Harley Benton PowerPlant Tuner

290

Tuner Pedal with Built-In power Supply for Additional Pedals

  • Chromatic floor tuner with built-in multi-power supply
  • Suitable for guitars and basses
  • Dimensions including switch and sockets (W x H x D): 70 x 55 x 122 mm
  • Weight (without power supply): 300 g
  • Includes stabilized DC power supply (AC 100-240 V), 8 DC cables and 2 cables for reversing the polarity

Tuner:

  • Large LC display
  • True Bypass
  • Tuning range: 12 - 4186 Hz
  • Accuracy: ± 1 cent

Power supply:

  • 6 Outputs: 9 V / 100 mA
  • 2 Outputs: 9 V / 500 mA
  • Total output: 1600 mA
  • Isolated sections
  • Polarity: Center negative
  • Short circuit and over-voltage protection
K dostání od Prosinec 2015
Číslo produktu 372334
Prodejní jednotka 1 ks
DC/AC current DC
Output current in mA 1600 mA
9 V Yes
12 V No
18 V No
Secondary voltage No
Multi-output power supply Yes
Chromatic 1
Display LCD, LED
PSU Connector 1
Design Floor Tuner
Special Features 6x 9V/100mA & 2x 9V/500mA Power Outs
Dimensions 70 x 55 x 122
Weight 300 g
Zobrazit víc
1 650 Kč
Cena vč. DPH nezahrnuje poštovné 295 Kč
Na skladě
Na skladě

Tento produkt je na skladě a může být obratem odeslán.

Informace o expedici
Odešleme pravděpodobně do Čtvrtek, 25.04.
1

290 Hodnocení zákazníků

4.2 / 5

Musíte být přihlášeni, pokud chcete hodnotit produkty.

Upozornění: Abychom zabránili tomu, že se budou hodnocení zakládat informacích z doslechu, polovičních pravdách nebo skryté reklamě, dovolujeme na našich stránkách hodnotit pouze skutečným uživatelům, kteří u nás vybavení také koupili.

Po přihlášení najdete také v zákaznickém centru v sekci "Hodnotit produkty" všechny produkty, které můžete hodnotit.

Zpracování

211 Recenze

MH
No issues so far
Matej H. 17.04.2020
The tuner is good, better than some others for the same price I owned. I've tried to tune up to 8 string guitar and 6 string bass with no issues registering the lows whatsoever.

The power source seems to be fine so far. I put two digital pedals on the 500mA circuit and several analog pedals on the 100mA circuit and no noise issues whatsoever. I did not try putting analog and digital pedals in the same circuit because I know that would increase the risk of noise.

Overall, it's nice, works great, and appears to be built to last. Having a tuner in your pedalboard is a very good idea and having one built into a power supply is great if you want to save space as much as possible.
Zpracování
0
0
Ohlásit hodnocení

Ohlásit hodnocení

A
Napajanie pedalov v Boarde + ladicka
Anonymní 16.08.2016
Maximalna spokojnost!!! nevymenil by som ju za nic...
Zpracování
1
0
Ohlásit hodnocení

Ohlásit hodnocení

MV
Harley Benton PowerPlant Tuner
Martin Valach 20.06.2022
HB PowerPlant Tuner som si hlavne z priestorovych dovodov zaobstaral na napajanie mensieho pedalboardu s 5-6 efektmi.

Funkcia napajania: po viac ako roku pouzivania spokojnost, ziadny sum, piskanie, praskanie, efekty funguju spravne. Pouzivam "klasicke" efekty, takze ako zvlada vacsie digitalne krabicky typu Strymon neviem posudit.

Ladicka: super - rychla, presna (casto preladujem 6-strunnu gitaru napr do C#, alej aj roznych otvorenych ladeni a zvlada to v pohode), vyborne viditelny (az ziariaci) displej.

Na domace hranie, pripadne skusanie urcite odporucam.
Celkovy dojem - na prvy pohlad posobi trochu "hrackarsky", ale to je v tejto cenovej urovni lahko odpustitelny detail...
Zpracování
0
0
Ohlásit hodnocení

Ohlásit hodnocení

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
Z
Works as a power supply, not really as a tuner
Zef 17.02.2022
For someone who needs both a power supply and a tuner this seems like a pretty good deal. However as soon as I put it in my signal chain I got amazing 1950's flying saucer effects all over my sound, especially when turning up the gain.

The bad:
Tried it at different parts of the chain, with different amplifiers and at a studio with the same result. The only way to keep it plugged in without sounding like an Ed Wood flick was to plug it in my amplifier's headphone jack, so that it's actually outside the signal chain. I still need to switch to a clean sound for tuning to work properly. The tuning accuracy isn't great either.

The good:
On the upside it works fine as a power supply in my experience: two 9V/500mA for my digital pedals and 6x 9V/100mA for the rest covers your basic needs. Doesn't seem to add noise to the pedals' sound. The kit has what you need for most cases: 2A 9V DC power supply for the pedal itself, cables of different lengths and two cables for inverting polarity for those center-positive outliers.

In conclusion:
I would not recommend as a tuner as I needed to find a workaround for the noise it generates through the audio output, but works fine as a power supply (at least for my pedals).
Zpracování
3
0
Ohlásit hodnocení

Ohlásit hodnocení