use with condenser microphones,...
	info   EUR  GBP

	ART Cleanbox Pro ART Cleanbox Pro, Dual Channel Level Converter, XLR connectors for balanced inputs and outputs, RCA phono jacks and stereo 1/8" mini-phone jacks for unbalanced inputs and outputs, Unbalanced output level control, Balanced output level control, Rugged extruded aluminum case, Lighted On/Off...
	info   EUR  GBP

	ART S8-3-Way Microphone Splitter ART S8 3-Way - 8-channel, 3-way microphone splitter with passive interface. One direct and two transformer isolated outputs per channel, balanced XLR input and 3x balanced XLR outputs per channel, extremely wide frequency response, rack-mountable.
	info   EUR  GBP

	ART Dualxdirect ART Dualxdirect Active Dual DI Box - fully active design, 18-48V phantom powered or 9V battery powered, converts high-impedance balanced/unbalanced inputs into 600 Ohms balanced outputs, switchable input attenuation (0, -30dB), switchable ground lift, 1/4" TRS/XLR combo connector inputs, balanced XLR outputs, rugged extruded aluminium case. Frequency response: 10Hz-100kHz ± 0.5dB @ +0dBu. THD: <.05% (typical). Dynamic range: >100dB (typical). Channel separation: > 80dB (typical). Maximum input level: +4, +34dBu. Maximum output level: +6dBu (battery powered), +14dBu (phantom powered). Input connections: 1/4" TRS/XLR female balanced/unbalanced (x2), 470k Ohms. Thru connections: 1/4" TRS (2). Output connections: XLR male balanced (x2), < 600 Ohms. Input Attenuation: Switchable, (0, -30 dB), Power Requirements: 9V @ 7.5 mA (battery, alkaline recommended), 18 - 48V DC @ 6.4 mA (phantom power per channel), Dimensions: 99 x 117 x 47mm. Weight: 0.38kg
	info   EUR  GBP

	ART Splitcom Pro ART Splitcom Pro - split or combine low impedance balanced microphone signals. Low distortion with wide frequency response, two functions in one box, combines and/or splits, phase invert switch for subtractive combining, galvanic isolation to block phantom power between channel, ground lift...
	info   EUR  GBP

	ART Dualzdirect ART Dualzdirect, Fully passive Dual DI Box, high performance transformer design. No battery required, Converts 50k Ohm inputs into 600 Ohm balanced outputs, Switchable input attenuation (0, -20, -40 dB), Switchable low pass filter, Switchable phase invert, switchable ground lift (fully isolates inputs from chassis and outputs), XLR connectors for balanced outputs, Rugged extruded aluminum case, Frequency Response: 10 Hz - 50 kHz, ± 0.5 dB @ +4 dBu, THD: 0.01% typical @ 1 kHz, +18 dBu / <.05% @ 100 Hz, +18 dBu, Channel Separation: > 80 dB (typical), Input Connections: 1/4" TRS unbalanced (2), 50 k Ohm, Thru Connections: 1/4" TRS (2), Output Connections: XLR male (2), 600 Ohm, Input Attenuation: Switchable, (0, -20, -40 dB), Filter Type / Response: Switchable, low pass, -3 dB @ 30 kHz, Dimensions (DWH): 99 x 117 x 47 mm, Weight: 0.40kg
	info   EUR  GBP

	ART Dual RDB ART Dual RDB, Re-amping interface for multiple amps, Stereo/Dual direct box, Variable Input pad for mic or instrument inputs, Dual 1/4" TRS and XLR balanced line level inputs, Transformer isolated XLR balanced microphone level outputs, Transformer isolated 1/4" TRS balanced instrument level...
	info   EUR  GBP

	ART CleanBOX II ART CleanBOX II Hum Eliminator - hum in an audio system is often caused by loop effects which act like antennas. These loops can easily pick up a 60Hz (or higher harmonics) hum transmitted by electrical wiring. Typically, these loops are connected via grounds, more commonly called 'ground...
	info   EUR  GBP

	ART XDirect ART XDirect, Active DI Box - high quality interface that lets you connect instrument, line or speaker level signals to a mixer or other balanced input. The high impedance single-ended 1/4" and XLR inputs are buffered and converted by very low noise active electronics, into an isolated balanced...
	info   EUR  GBP

	ART Power Supply for Tube MP ART Tube MP Power Supply, fits for Tube MP, Tube MP Studio V3, Tube MP Project Series, Tube MP Project Series USB
	info   EUR  GBP

	ART ZDirect ART ZDirect, Passive DI-Box, The Zdirect is a high quality totally passive interface that lets you connect instrument, line, or speaker level signals to a mixer or other balanced input thru a high performance audio isolation transformer. The high impedance single-ended 1/4 input is converted...
	info   EUR  GBP

	ART SplitMix4 ART SplitMix4, 4 Channel passive hybrid mixer/splitter, Four Stereo Input Channels, Stereo Output, Independent stereo level controls are provided on each channel, Passive Design (No Power Supply Required), Over 90dB of Attenuation, All 1/4-inch connections are stereo TRS (Tip, Ring, Sleeve),...
	info   EUR  GBP

	ART Prosplit ART Prosplit, 1 channel Microphone splitter, 1x Mic Input XLR, 1x direct output XLR + 1x transformer isolated output with ground-lift switch, the direct output passes phantom power from the main mixer to the microphone, PAD Swicth for Input Channel
	info   EUR  GBP

	ART Tube MP/C ART Tube MP/C, Preamp/Compressor/Limiter/Di-Box, Tube-based mic/line preamplifier with up to 80 dB of gain, 12AX7a tube Hand-selected, optical (VCA-less) compressor circuitry, LED meters for Tube Warmth, Gain Reduction and Output level, Selectable output range for Line/Instrument interface...
	info   EUR  GBP

Offers include 20% British VAT and are valid as long as stocks last.
Shipping costs to the U.K. are 10 EUR (10 GBP), free shipping on orders above 199 EUR. Please click here for international Shipping rates.
We do not accept liability for typographical errors or inaccurate information of any kind.
*RRP = manufacturer's / distributor's recommended retail price in Germany