Tuoteryhmästä löytyi 46 tuotetta. Suosittelemme käyttämään navigaatiopalkin hakutoimintoa tulosten tarkentamiseksi.
Osumat 1 - 25 ovat listattuna ohessa.
Lajittele hakuosumat seuraavasti:
Sivu 1
EnttecDMX USB Pro Interface
Enttec DMX USB Pro - born from the Open DMX USB interface the PRO version is the ultimate USB DMX adapter for all computer based lighting needs. The pro is the fastest interface available with frame rates of up to 850 frames per second and is supported by all common operating systems. Micro...
EnttecDMX USB Pro MK2 Interface
Enttec DMX USB Pro MK2 Interface, DMX USB Pro MK2 Interface. The DMX USB PRO Mk2 is light-weight, portable, and ready for professional applications. The 'Pro2' supports two full universes of DMX512, it can be used as an output to control lights, or as input. Features: Fully backward-compatible...
EuroliteUSB-DMX512-PRO Interface
Eurolite USB-DMX512-PRO Interface, USB-DMX512-PRO Interface, Interface between notebook or PC and DMX devices, Tested with the following DMX lighting control software (available for free on the internet) FreeStyler from version 3.37, Drivers must be manually installed, Power supply via USB,...
StairvilleDMX Splitter 4
Stairville DMX Splitter 4 - four-way DMX distributor with one input and four outputs, electrically isolated, both 3- and 5-pin connectors, independent driver, data display for each output. Dimensions: 280 x 170 x 75mm
MA Lighting2Port Node onPC 512, 2xOut
MA Lighting 2Port Node onPC DMX-512 2x Out - rig-mounted box version for use in trusses or mobile applications. 2Port Node onPC runs with grandMA on PC. Powerful show controller for smaller applications, handy backup solutions for reduced budgets, 512 parameters, DMX-in for fader wings or...
EnttecODE with POE Open DMX
Enttec ODE - Open DMX Ethernet with POE (Power Over Ethernet). Born from the Open DMX USB and DMX USB Pro, the ODE is the industry's first affordable DMX Ethernet gateway. Out of the box, the ODE is configured as an Art-Net output node on universe 0:0 but can be easily and quickly changed...
StairvilleDMX Splitter 4 Mk II 19"
Stairville DMX Splitter 4 MkII - professional rack-mounting four-way DMX splitter, 1x DMX input, 4x DMX output, 3-pin & 5-pin XLR DMX in & out (electrically isolated), status and failure LEDs for DMX signal on each output. Dimensions: 19"/1U
EnttecOpen DMX USB Interface
Enttec Open DMX USB Interface - Allows any PC to send DMX signals via USB. GPL license: you are free to do whatever you want with the design, with the following restrictions: Any modification to the hardware or software must be given back to the community. You cannot remove or modify any ...
EnttecD-Split DMX Splitter
Enttec D-Split DMX Splitter, D-Split is an optical isolator/splitter for DMX512. Its purpose is to allow the user more flexibility in connecting their DMX controlled devices. Instead of having to make them all fit within a single daisy chain, each of the four outputs from the D-SPLIT can be...
VarytecWTR-DMX Transmitter/Receiver
VARYTEC, WTR-DMX, wireless (radio) DMX transmitter or receiver (switchable). Transmitter or receiver for wireless DMX data transmission. Interference-free wireless connection in the 2.45 GHz band, supports a single DMX 512 , you can use up to 16 WTR systems simultaneously. Power supply: 230V...
EnttecODE Open DMX Ethernet
Enttec ODE Open DMX Ethernet, ODE (Open DMX Ethernet). Born from the Open DMX USB and DMX USB PRO, the ODE is the industry's first affordable DMX Ethernet gateway. Out of the box, the ODE is configured as an Art-Net output node on universe 0:0 but can be easily and quickly changed using the...
EuroliteDMX Split 6X
Eurolite DMX Split 6X - 6-way DMX splitter for rackmounting, DMX distributor with one input and six outputs, absolute electric isolation between input and output or between output and output, two types of DMX connectors (3-pin & 5-pin) for each individual channel, every DMX output features an...
MA Lighting2Port Node onPC 512 In/Out
MA Lighting 2Port Node PC - rig-mounted box version for flexible use in trusses or mobile applications, 2Port Node onPC runs with grandMA onPC: powerful show controller for smaller applications, handy backup solutions for reduced budgets, 512 parameters (2Port Node onPC) or 1,024 parameters...
American DJD6 Branch DMX-Splitter
The American DJ D6-Branch is a 6-way DMX-Splitter that can be directly mounted onto truss with its integrated Velcros or by clamp. 6-way DMX Splitter, Can be mounted directly onto truss, 1 x 3-pin DMX In/Out on the Front, 6 x 3-pin DMX Out on the rear side, IEC power connector, On/Off Switch,
MA Lighting2Port Node onPC/Pro 1024 2xOut
MA Lighting 2Port Node onPC PRO - DMX 1024, 2x DMX out, rig-mounted box version for flexible use in trusses or mobile applications (2Port Node onPC runs with grandMA onPC). Powerful show controller with 1024 parameters (2Port Node onPC PRO), DMX in for fader wings or merging of DMX signals,...
GLPDMX-Distributor DB-4
GLP DB-4 - 4-way DMX distributor with one input and four outputs (3 and 5-pin). Independent driver for each output, includes rackmounts. Dimensions: 482 x 84 x 182mm (LxHxW). Weight: 3.5kg
BotexDr. DMX III DMX Tester
Botex Dr. DMX III DMX Check, The BOTEX DMX II Tester analyzes DMX signals. Expressly a survey of the actual, status on the DMX line is shown on the large and clearly arranged LCD display., solid plastic case Coated with matted black finish, 16 characters x 4 lines, DMX in/out via 3 or 5 pin...
ElationE-Node 8 II - Artnet/DMX
Elation E-Node 8 II - Artnet/DMX . E-Node 8 II - Artnet/DMX. The E-Node 8 is affordable ethernet/artnet node providing an ethernet input to 8 DMX Universe output. It is ideal for large pixel mapped dmx systems and compatible with most popular pixel mapping software controllers. By software...
BotexDMX Merge DM-2512
Botex DM-2512 DMX Merger 2x male DMX inputs on rear, 2x male DMX inputs on front, 2x female DMX outputs on rear, 1x female DMX output on front. Function mode: 2-position internal dip switch for selecting between 3 function modes: 'High Take Precedence' (HTP) mode (dip switch 1 & 2 are off),...
ElationDM-2512R DMX Merger
Elation DM-2512R DMX Merger, DM-2512R DMX., Specifications, - rack mount able, dual universe, DMX signal merger, - 3 selectable function modes- Merge, HTP and Back Up, - Merge: define a DMX-Channel split adress, below this Line A gets merged, above is Line B, - HTP: highest DMX Value is valid,...
EnttecDMX/RDM Splitter RDS8
Enttec DMX/RDM Splitter RDS8, DMX/RDM Splitter RDS 8. The RDS8 is DMX/RDM compatible 8 port fully isolated splitter. It allows users to build an RDM (E1.20-2006) compliant network DMX. Current DMX splitters will not allow RDM enabled devices to function properly, the RDS8 now solves this...
Hinnat sisältävät 24% ALV:n ja hinnat ovat voimassa toistaiseksi. Tuotteiden saatavuus voi vaihdella - kiireellisissä tilauksissa ota yhteyttä puhelimitse. Emme ole vastuussa kirjoitusvirheistä tai muista mahdollisista inhimillisistä tai tekniikasta johtuvista epätarkkuuksista annetuissa tiedoissa. *OVH = tuotteen ohjevähittäishinta Saksassa.
