The Look Viper S with 650 Watt and a powerful output of approx. 8 meters perfectly completes the Viper range. This fog generator with 650 Watt and an powerful output of approx. 8 meters perfectly completes the Viper range. The Viper S is made for smaller stages and Clubs. Due to its compact design and the light weight, the machine can also be assembled for mobile uses. The Viper S is characterised ba a low power- and fluid consumption but a powerful output. Thus, the operating costs are low and the Viper S coincidental is energy-saving without cutting back the output. Equipped with all features and the usual reliability of the whole Viper range, the Viper S is an inexpensive alternative to bigger machines. The Viper S can be controlled via DMX 512. The connection is done with 5pin-XLR-plugs. The DMX start address can be adjusted and saved via the control panel. The machine can also be controlled with analog (0 - 10 V) via a lighting desk or via XLR-remote (option). This connection is done with 3pin-XLR-plugs. A stand-alone-mode is also possible. The adjustments are done directly at the machine. A short press at the start button makes the machine run. Therefore a permanent pressing of the start button is unnecessary. A radio remote (Thomann Item: 229864) is also available as an option. With the internal timer the fog time can be exactly adjusted in seconds, the wait time in minutes and the output in %. The control panel with LED-display, simple symbols allow for easy operation. It also protects the control buttons against dirt. Digital technology makes fine adjustment of the pump possible. In steps of 1% the output can be adjusted from 0 - 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can be produced. This enables the viper nt to be used in both small and large locations.