MIDI Solutions F8 Footswitch / MIDI Converter

8

8 - Foot Switch to MIDI Converter

  • 8 Jack inputs for 8 foot switch
  • Powered via MIDI
Myynnissä vuodesta Toukokuu 2006
Tuotenumero 183965
Myyntierä 1 kappaletta
Type MIDI Switch
LED Display Yes
PSU Connector No
Shape 19" / 1U
MIDI Interface Yes
MIDI Converter / Interface 1
339 €
Ilmainen toimitus sis. ALV:n
Varastossa
Varastossa

Tuotetta on varastossa ja se voidaan lähettää heti.

Tietoa lähetyksestä
Arvioitu lähetyspäivä Keskiviikko, 24.04. mennessä
1

8 Asiakkaiden arviot

4.5 / 5

Sinun pitää kirjatua sisään, jotta voit arvostella tuotteita.

Huomio: jotta vältymme kuulopuheisiin, epätäydelliseen tietoon tai mainontaan perustuvia arvosteluja, niitä saa tehdä vain asiakas, joka on tuotteen meiltä ostanut.

Sisäänkirjautumisen jälkeen löydät kaikki arvosteltavat tuotteet kohdasta “Arvostele tuotteita” asiakastililtäsi.

Käyttö

Ominaisuudet

Työnjälki

5 Arvostelut

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
F
Very flexible - the potential is limitless
Forty-Two 16.03.2020
I initially purchased a b-stock version to "play" with to see if it could solve a problem I was having, and now I have two and about to order a third. They are robust, and easy to program, and very flexible...

The initial problem I had was a guitarist was adding a looper to his stage set up, but due to the other pedals he uses, it was difficult to have the looper close enough to tap on the switches easily. So I connected the looper to the FB via MIDI, and then programmed the box to send CC# to 3 Boss FS-5U switches which could be then positioned in locations more fitting to his performance style.

The next implementation was to connect a Strymon Big Sky to the F8 via MIDI and send Program changes via Boss FS-5U switches. This allowed the Big Sky to be controlled from multiple positions on the stage, without the need to run back and forth across the stage, or have multiple units.

Only thing I would suggest is to get the power adapter (Item no: 258434). The box can be powered via MIDI, but getting the power adapter just made it easier as, once the box has been programmed it doesn't need to stay attached to a computer or MIDI Hub, so it can sit on the side of the stage, powered by the PSA.
Käyttö
Ominaisuudet
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta