Doepfer A-110-2

29

Basic VCO for the A-100 modular system

  • Voltage controlled oscillator
  • 3-Position toggle switch
  • Linear FM input and soft-sync input
  • Tune control range can be set between approx. 1/2 octave and 4 octaves via a jumper
  • Width: 8 HP / 40.3 mm
  • Depth: 50 mm (measured from the rear of the front panel)
  • Power requirements: + 12V: 150 mA (warm up period about 30 seconds), 60 mA (continuous operation) -12V: 30mA
K dostání od Prosinec 2014
Číslo produktu 354853
Prodejní jednotka 1 ks
Analog Yes
Digital No
Width 8 TE / HP
variants Doepfer
3 111 Kč
Cena vč. DPH nezahrnuje poštovné 295 Kč
Na skladě
Na skladě

Tento produkt je na skladě a může být obratem odeslán.

Informace o expedici
Odešleme pravděpodobně do Čtvrtek, 25.04.
1

29 Hodnocení zákazníků

4.6 / 5

Musíte být přihlášeni, pokud chcete hodnotit produkty.

Upozornění: Abychom zabránili tomu, že se budou hodnocení zakládat informacích z doslechu, polovičních pravdách nebo skryté reklamě, dovolujeme na našich stránkách hodnotit pouze skutečným uživatelům, kteří u nás vybavení také koupili.

Po přihlášení najdete také v zákaznickém centru v sekci "Hodnotit produkty" všechny produkty, které můžete hodnotit.

Ovládání

Vlastnosti

Zpracování

15 Recenze

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
A
High quality, and surprising differences from A-110-1
Anonymní 18.12.2015
The A-110-2 Basic Oscillator is a great-sounding oscillator, with interesting additions to the A-110-1 Standard Oscillator. While the -1 has a 5-position switch for octave, the -2 has only 3 positions. The -2 also sacrifices the sine output from the -1.

While the -1 has linear FM (i.e. a second 1V/Oct CV input with an attenuator), the -2 also has exponential FM. And while the -1 has a sync input, the -2 has both hard and soft sync inputs. The -2 has only one input for pulse width - but that seems like a reasonable sacrifice for the other features.

I find that the A-110-2 doesn't track as well as the A-110-1 in high ranges, and the sound is a bit "grittier" than the A-110-1. I actually like the square wave output of the -2 better than that of the -1, and since I have two of each, I tend to use them together to add texture to patches.

All in all, for the small price savings and the 2HP difference in width, I would tend to buy the -1 first - but I would buy a -2 to go with it, too.
4
0
Ohlásit hodnocení

Ohlásit hodnocení

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
KZ
Excellent !!
Kamil Z. 16.05.2016
Really great VCO it complements the Standard more expensive VCO very well. the soft sync is a must and differs a lot from hard sync, be careful though this unit is rather higly tuned and 0 pos does not correspond to 0 on the standard VCO, you can tune it down 2 octaves so no issues but will remain 1 octave above the lowest setting of the standard 110.

Higly recommended.
2
0
Ohlásit hodnocení

Ohlásit hodnocení

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
A
Good compact VCO
Anonymní 15.03.2016
Affordable and compact which is good if rack space is a concern. I use it as an addition to my Arturia Microbrute but it sounds great even on its own with a few effects.
0
0
Ohlásit hodnocení

Ohlásit hodnocení

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
O
..is doepfer
Oskars 30.12.2016
Great features. Solid sound. Not a very shallow module.
0
0
Ohlásit hodnocení

Ohlásit hodnocení