Hay 50 artículos en este grupo de productos. Por favor, utilice la función de búsqueda en la barra de navegación para restringir ulteriormente los resultados.
Se muestran entradas de 1 a 25.
Clasificar los resultados según:
Behringer MX882 Ultralink Pro
Behringer MX882 Ultralink Pro splitter/mixer - 2in/6out or 8in/2out, stereo main in/out switch, 6 channels with level and balance, pan switches, XLR main input/output, 4 channels with XLR I/O's, 2 channels with jack I/O. Dimensions: 19" x 1U.
the t.racks Eight
the t.racks Eight - 8-channel microphone splitter, 8x XLR inputs, 16x XLR outs, direct output and link out per channel, phantom power link to main out, output ground lift switch, switchable input link. Dimensions: 19"/1U
Radial Engineering Tonebone Bigshot ABY
Radial Engineering Tonebone Bigshot ABY - the little brother of the Switchbone, switch between two amps or both together, ground lift, phase switch, tuner output.
Lehle P-Split II
Lehle P-Split II Passive Splitter - simultaneous routing of one instrument to two amps, outputs galvanically separated LTHZ high end transformer to eliminate hum, phase reverse & ground lift switches with gold contacts.
ART S8 Microphone Splitter
ART S8 - 8-channel microphone splitter. Can be used to split eight balanced low-impedance microphone signals into sixteen (eight pairs). One direct output and one transformer-isolated output on each channel, direct outputs pass phantom power from the input for use with condenser microphones,...
Palmer PLS-02 Line Splitter
Palmer PLS-02 Line Splitter Box - 2-channel splitter with female XLR inputs, parallel male XLR output plus two male transformer balanced XLR outputs, ground lift switch. Includes 5-year warranty.
Little Labs Redeye 3D Phantom
Little Labs Redeye 3D Phantom - passive DI/re-amp/expansion splitter unit, 1/4" TRS instrument input, 1/4" TRS instrument re-amp output, XLR line in, mic level out (XLR), expansion I/O (1/4" TRS), phase invert, pad switch.
the t.racks DS2418
The T.Racks DS2418 Audio Splitter - 2:4 or 1:8, each output is controllable with its own volume control, XLR inputs & outputs. Dimensions: 19"/1U (depth: 12cm)
Radial Engineering X-AMP
Radial Engineering X-AMP active re-amping box - transforms a +4dB signal into a hi-impedance signal for connection to guitar amps or FX pedals, 1x XLR in, 2x jack out, phase reverse switch, output gain control. Includes power supply.
ART S8-3-Way Microphone Splitter
ART S8 3-Way - 8-channel, 3-way microphone splitter with passive interface. One direct and two transformer isolated outputs per channel, balanced XLR input and 3x balanced XLR outputs per channel, extremely wide frequency response, rack-mountable.
Millenium HX 3
Millenium HX3 Active Guitar Splitter - for use with 2 amps in parallel, unbalanced jack input, jack link out, isolated jack out with switchable phase reverse, Lo-Z jack out, adjustable gain. Requires 1x 9V battery or optional 9-15V DC power supply.
Klark Teknik Square One Splitter
Klark Teknik Square One Splitter – 8-in/24-out splitter with gain controls, 30Hz lo-cut filter, 48V phantom power, solo and 4-segment LEDs per channel, headphone output, inputs on front and rear (with switcher), 8x outputs at front, 16x outputs at rear. Dimensions: 19"/2U
ART Splitcom Pro
ART Splitcom Pro - split or combine low impedance balanced microphone signals. Low distortion with wide frequency response, two functions in one box, combines and/or splits, phase invert switch for subtractive combining, galvanic isolation to block phantom power between channel, ground lift...
Radial Engineering HotShot DM1
Radial Engineering HotShot DM1, microphone muteswitch and splitter as footpedal, for dynamic microphones, switchable GDN-Lift, XLR in/out, also as Talkback between musician and crew or to mute Hardware as Vocalists etc.
Drawmer DA6
Drawmer DA6, 2x6 Stereo Distribution Amp with Monitoring, 1 set of stereo (2) XLR inputs, 6 sets of stereo (2) XLR outputs, Input stage has LED level meter, Each output channel can be switched to mono, Each output channel can be individually monitored, Built-in headphone amp, Optional...
Palmer MI DMS
Palmer MI DMS, switch for dynamic microphones, 1x XLR Input, 2x XLR Output, footswitch, to switch between Technican and FOH, split for different microphone channels, split for different zones
Ofertas incl. 18% IVA y válidas hasta agotar existencias. Gastos de envío a España son 20 EUR, envíos gratis en pedidos por encima de 299€. Consultar en los envíos a Canarias, Ceuta, Melilla y Baleares. Por favor clic aquí para envíos internacionales. No aceptamos responsabilidades por errores tipográficos o erratas. *PVP = Precio de venta al público recomendado por los fabricantes en Alemania.
