pro snake XLR Patch Angled Male 0.5m

106

Balanced Audio Patch Cable

  • With right angle XLR male to straight XLR female
  • Length: 0.5 m
  • Neutrik connectors
  • Black
  • Made in Germany
Myynnissä vuodesta Joulukuu 2006
Tuotenumero 108217
Myyntierä 1 kappaletta
Length 50 cm
Colour black
Connector 1 XLR 3-pol female
Connector 2 XLR 3-pol male angled
20,90 €
Sis. ALV. Ei sisällä 12 € rahtikulua
Varastossa
Varastossa

Tuotetta on varastossa ja se voidaan lähettää heti.

Tietoa lähetyksestä
Arvioitu toimituspäivä Torstai, 2.05. - Perjantai, 3.05.
1

106 Asiakkaiden arviot

4.8 / 5

Sinun pitää kirjatua sisään, jotta voit arvostella tuotteita.

Huomio: jotta vältymme kuulopuheisiin, epätäydelliseen tietoon tai mainontaan perustuvia arvosteluja, niitä saa tehdä vain asiakas, joka on tuotteen meiltä ostanut.

Sisäänkirjautumisen jälkeen löydät kaikki arvosteltavat tuotteet kohdasta “Arvostele tuotteita” asiakastililtäsi.

Työnjälki

37 Arvostelut

J
Good quality xlr gable
Jani_L 06.01.2017
I bought this to make my audio interface fit better on my desk while microphone is connected to xlr input.

The best feature if this cable is easy adjustment of the orientation of the pins. Just loosen the rubber by twisting it and remove the metal top of the plug. Angle the pins as you like and put it back together.

No need to buy seperate right or left angled cables.
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
ap
Perfect for application
angled patch cable 27.11.2018
it took me a longer than id like to admit to figure out how to change the orientation of the angled end, but once i did it was a breeze.
the feel of the cable is good and the ends feel rugged and tuff.
have been using (heavily gigged) for over a year now and still works perfectly.
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
W
Angled cable that does the job
WelderOriginal 28.03.2024
Nothing specific to mention, really.
The angled side is designed to be popped open so you can rotate the XLR pins to roughly 10 different positions. This should suit 99% of building scenario. I used it to feed the "Balanced input" of my bass amp from a DI inside a rack and it works fantastic.
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
M
Solid cable
Mostro 29.04.2021
Solid cable, no noise and angle can be changed from one side to another, but you have to figure out by yourself.
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta